Technicians at the DLR's Institute for Solar Research inspecting lamps in the Synlight. Image: DLR/Markus Hauschild.
Hydrogen is the most abundant element in the Universe. But here on Earth, it’s rather rare. That’s unfortunate, because in our warming world, its status as an emissions-free fuel makes it a coveted chemical. If German researchers are successful, their Synlight project will help make renewable hydrogen fuel a reality.
Dubbed the “artificial Sun”, the Synlight uses concentrated light to power Thermochemical Water Splitting (TWS.) Every school child knows you can produce hydrogen by electrolysis—running an electric current through water. But that takes an enormous amount of electricity. TWS might be a better way of getting hydrogen out of water, but it takes an enormous amount of energy too, and that’s what the German research is about.
When combusted with pure oxygen—inside a fuel cell for example—hydrogen’s only waste product is water. No greenhouse gases or particulates are produced. But if we want to use it to power our cars, buses, trucks, and even airplanes, we need enormous amounts of it. And we need to produce it cost-effectively.
“Renewable energies will be the mainstay of global power supply in the future.” – Karsten Lemmer DLR Executive Board Member
The idea is to use the heat generated by Concentrated Solar Power (CSP) to extract hydrogen from water, thereby eliminating the need for electricity. CSP systems use mirrors or lenses to concentrate a large area of sunlight into a small area. The heat from that action can be used to power TWS. The Synlight project in Germany is demonstrating the viability of TWS by mimicking the effect of concentrated sunlight. In doing so, researchers there are building what’s being called the world’s largest artificial Sun.
Each of Synlight’s 149 zenon short-arc lamps can be controlled individually. Image: DLR/Synlight/Markus Hauschild
German researchers at the German Aerospace Center (DLR) at Julich near Cologne built the Synlight, a system of 149, high power lamps of the type used in film projections. When all these lamps are turned on, Synlight produces light that is about 10,000 times more intense than natural sunlight on Earth. When all the lamps are aimed at a single spot, Synlight generates temperatures up to 3000 Celsius. The challenge now is to develop materials and processes that can operate in such an extreme temperature.
The 15m tall Synlight experiment is housed in this building in Julich. The building contains 3 separate radiation chambers for different experiments. Image: DLR CC By 3.0
The Synlight system itself uses an enormous amount of electrical power to operate. But that’s often the case with experimental facilities. The Synlight project will mimic the effect of intense, continuous solar energy, something that is not readily available in Germany. By building a test facility powered by electricity, researchers will be able to reliably perform experiments without being delayed or affected by cloudy weather.
“Fuels, propellants and combustibles acquired using solar power offer immense potential for long-term storage and the production of chemical raw materials, and the reduction of carbon dioxide emissions. Synlight will enhance our research in this field.” – Karsten Lemmer, DLR Executive Board Member
As Johannes Remmel, the North Rhine-Westphalia Minister for Climate Protection, said, “”We need to expand existing technology in practical ways in order to achieve renewable energy targets, but the energy transition will falter without investments in innovative research, in state-of-the-art technologies and in global lighthouse projects like Synlight.”
The DLR is involved in the PS10 solar power tower in Spain. The PS10 is the world’s fist commercial concentrating solar power tower. Image: By afloresm – SOLUCAR PS10, CC BY 2.0, https://commons.wikimedia.org/w/index.php?curid=2821733
This is not the German Aerospace Center’s first foray in concentrated solar power. They’re involved in a number of projects to advance concentrated solar power and thermal water splitting. The DLR is a partner in the Hydrosol II pilot in Spain. It’s a reactor for solar thermochemical hydrogen production that has been in operation since 2008. They’re also involved in the first commercially operated solar tower plant, an 11 megawatt system in Spain called the PS10 solar power tower.
A reconstruction of a T. Rex at the Field Museum of Natural History, Chicago. This is Sue, the world's largest and most complete dinosaur skeleton. Image: By Connie Ma Uploaded by FunkMonk, CC BY-SA 2.0, https://commons.wikimedia.org/w/index.php?curid=20207230
To kids, there are only two kinds of dinosaurs: meat-eaters and plant-eaters. But to paleontologists, those are just diet distinctions. Paleontologists divide dinos into two different groups based largely on pelvic structure: reptile-hipped saurischians, and bird-hipped ornithischians.
Those two categories are called ‘clades’, and they’re fundamental to the study of dinosaurs. But a new study is casting doubt on those two groups, as well as moving the infamous Tyrannosaurus Rex to a new spot on the dinosaur family tree.
The study, by Matthew G. Baron, David B. Norman & Paul M. Barrett, was published in the journal Nature. If the findings in this study are accepted by paleontologists, then it will upset our understanding of the family tree that was first established in Victorian times.
Pelvic Structure of a reptile-hipped saurischian. Image: By Fred the Oyster, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=35371104Pelvic structure of a bird-hipped ornithischian. Image: By Fred the Oyster, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=35371104
The T. Rex is the most famous member of the reptile-hipped saurischians. Many other carnivorous theropods are saurischians too, like Giganotosaurus and Spinosaurus. Other famous dinosaurs, like Stegosaurus, are bird-hipped ornithischians. The distinction between the saurischians and the ornithischians has been workable for a long time. But there were always problems with the two clades of dinosaurs.
The Dinosaur Family Tree. Image: By Evolution_of_dinosaurs_by_Zureks.svg: Zureksderivative work: Woudloper (talk) – Evolution_of_dinosaurs_by_Zureks.svg, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=6321464
Some of the earliest ornithischian dinosaurs in the Triassic period had some theropod qualities: they were bipedal and probably meat-eaters. This clouded the separation between ornithischians and saurischians. There are also the herrerasaurids, small dinosaurs not larger than 4 meters long. They were some of the earliest dinosaurs, carnivores that look like both sauropods and theropods, and even though they appear early in the fossil record, they are not considered ancestors to any other group of dinosaurs. They show a mixture of both primitive and derived traits.
Huge plant-eating sauropods like the Brontosaurus and the Diplodocus are included in the reptile-hipped saurischians with the meat-eating theropods, even though there are some key skeletal differences between the two groups.
