InSight Archives

October 3, 2019October 3, 2019 by Evan Gough

Here’s NASA’s New Plan to Get InSight’s Temperature Probe Into Mars

The mole with its wiring harness, and the scoop. Image Credit: NASA/JPL-Caltech

The mole is still stuck.

The mole is the name given to the Heat Flow and Physical Properties Package (HP3) instrument on NASA’s Mars InSight lander. It’s job is to penetrate into the Martian surface to a depth of 5 meters (16 ft) to measure how heat flows from the planet’s interior to the surface. It’s part of InSight’s mission to understand the interior structure of Mars, and how it formed.

But it’s stuck at about 35 centimers (14 inches.) The mole can do science shy of its maximum depth of 5 meters, but not this shallow. And NASA, and the DLR (German Aerospace Center) who provided the mole, have a new plan to fix it.

October 2, 2019October 2, 2019 by Evan Gough

InSight Has Already Detected 21 Marsquakes

NASA's SEIS instrument on the Martian surface. SEIS is protected by a dome. Image Credit: NASA/JPL-Caltech

The SEIS (Seismic Experiment for Interior Structure) instrument on NASA’s InSight lander has sensed 21 Marsquakes since it was deployed on December 19th, 2018. It actually sensed over 100 events to date, but only 21 of them have been identified as Marsquakes. SEIS is extremely sensitive so mission scientists expected these results.

SEIS is a key part of InSight, NASA’s mission to understand the interior of Mars. Along with other instruments, it’ll help scientists understand what’s going on inside Mars.

July 3, 2019July 3, 2019 by Evan Gough

NASA’s Still Trying to Get InSight’s Mole Working Again. Progress is Slow.

The Heat Flow and Physical Properties Package deployed on the Martian surface. Image Credit: NASA/DLR

The InSight lander has been on Mars for 213 Sols on its mission to understand the interior of the red planet. It’s armed with a seismometer, a temperature and wind sensor, and other instruments. But it’s primary instrument, arguably, is the Mole, or the Heat Flow and Physical Properties Package (HP3.) And the Mole has been stuck for a while now.

June 14, 2019June 14, 2019 by Evan Gough

This is What the Ground Looked Like After InSight Landed on Mars

The gnarly surface of Mars, with two pits excavated by InSight's thrusters. Image Credit: NASA/JPL-Caltech

When InSight landed on Mars on Nov. 26th, 2018, it deployed a parachute to slow its descent through the thin Martian atmosphere. As it approached the surface, it fired its retro rocket to slow it even more, and then gently touched down on the surface. As it did so, its retro rockets excavated two small pits in the Martian soil.

June 5, 2019June 5, 2019 by Evan Gough

Engineers are Still Troubleshooting Why Mars InSight’s Mole is Stuck and Won’t Go Any Deeper

The support structure for the Heat Flow and Physical Properties Probe. Image Credit: NASA/JPL-CalTech.

NASA’s Mars InSight Lander was always a bit of a tricky endeavour. The stationary lander has one chance to get things right, since it can’t move. While initially the mission went well, and the landing site looked good, the Mole is having trouble penetrating deep enough to fulfill its mission.

April 15, 2019April 15, 2019 by Evan Gough

Scientists are Trying to Figure Out Why InSight’s “Mole” Can’t Dig Any Deeper

The HP3 model in its test bed in Bremen. Image Credit: DLR.

Engineers at the German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt; DLR) are busy working with a replica InSight Lander to see if they can understand what’s blocking the lander’s mole.

The mole is the short name for the lander’s Heat Probe, which is hammering its way into the Martian surface. The Heat Probe is actually called the HP3, or Heat and Physical Properties Package. It’s designed to work it’s way as far as 5 meters (16.4 ft.) into the soil, where it will measure the heat flowing from the interior of the planet. Those measurements will tell scientists a lot about the structure of Mars, and how rocky planets formed.

But as reported last month, the probe is being blocked at about 30 cm (1 ft.)

March 5, 2019March 5, 2019 by Evan Gough

InSight’s Rock-hammer is About Half a Meter Down and has Already Run into Rocks.

NASA’s InSight lander is busy deploying its Heat Flow and Physical Properties Package (HP3) into the Martian soil and has encountered some resistance. The German Aerospace Center (DLR), who designed and built the HP3 as part of the InSight mission, has announced that the instrument has hit not one, but two rocks in the sub-surface. For now the HP3 is in a resting phase, and it’s not clear what will happen next.

February 14, 2019February 14, 2019 by Evan Gough

InSight has Placed its Heat Probe on the Martian Surface. The Next Step is to Jackhammer Down 5 Meters and Hope it Doesn’t Encounter a Large Rock

The HP3 on the surface of Mars. Image Credit: NASA/JPL-Caltech/DLR

NASA’s InSight lander has finally placed its heat probe on the surface of Mars. The Heat Flow and Physical Properties Package (HP³) was deployed on February 12th, about one meter away from SEIS, the landers seismometer. Soon it’ll start hammering its way into the Martian soil.

February 7, 2019February 7, 2019 by Evan Gough

InSight Just Put a Windshield Over its Seismometer

The InSight lander has deployed SEIS's wind and thermal shield. Image Credit: NASA/JPL-CalTech

NASA’s InSight lander arrived on Mars on November 26th, 2018. Since then, it’s been busying itself studying its landing spot, and taking its time to carefully place its instruments. It spent several weeks testing the seismometer and adjusting it, and now it’s placed the domed, protective shield over the instrument.

December 21, 2018 by Evan Gough

InSight Just Placed its Seismometer onto the Surface of Mars to Listen for Marsquakes

This copper-colored hexagonal box is an insulating container for SEIS. Image Credit: NASA/JPL-Caltech

NASA’s InSight lander has deployed its first instrument on the surface of Mars. On December 19th, the stationary lander used its robotic arm to deploy the SEIS (Seismic Experiment for Interior Structure), marking the first time a seismometer has been placed on the surface of another planet. This is a milestone for the mission, and one that comes well ahead of schedule.

InSight landed on Mars at Elysium Planitia on November 26th. Since then, it’s been checking out its immediate surroundings with its cameras to find the perfect spot to deploy the seismometer, and its other deployable instrument, the HP3 (Heat Flow and Physical Properties Package.) Mission planners allocated several weeks for instrument site selection, so this is well ahead of schedule.
Continue reading “InSight Just Placed its Seismometer onto the Surface of Mars to Listen for Marsquakes”