Another problem centers around birds. Believe it or not, birds have theropods as ancestors, even though theropods are in the reptile-hipped clade, rather than the bird-hipped clade.
Are You Confused Yet?
If this all seems kind of confusing, let’s back up for a minute.
When we think of dinosaurs, we tend to think of full-scale rebuilt skeletons of the type on display in museums around the world. But for paleontologists, the reality is much different. Many dinosaur species are known only by a few bones or teeth. These samples are studied in great detail. Any groove in a bone or slightly different shape in a tooth is analyzed, and out of this a dinosaur family tree is constructed.
It’s hard work, and our fossil record is spotty at best. Some new dinosaur taxa are proposed based only on the discovery of isolated teeth in the fossil record. With all of this in mind, you can see that the dinosaur family tree is an ongoing work in progress.
The authors of the study say that many ornithischian dinosaurs were overlooked in the past, because paleontologists didn’t really know what to do with them. Many of the ornithischians had weird traits like extra chin bones and molar-like teeth in their cheeks. These ornithischian dinos were thought of as oddities, early offshoots from other species.
New Clades
The authors studied 457 traits in 74 taxa, looking at details like the shapes of tiny eye-socket bones and grooves on femurs. They found that Theropods, even though they have reptile-like hips, don’t belong in the saurischian clade. They’re suggesting that Theropods are a sister clade to the ornithischians. The revised grouping of Ornithischia and Theropoda has been named the Ornithoscelida. The authors are also proposing that the herrerasaurids did not branch off as early as previously thought, and should form a sister clade with the sauropods.
But this study does even more. It’s been long understood by paleontologists that dinosaurs appeared in the southern hemisphere first. That’s where the herrerasaurids were found, dating back to 240 million years ago. The authors remind us that there are very few Herrerasaurus skeletons and bones, and there are uncertainties in the age of the Triassic fossil beds where herrerasaurids are found. A nearly complete skeleton was found in Argentina, and less complete ones have been found in North America.
But this shuffling of the family tree moves the herrerasaurids further away from the base of the tree. Remember, the herrerasaurids look like both sauropods and theropods, and they show both derived and primitive traits. If it’s accepted that the herrerasaurids did not appear as early as thought, that might mean that dinos did not appear first in the southern hemisphere. The authors say that some enigmatic fossils found in the northern hemisphere should be re-examined in case they are earlier than the ones found in the south.
Enter the Saltopus
A fossil of a cat-like creature found in Scotland, called the Saltopus, is a part of the shake-up of the dinosaur family tree. It was considered a pre-cursor to dinosaurs, rather than a true dinosaur. As part of their analysis, the Saltopus has been re-positioned in the earliest part of the dinosaur lineage, as the first true dinosaur. This supports the idea that dinosaurs appeared first in the northern hemisphere rather than the south.
The Saltopus, a small cat-sized dinosaur found in Scotland. If it is the first dinosaur, that means dinosaurs originated in the northern hemisphere rather than the south. Image: By Nobu Tamura email:[email protected] http://spinops.blogspot.com/ http://paleoexhibit.blogspot.com/ – Own work, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=50251442
If this new family tree for dinosaurs is accepted, it will change our understanding of the way dinosaurs evolved. We’ve relied on similarity in hip shape to ascertain ancestry, but that may be a little simplistic.
Our understanding of dinosaurs changes frequently. Remember when dinosaurs were slow, dim-witted creatures with tiny brains and huge bodies? Now we think of dinosaurs as feathered and fast, using cunning and perhaps teamwork to hunt in packs. Remember when the prevailing wisdom was that some dinosaurs got so large and spiny that they were doomed to extinction? That was proven false as well.
If it does stick, this new family tree will be a huge change in paleontology, a field where knowledge is overturned on a regular basis, sometimes by little more than a few teeth.
The SpaceX Dragon CRS-10 spacecraft is pictured seconds before splashing down in the Pacific Ocean on Mar. 19, 2017 after departing the International Space Station (ISS). Credit: SpaceX
The SpaceX Dragon CRS-10 spacecraft is pictured seconds before splashing down in the Pacific Ocean on Mar. 19, 2017 after departing the International Space Station (ISS). Credit: SpaceX
KENNEDY SPACE CENTER, FL – SpaceX’s tenth contracted resupply mission to the International Space Station came to a safe conclusion with a splashdown of the Dragon spacecraft in the Pacific Ocean Sunday and successfully returned a treasure trove of more than two tons of precious science experiments and research samples from the space station.
Researchers on Earth are eagerly awaiting the science data and samples in order to carry out high powered laboratory analysis that will eventually yield the fruits of the hard won labor – years in the making.
The Dragon CRS-10 cargo freighter departed the International Space Station (ISS) Sunday morning after Expedition 50 astronauts Thomas Pesquet of ESA (European Space Agency) and Shane Kimbrough of NASA released the spacecraft from the grip of the station’s 57.7-foot-long(17.6-meter) Canadian-built Canadarm2 robotic arm as planned at 5:11 a.m. EDT, March 19.
After carefully maneuvering away from the orbiting outpost and six person international crew at an altitude of appox. 250 miles (400 km), Dragon eased away to a safe distance.
SpaceX’s Dragon CRS-10 cargo vehicle is attached to the International Space Station on Feb 23, 2017 after early morning capture by astronauts Shane Kimbrough and Thomas Pesquet using the robotic arm and subsequent berthing at Earth facing port on the Harmony module. It will stay for a month. Credit: NASA
The vessel then fired its braking thrusters a few hours later to initiate the reentry burn that would set the craft on course for a fiery plummet through the Earth’s atmosphere.
Some five and a half hours later the spaceship carried out a parachute assisted splashdown in the Pacific Ocean at 10:46 a.m. EDT, about 200 miles southwest of Long Beach, California.
The highest priority research and technology cargo will be removed from Dragon immediately and returned to NASA.
SpaceX CRS-10 Dragon supply ship launched on Feb. 19, 2017 from NASA’s Kennedy Space Center in Florida successfully arrives at the International Space Station on Feb. 23, 2017 for capture and berthing at station port on the Harmony module. Credit: NASA
The rest will travel back to port and be prepared for a return trip to SpaceX’s test facility in McGregor, Texas, where the remaining scientific samples, research experiments and technology gear and hardware will be unloaded for NASA.
Dragon had spent nearly a month berthed at the Earth-facing port on the station’s Harmony module, since arriving on Feb 23.
Dragon begun its space voyage after it was launched from the Kennedy Space Center (KSC) on Sunday, Feb. 19 on the first Falcon 9 rocket ever to blast off from historic launch pad 39A in a blaze of glory – as I reported here.
Historic maiden blastoff of SpaceX Falcon 9 rocket from Launch Complex 39A at the Kennedy Space Center) at 9:38 a.m. EDT on Feb 19, 2017, on Dragon CRS-10 resupply mission to the International Space Station (ISS) for NASA. Credit: Ken Kremer/kenkremer.com
At liftoff, the Dragon CRS-10 space freighter was carrying more than 5500 pounds of equipment, gear, food, crew supplies, hardware and NASA’s Stratospheric Aerosol Gas Experiment III (SAGE III) ozone mapping science payload to the low Earth orbiting station in support of the Expedition 50 and 51 crew members.
After a four day chase, Dragon was captured and attached to the station using the Canadian arm on Feb 23 by the same two astronauts who released it on Sunday.
The research supplies and equipment brought up by Dragon will support over 250 scientific investigations to advance knowledge about the medical, psychological and biomedical challenges astronauts face during long-duration spaceflight.
SAGE III will measure stratospheric ozone, aerosols, and other trace gases by locking onto the sun or moon and scanning a thin profile of the atmosphere. It is one of NASA’s longest running earth science programs.
The LIS lightning mapper will measure the amount, rate and energy of lightning as it strikes around the world from the altitude of the ISS as it orbits Earth. Its data will complement that from the recently orbited GLM lighting mapper lofted to geosynchronous aboard the NASA/NOAA GOES-R spacecraft instrument.
NASA’s RAVEN experiment will test autonomous docking technologies for spacecraft.
SAGE III and RAVEN were stowed in the Dragon’s unpressurized truck. Astronauts plucked them out of the trunk using the robotic arm and attached them to specified locations on the stations exterior to carry out their objectives.
For the return trip to Earth, the astronaut crew loaded Dragon with more than 5,400 pounds of NASA cargo, and science and technology demonstration samples gathered and collected by the stations crewmembers.
“A variety of technological and biological studies are returning in Dragon. The Microgravity Expanded Stem Cells investigation had crew members observe cell growth and other characteristics in microgravity,” said NASA.
“This information will provide insight into how human cancers start and spread, which aids in the development of prevention and treatment plans. Results from this investigation could lead to the treatment of disease and injury in space, as well as provide a way to improve stem cell production for human therapy on Earth.”
“Samples from the Tissue Regeneration-Bone Defect study, a U.S. National Laboratory investigation sponsored by the Center for the Advancement of Science in Space (CASIS) and the U.S. Army Medical Research and Materiel Command, studied what prevents vertebrates such as rodents and humans from re-growing lost bone and tissue, and how microgravity conditions affect the process. Results will provide a new understanding of the biological reasons behind a human’s inability to grow a lost limb at the wound site, and could lead to new treatment options for the more than 30 percent of the patient population who do not respond to current options for chronic non-healing wounds.”
Dragon departed in order to make way for the arrival of the next cargo ship.
The ‘SS John Glenn’ Cygnus cargo freighter built by Orbital Sciences is due to lift off no earlier than March 27 on a United Launch Alliance (ULA) Atlas V rocket from Cape Canaveral Air Force Station.
The Orbital ATK Cygnus spacecraft named for Sen. John Glenn, one of NASA’s original seven astronauts, stands inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida behind a sign commemorating Glenn on March 9, 2017. Launch slated for March 21 on a ULA Atlas V. Credit: Ken Kremer/Kenkremer.com
Watch for Ken’s onsite launch and mission reports direct from the Kennedy Space Center and Cape Canaveral Air Force Station, Florida.
Stay tuned here for Ken’s continuing Earth and Planetary science and human spaceflight news.
NASA is beginning to integrate the results of its twin study on astronauts Mark and Scott Kelly. Image: NASA
People who plan and conduct space missions never tire of telling us how hard it is to do things in space.
Our next big goal is getting humans to Mars, and establishing a colony there. There are a multitude of technical and engineering hurdles to be overcome, but we think we can do it.
But the other side of the coin is the physiological hurdles to be overcome. Those may prove to be much more challenging to deal with. NASA’s twins study is poised to add an enormous amount of data to our growing body of knowledge on the effects of space travel on human beings.
NASA’s astronaut twins, Scott Kelly (l) and Mark Kelly (r). Image: NASA
Astronaut twins Scott and Mark Kelly are the basis of NASA’s study. Scott spent a year in space, returning to Earth on March 1st 2016, after spending 340 days aboard the ISS. Mark, himself a retired astronaut, remained on Earth during Scott’s year in space, providing a baseline for studying the effects on the human body of such a prolonged period of time away from Earth.
In February of 2016, NASA released preliminary results of the study. Now, the team studying the results of the twins study has started integrating the data. The way they’re doing this sets it apart from other studies.
“No one has ever looked this deeply at a human subject and profiled them in this detail.” – Tejaswini Mishra, Ph.D., Stanford University School of Medicine.
Typically, individual studies are released to appropriate journals more or less one at a time. But in the twins study, the data will be integrated and summarized before individual papers are published on separate themes. The idea is that taken together, their impact on our understanding of prolonged time in space will be much greater.
“The beauty of this study is when integrating rich data sets of physiological, neurobehavioral and molecular information, one can draw correlations and see patterns,” said Tejaswini Mishra, Ph.D., research fellow at Stanford University School of Medicine, who is creating the integrated database, recording results and looking for correlations. “No one has ever looked this deeply at a human subject and profiled them in this detail. Most researchers combine maybe two to three types of data but this study is one of the few that is collecting many different types of data and an unprecedented amount of information.”
“Each investigation within the study complements the other.” – Brinda Rana, Ph.D., U of C, San Diego School of Medicine
Mike Snyder, Ph.D, is the head of a team of people at Stanford that will work to synthesize the data. There are roughly three steps in the overall process:
Individual researchers in areas like cognition, biochemistry, and immunology will analyze and compile their data then share their results with the Stanford team.
The Stanford team will then further integrate those results into larger data sets.
Those larger data sets will then be reviewed and analyzed to confirm and modify the initial findings.
“There are a lot of firsts with this study and that makes it exciting,” said Brinda Rana, Ph.D., associate professor of psychiatry, University of California San Diego School of Medicine. “A comparative study with one twin in space and one on Earth has never been done before. Each investigation within the study complements the other.”
NASA compares the twins study, and the new integrated method of handling all the results, to conducting a symphony. Each study is like an instrument, and instead of each one playing a solo, they will be added into a greater whole. The team at Stanford is like the conductor. If you’ve ever listened to an orchestra, you know how powerful that can be.
“The human systems in the body are all intertwined which is why we should view the data in a holistic way,” said Scott M. Smith, Ph.D., NASA manager for nutritional biochemistry at the Johnson Space Center. He conducts biochemical profiles on astronauts and his research is targeted to specific metabolites, end products of various biological pathways and processes.
“It is a more comprehensive way to conduct research.” – Chris Mason, Ph.D., associate professor, Department of Physiology and Biophysics Weill Cornell Medicine
Chris Mason Ph.D., at Weill Cornell Medicine said, “Both the universe and the human body are complicated systems and we are studying something hard to see. It’s like having a new flashlight that illuminates the previously dark gears of molecular interactions. It is a more comprehensive way to conduct research.”
Scientists involved with the twins study are very clearly excited about this new approach. Having twin astronauts is an extraordinary opportunity, and will advance our understanding of spaceflight on human physiology enormously.
“There is no doubt, the learnings from integrating our data will be priceless,” said Emmanuel Mignot, M.D., Ph.D., director of Center for Sleep Science and Medicine, Stanford University School of Medicine. He studies the immune system and is enthusiastic to study specific immune cell populations because many of the other immune studies focus only on general factors.
A summary of the early results should be out by early 2018, or possible late 2017. Individual papers on more detailed themes will follow shortly.
An artist's illustration of a light-sail powered by a radio beam (red) generated on the surface of a planet. Could the part of the beam that misses the sail be our mysterious Fast Radio Bursts? Image Credit: M. Weiss/CfA
The extremely energetic events that we see out there in the Universe are usually caused by cataclysmic astrophysical events and activities of one sort or another. But what about Fast Radio Bursts? A pair of astrophysicists at Harvard say that the seldom seen phenomena could, maybe, possibly, be evidence of an advanced alien technology.
Fast radio bursts (FRBs) are short-lived radio pulses that last only a few milliseconds. It’s been assumed that they have some astrophysical cause. Fewer than 2 dozen of them have been detected since their discovery in 2007. They’re detected by our huge radio telescopes like the Arecibo Observatory in Puerto Rico, and the Parkes Observatory in Australia. They’re extremely energetic, and their source is a great distance from us.
The NSF’s Arecibo Observatory, which is located in Puerto Rico, is the world largest radio telescope. Arecibo detected 11 FRBs over the course of 2 months. Credit: NAIC
The two astrophysicists, Avi Loeb at the Harvard-Smithsonian Center for Astrophysics, and Manasvi Lingam at Harvard University, decided to investigate the possibility that FRBs have an alien technological origin.
“Fast radio bursts are exceedingly bright given their short duration and origin at great distances, and we haven’t identified a possible natural source with any confidence. An artificial origin is worth contemplating and checking.” – Avi Loeb, Harvard-Smithsonian Center for Astrophysics
I’ll Take ‘Alien Signals’ For $200 Alex
Loeb and Lingam began by calculating how much energy would be needed to send a signal that strong across such an enormous distance. They found that doing so with solar energy requires a solar array with an area twice the surface area of Earth. That would be enough energy, if the alien civilization was as close as we are to a star similar to our Sun.
Obviously, such a massive construction project is well beyond us. But however unlikely it sounds, it can’t be ruled out.
The pair also asked themselves questions about the viability of such a project. Would the heat and energy involved in such a solar array melt the structure itself? Their answer is that water-cooling would be sufficient to keep an array like this operating.
Their next question was, “Why build something like this in the first place?”
I’ll Take ‘Alien Spacecraft Propulsion Systems’ For $400 Alex”
The thinking behind their idea is based on an idea that we ourselves have had: Could we power a spacecraft by pushing on it with lasers? Or Microwaves? If we’ve thought of it, why wouldn’t other existing civilizations? If another civilization were doing it, what would the technology look like?
Their investigation shows that the engineering they’re talking about could power a spacecraft with a payload of a million tons. That would be about 20 times bigger than our largest cruise ship. According to Lingam, “That’s big enough to carry living passengers across interstellar or even intergalactic distances.”
If FRBs are indeed the result of an alien propulsion system, here’s how it would work: Earth is rotating and orbiting, which means the alien star and galaxy are moving relative to us. That’s why we would only see a brief flash. The beam sweeps across the sky and only hits us for a moment. The repeated appearance of the FRB could be a clue to its alien, technological origin.
The authors of the study outlining this thinking know that it’s speculative. But it’s their job to speculate within scientific constraints, which they have done. As they say in the conclusion of their paper, “Although the possibility that FRBs are produced by extragalactic civilizations is more speculative than an astrophysical origin, quantifying the requirements necessary for an artificial origin serves, at the very least, the important purpose of enabling astronomers to rule it out with future data.”
There are other interpretations when it comes to FRBs, of course. The others of another paper say that for at least one group of FRBs, known as FRB 121102, the source is likely astrophysical. According to them, FRBs likely come from “a young, highly magnetized, extragalactic neutron star.”
Lurking behind these papers are some intriguing questions that are also fun to ponder.
If the system required a solar array twice the size of Earth, where would the materials come from? If the system required water-cooling to avoid melting, where would all the water come from? It’s impossible to know, or to even begin speculating. But a civilization able to do something like this would have to be master engineers and resource exploiters. That goes without saying.
Why they might do it is another question. Probably the same reasons we would: curiosity and exploration, or maybe to escape a dying world.
An artist's illustration of the Thirty Meter Telescope at its preferred location at Mauna Kea, Hawaii. Image Courtesy TMT International Observatory
As Carl Sagan said, “Understanding is Ecstasy.” But in order to understand the Universe, we need better and better ways to observe it. And that means one thing: big, huge, enormous telescopes.
In this series, we’ll look at six Super Telescopes being built:
The Thirty Meter Telescope (TMT) is being built by an international group of countries and institutions, like a lot of Super Telescopes are. In fact, they’re proud of pointing out that the international consortium behind the TMT represents almost half of the world’s population; China, India, the USA, Japan, and Canada. The project needs that many partners to absorb the cost; an estimated $1.5 billion.
The heart of any of the world’s Super Telescopes is the primary mirror, and the TMT is no different. The primary mirror for the TMT is, obviously, 30 meters in diameter. It’s a segmented design consisting of 492 smaller mirrors, each one a 1.4 meter hexagon.
The light collecting capability of the TMT will be 10 times that of the Keck Telescope, and more than 144 times that of the Hubble Space Telescope.
But the TMT is more than just an enormous ‘light bucket.’ It also excels with other capabilities that define a super telescope’s effectiveness. One of those is what’s called diffraction-limited spatial resolution (DLSR).
An illustration of the segmented primary mirror of the Thirty Meter Telescope. Image Courtesy TMT International Observatory
When a telescope is pointed at distant objects that appear close together, the light from both can scatter enough to make the two objects appear as one. Diffraction-limited spatial resolution means that when a ‘scope is observing a star or other object, none of the light from that object is scattered by defects in the telescope. The TMT will more easily distinguish objects that are close to each other. When it comes to DLSR, the TMT will exceed the Keck by a factor of 3, and will exceed the Hubble by a factor of 10 at some wavelengths.
Crucial to the function of large, segmented mirrors like the TMT is active optics. By controlling the shape and position of each segment, active optics allows the primary mirror to compensate for changes in wind, temperature, or mechanical stress on the telescope. Without active optics, and its sister technology adaptive optics, which compensates for atmospheric disturbance, any telescope larger than about 8 meters would not function properly.
The TMT will operate in the near-ultraviolet, visible, and near-infrared wavelengths. It will be smaller than the European Extremely Large Telescope (E-ELT), which will have a 39 meter primary mirror. The E-ELT will operate in the optical and infrared wavelengths.
The world’s Super Telescopes are behemoths. Not just in the size of their mirrors, but in their mass. The TMT’s moving mass will be about 1,420 tonnes. Moving the TMT quickly is part of the design of the TMT, because it must respond quickly when something like a supernova is spotted. The detailed science case calls for the TMT to acquire a new target within 5 to 10 minutes.
This requires a complex computer system to coordinate the science instruments, the mirrors, the active optics, and the adaptive optics. This was one of the initial challenges of the TMT project. It will allow the TMT to respond to transient phenomena like supernovae when spotted by other telescopes like the Large Synoptic Survey Telescope.
The Science
The TMT will investigate most of the important questions in astronomy and cosmology today. Here’s an overview of major topics that the TMT will address:
The Nature of Dark Matter
The Physics of Extreme Objects like Neutron Stars
Early galaxies and Cosmic Reionization
Galaxy Formation
Super-Massive Black Holes
Exploration of the Milky Way and Nearby Galaxies
The Birth and Early Lives of Stars and Planets
Time Domain Science: Supernovae and Gamma Ray Bursts
Exo-planets
Our Solar System
This is a comprehensive list of topics, to be sure. It leaves very little out, and is a testament to the power and effectiveness of the TMT.
The raw power of the TMT is not in question. Once in operation it will advance our understanding of the Universe on multiple fronts. But the actual location of the TMT could still be in question.
The top of Mauna Kea is a prime site for telescopes, as shown in this image. Image Courtesy Mauna Kea Observatories
The dispute between some of the Hawaiian people and the TMT has been well-documented elsewhere, but the basic complaint about the TMT is that the top of Mauna Kea is sacred land, and they would like the TMT to be built elsewhere.
The organizations behind the TMT would still like it to be built at Mauna Kea, and a legal process is unfolding around the dispute. During that process, they identified several possible alternate sites for the telescope, including La Palma in the Canary Islands. Universe Today contacted TMT Observatory Scientist Christophe Dumas, PhD., about the possible relocation of the TMT to another site.
Dr. Dumas told us that “Mauna Kea remains the preferred location for the TMT because of its superb observing conditions, and because of the synergy with other TMT partner facilities already present on the mountain. Its very high elevation of almost 14,000 feet makes it the premier astronomical site in the northern hemisphere. The sky above Mauna Kea is very stable, which allows very sharp images to be obtained. It has also excellent transparency, low light pollution and stable cold temperatures that improves sensitivity for observations in the infrared.”
The preferred secondary site at La Palma is home to over 10 other telescopes, but would relocation to the Canary Islands affect the science done by the TMT? Dr. Dumas says that the Canary Islands site is excellent as well, with similar atmospheric characteristics to Mauna Kea, including stability, transparency, darkness, and fraction of clear-nights.
The Gran Telescopio Canarias (Great Canary Telescope) is the largest ‘scope currently at La Palma. At 10m diameter, it would be dwarfed by the TMT. Image: By Pachango – Own work, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=6880933
As Dr. Dumas explains, “La Palma is at a lower elevation site and on average warmer than Mauna Kea. These two factors will reduce TMT sensitivity at some wavelengths in the infrared region of the spectrum.”
Dr. Dumas told Universe Today that this reduced sensitivity in the infrared can be overcome somewhat by scheduling different observing tasks. “This specific issue can be partly mitigated by implementing an adaptive scheduling of TMT observations, to match the execution of the most demanding infrared programs with the best atmospheric conditions above La Palma.”
Court Proceedings End
On March 3rd, 44 days of court hearings into the TMT wrapped up. In that time, 71 people testified for and against the TMT being constructed on Mauna Kea. Those against the telescope say that the site is sacred land and shouldn’t have any more telescope construction on it. Those for the TMT spoke in favor of the science that the TMT will deliver to everyone, and the education opportunities it will provide to Hawaiians.
Though construction has been delayed, and people have gone to court to have the project stopped, it seems like the TMT will definitely be built—somewhere. The funding is in place, the design is finalized, and manufacturing of the components is underway. The delays mean that the TMT’s first light is still uncertain, but once we get there, the TMT will be another game-changer, just like the world’s other Super Telescopes.
An artist's illustration of the Large Synoptic Survey Telescope with a simulated night sky. The team hopes to use the LSST to further refine their search for hard-surface supermassive objects. Image: Todd Mason, Mason Productions Inc. / LSST Corporation
We humans have an insatiable hunger to understand the Universe. As Carl Sagan said, “Understanding is Ecstasy.” But to understand the Universe, we need better and better ways to observe it. And that means one thing: big, huge, enormous telescopes.
In this series we’ll look at 6 of the world’s Super Telescopes:
While the world’s other Super Telescopes rely on huge mirrors to do their work, the LSST is different. It’s a huge panoramic camera that will create an enormous moving image of the Universe. And its work will be guided by three words: wide, deep, and fast.
While other telescopes capture static images, the LSST will capture richly detailed images of the entire available night sky, over and over. This will allow astronomers to basically “watch” the movement of objects in the sky, night after night. And the imagery will be available to anyone.
The LSST is being built by a group of institutions in the US, and even got some money from Bill Gates. It will be situated atop Cerro Pachon, a peak in Northern Chile. The Gemini South and Southern Astrophysical Research Telescopes are also situated there.
The Camera Inside the ‘Scope
At the heart of the LSST is its enormous digital camera. It weighs over three tons, and the sensor is segmented in a similar way that other Super Telescopes have segmented mirrors. The LSST’s camera is made up of 189 segments, which together create a camera sensor about 2 ft. in diameter, behind a lens that is over 5 ft. in diameter.
Each image that the LSST captures is 40 times larger than the full moon, and will measure 3.2 gigapixels. The camera will capture one of these wide-field images every 20 seconds, all night long. Every few nights, the LSST will give us an image of the entire available night sky, and it will do that for 10 years.
“The LSST survey will open a movie-like window on objects that change brightness, or move, on timescales ranging from 10 seconds to 10 years.” – LSST: FROM SCIENCE DRIVERS TO REFERENCE DESIGN AND ANTICIPATED DATA PRODUCTS
The LSST will capture a vast, movie-like image of over 40 billion objects. This will range from distant, enormous galaxies all the way down to Potentially Hazardous Objects as small as 140 meters in diameter.
The primary-tertiay mirror at its construction facility. Image: LSST
There’s a whole other side to the LSST which is a little more challenging. We get the idea of an in-depth, moving, detailed image of the sky. That’s intuitively easy to engage with. But there’s another side, the data mining challenge.
The Data Challenge
The whole endeavour will create an enormous amount of data. Over 15 terabytes will have to be processed every night. Over its 10 year lifespan, it will capture 60 petabytes of data.
Once data is captured by the LSST, it will travel via two dedicated 40 GB lines to the Data Processing and Archive Center. That Center is a super-computing facility that will manage all the data and make it available to users. But when it comes to handling the data, that’s just the tip of the iceberg.
“LSST is a new way to observe, and gaining knowledge from the Big Data LSST delivers is indeed a challenge.” – Suzanne H. Jacoby, LSST
The sheer amount of data created by the LSST is a challenge that the team behind it saw coming. They knew they would have to build the capacity of the scientific community in advance, in order to get the most out of the LSST.
Handling all of the data from the LSST requires its own infrastructure. Image: LSST
As Suzanne Jacoby, from the LSST team, told Universe today, “To prepare the science community for LSST Operations, the LSST Corporation has undertaken an “Enabling Science” effort which funds the LSST Data Science Fellowship Program (DSFP). This two-year program is designed to supplement existing graduate school curriculum and explores topics including statistics, machine learning, information theory, and scalable programming.”
The Science
The Nature of Dark Matter and Understanding Dark Energy
Contributing to our understanding Dark Energy and Dark Matter is a goal of all of the Super Telescopes. The LSST will map several billion galaxies through time and space. It will help us understand how Dark Energy behaves over time, and how Dark Matter affects the development of cosmic structure.
Cataloging the Solar System
The raw imaging power of the LSST will be a game-changer for mapping and cataloguing our Solar System. It’s thought that the LSST could detect between 60-90% of all potentially hazardous asteroids (PHAs) larger than 140 meters in diameter, as far away as the main asteroid belt. This will not only contribute to NASA’s goal of identifying threats to Earth posed by asteroids, but will help us understand how planets formed and how our Solar System evolved.
Exploring the Changing Sky
The repeated imaging of the night sky, at great depth and with excellent image quality, should tell us a lot about supernovae, variable stars, and possible other events we haven’t even discovered yet. There are always surprising results whenever we build a new telescope or send a probe to a new destination. The LSST will probably be no different.
Milky Way Structure & Formation
The LSST will give us an unprecedented look at the Milky Way. It will survey over half of the sky, and will do so repeatedly. Hundreds of times, in fact. The end result will be an enormously detailed look at the motion of millions of stars in our galaxy.
Open Access
Perhaps the best part of the whole LSST project is that the all of the data will be available to everyone. Anyone with a computer and an internet connection will be able to access LSST’s movie of the Universe. It’s warm and fuzzy, to be sure, to have the results of large science endeavours like this available to anyone. But there’s more to it. The LSST team suspects that the majority of the discoveries resulting from its rich data will come from unaffiliated astronomers, students, and even amateurs.
It was designed from the ground up in this way, and there will be no delay or proprietary barriers when it comes to public data access. In fact, Google has signed on as a partner with LSST because of the desire for public access to the data. We’ve seen what Google has done with Google Earth and Google Sky. What will they come up with for Google LSST?
The Sloan Digital Sky Survey (SDSS), a kind of predecessor to the LSST, was modelled in the same way. All of its data was available to astronomers not affiliated with it, and out of over 6000 papers that refer to SDSS data, the large majority of them were published by astronomers not affiliated with SDSS.
First Light
We’ll have to wait a while for all of this to come our way, though. First light for the LSST won’t be until 2021, and it will begin its 10 year run in 2022. At that time, be ready for a whole new look at our Universe. The LSST will be a game-changer.
This artist’s rendering of the E-ELT is based on the detailed construction design for the telescope. Image: ESO/L. Calçada/ACe Consortium
We humans have an insatiable hunger to understand the Universe. As Carl Sagan said, “Understanding is Ecstasy.” But to understand the Universe, we need better and better ways to observe it. And that means one thing: big, huge, enormous telescopes.
In this series we’ll look at 6 of the world’s Super Telescopes:
The European Extremely Large Telescope (E-ELT) is an enormous ‘scope being built by the European Southern Observatory. It’s under construction right now in the high-altitude Atacama Desert of northern Chile. The ESO, with its partners, has built some of the largest and most technically advanced telescopes in the world, like the Atacama Large Millimeter Array (ALMA) and the Very Large Telescope (VLT.) But with a 39 meter primary mirror, the E-ELT will dwarf the other telescopes in the ESO’s fleet.
As Dr Michele Cirasuolo, Programme Scientist for the ELT told Universe Today, “The Extremely Large Telescope (ELT) is the flagship project of the European Southern Observatory (ESO), and when completed in 2024 will be the largest optical/infrared telescope in the world. It represents the next step forward and it will complement the research done with the GMT (Giant Magellan Telescope) and other large telescopes being built.”
This artist’s rendering of the E-ELT shows the 39 meter segmented mirror at the heart of the scope. ESO/L. Calçada/ACe Consortium
The E-ELT is the successor to the Overwhelmingly Large Telescope (OWL), which was the ESO backed away from due to its €1.5 billion price tag. Instead, the ESO focussed on the E-ELT. The site for the E-ELT was selected in 2010, and over the next couple years the design was finalized.
Like other telescopes—including the Keck Telescope—the E-ELT’s primary mirror will be made up of individually manufactured hexagonal segments; 798 of them. The primary mirror will be fitted with edge sensors to ensure that each segment of the mirror is corrected in relation to its neighbours as the scope is aimed or moved, or as it is disturbed by temperature changes, wind, or vibrations.
The E-ELT is actually a 5 mirror system. Along with the enormous primary mirror, and the secondary mirror, there are three other mirrors. An unusual aspect of the E-ELT’s design is its tertiary mirror. This tertiary mirror will give the E-ELT better image quality over a larger field of view than a primary and secondary mirror can.
The ‘scope also has two other mirrors which provide adaptive optics and image stabilization, as well as allowing more large science instruments to be mounted to the ‘scope simultaneously.
This diagram shows the novel 5-mirror optical system of ESO’s Extremely Large Telescope (ELT). Before reaching the science instruments the light is first reflected from the telescope’s giant concave 39-metre segmented primary mirror (M1), it then bounces off two further 4-metre-class mirrors, one convex (M2) and one concave (M3). The final two mirrors (M4 and M5) form a built-in adaptive optics system to allow extremely sharp images to be formed at the final focal plane. Image By ESO – https://www.eso.org/public/images/eso1704a/, CC BY 4.0, https://commons.wikimedia.org/w/index.php?curid=55268266
The Science: What Will the E-ELT Study?
The E-ELT is designed for an ambitious science agenda. One of the most exciting aspects of the E-ELT is its potential to capture images of extra-solar planets. The 39 meter mirror will not only collect more light from distant, faint objects, but will provide an increase in angular resolution. This means that the telescope will be capable of distinguishing objects that are close together.
As Dr. Cirasuolo explains, “This will allow the ELT to image exoplanets nearer to the star they are orbiting. We aim to probe planets in the so called habitable zone (where liquid water could exist on their surfaces) and take spectra to analyse the composition of their atmospheres.”
The E-ELT has other goals as well. It aims to probe the formation and evolution of planetary systems, and to detect water and organic molecules in protoplanetary disks around stars as they form. It will look at some of the most distant objects possible—the first stars, galaxies, and black holes—to try to understand the relationships between them.
The telescope is also designed to study the first galaxies, and to chart their evolution over time. As if this list of science goals isn’t impressive enough, the E-ELT holds out the hope of directly measuring the acceleration in the expansion of the Universe.
This video explains the design of the E-ELT and some of its science goals.
These are all fascinating goals, but for many of us the most compelling question we face is “Are We Alone?” Dr. Cirasuolo feels the same. As he told Universe Today, “The ultimate goal is finding signs of life. Certainly the next generation of telescopes will provide a huge leap forward in our understanding of extra solar planets and for the search for life in the Universe.”
The E-ELT won’t be working alone. Other Super Telescopes, like the Giant Magellan Telescope, the Thirty Meter Telescope, and even the Large Synoptic Survey Telescope, will all be working in conjunction to expand the frontier of knowledge.
It may be a very long time, if ever, before we find life somewhere else in the Universe. But by expanding our knowledge of exo-planets, the E-ELT is going to be a huge part of the ongoing effort. A few years ago, we weren’t even certain that we would find many planets around other stars. Now the discovery of exoplanets is almost commonplace. If the E-ELT lives up to its promise, then capturing actual images of exoplanets may become commonplace as well.
The 100 meter OWL telescope would have operated in the open air, and then been stored in its enclosure when not in use. Image: ESO Telescope Systems Division
We humans have an insatiable hunger to understand the Universe. As Carl Sagan said, “Understanding is Ecstasy.” But to understand the Universe, we need better and better ways to observe it. And that means one thing: big, huge, enormous telescopes.
In this series we’ll look at 6 of the world’s Super Telescopes:
The OWL (Overwhelmingly Large Telescope) was a gargantuan telescope proposed by the European Southern Observatory (ESO). The OWL was going to be a 100 meter monstrosity, which would dwarf anything in operation at the time. Sadly, OWL was eventually cancelled.
For now, anyway.
At the time that OWL was first proposed—in the late 1990’s—scientific studies showed that huge telescopes would be necessary to advance our knowledge. OWL promised to help us unlock the mystery of dark matter, peer back in time to witness the birth of the first stars and galaxies, and to directly image the atmospheres of exoplanets. It’s easy to see why people were excited by OWL.
This image simulates the increased resolving power of the OWL compared to its contemporaries. Image: ESO Telescope Systems Division
By 2005, the OWL study was completed and reviewed by a panel of experts. At that time, the concept was validated as a cost-effective way to build an Extremely Large Telescope (ELT). However, as the wheels kept turning, and a price tag of € 1.5 billion was attached to it, the ESO backed away.
OWL’s design called for a 100 meter diameter mirror, built out of 3264 segments. It would have had unequalled light-gathering capacity, and the ability to resolve details down to a milli-arc second. (A milli-arc second is approximately the size of a dime, placed on top of the Eiffel Tower, and viewed from New York City.) That’s extremely impressive to say the least. And OWL would have operated in both visible light and infrared.
Everything about OWL’s design was modular, in an effort to keep costs down. Image: ESO Telescope Systems Division
The problem with OWL was the cost, not the design feasibility. Engineers still think the design is feasible. In fact, the construction of the mirrors was pretty well-understood, and perhaps the most challenging part of the OWL was the adaptive optics required.
It’s a fact of large telescopes that they have to be constantly adjusted to produce sharp images. This requires adaptive optics. The adaptive optics required for OWL would have pushed the state-of-the-art technology at the time.
Adaptive optics is a method of overcoming the distortions that affect light as they pass through Earth’s atmosphere. For extremely sensitive telescopes like the OWL, the atmosphere of Earth is problematic. The photons coming from the distant reaches of the Universe can be garbled by the atmosphere as they approach the telescope. Telescopes are built on mountain-tops to reduce how much atmosphere photons have to travel through, but that’s not enough.
This video explains how adaptive optics work, and how they helped the Keck telescope make new discoveries.
OWL’s mirror segments would have to be aligned to within a fraction of the wavelength (0.0005 mm for visible light) in order for the telescope to deliver good images. OWL’s adaptive optics would have achieved this by adjusting each of OWL’s 3264 segments rapidly, sometimes several times per second.
OWL’s design called for modularity, or “serial, industrialized fabrication of identical building blocks” to reduce costs. The manufacture of extremely large telescopes is expensive, but so are the transportation costs. All of the components have to be built in engineering and manufacturing centres, then shipped to, and assembled on, fairly remote mountain tops. OWL’s components were designed to be shipped in standard shipping containers, which simplified that aspect of its construction.
This graphic shows the sizes of the world’s telescopes superimposed over the OWL. By Cmglee – Own workiThe source code of this SVG is valid., CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=33613161
In fact, OWL could have begun operation before all of its mirrors were in place, and would have grown in power as more mirror segments were built and integrated. (Other telescopes, like the Giant Magellan Telescope (GMT) will be in operation before all of the mirrors are installed.)
In the end, OWL’s cost became too great, and the project was cancelled. The ESO moved on to the 39.3 meter European Extremely Large Telescope. But all of the work done on the design of OWL was not lost.
This artist’s impression shows the European Extremely Large Telescope (E-ELT) in its enclosure. The E-ELT will be a 39-metre aperture optical and infrared telescope sited on Cerro Armazones in the Chilean Atacama Desert, 20 kilometres from ESO’s Very Large Telescope on Cerro Paranal, which is visible in the distance towards the left. The design for the E-ELT shown here is preliminary. ESO/L. Calçada
Everything that we learn about telescope design trickles down to our next-generation of telescopes. That’s true whether designs like OWL get built or not. We’ll just keep building on our success, and keep building larger and more powerful telescopes.
The adaptive optics that OWL required were a challenge. But huge advances have been made on that front. And in the way of things, the manufacturing costs have likely come down as well.
OWL itself may never be built, but other ‘scopes are on the way. Telescopes like the James Webb Space Telescope, the Giant Magellan Telescope, and the European Extremely Large Telescope hold the same promise that OWL did.
And in the end, the contributions of those and other ‘scopes might surpass those promised by OWL.
The Giant Magellan Telescope is under construction in Chile and should see first light sometime in the early 2020s. Image: Giant Magellan Telescope – GMTO Corporation
We humans have an insatiable hunger to understand the Universe. As Carl Sagan said, “Understanding is Ecstasy.” But to understand the Universe, we need better and better ways to observe it. And that means one thing: big, huge, enormous telescopes.
In this series we’ll look at 6 of the world’s Super Telescopes:
The Giant Magellan Telescope (GMT) is being built in Chile, at the Las Campanas Observatory, home of the GMT’s predecessors the Magellan Telescopes. The Atacama region of Chile is an excellent location for telescopes because of its superb seeing conditions. It’s a high-altitude desert, so it’s extremely dry and cool there, with little light pollution.
The GMT is being built by the USA, Australia, South Korea, and Brazil. It started facility construction in 2015, and first light should be in the early 2020’s.
The heart of the Giant Magellan Telescope is the segmented primary mirror. Image: Giant Magellan Telescope – GMTO Corporation
Segmented mirrors are the peak of technology when it comes to super telescopes, and the GMT is built around this technology.
The GMT’s primary mirror consists of 7 separate mirrors: one central mirror surrounded by 6 other mirrors. Together they form an optical surface that is 24.5 meters (80 ft.) in diameter. That means the GMT will have a total light collecting area of 368 square meters, or almost 4,000 square feet. The GMT will outperform the Hubble Space Telescope by having a resolving power 10 times greater.
There’s a limit to the size of single mirrors that can be built, and the 8.4 meter mirrors in the GMT are at the limits of construction methods. That’s why segmented systems are in use in the GMT, and in other super telescopes being designed and built around the world.
These mirrors are modern feats of engineering. Each one is made of 20 tons of glass, and takes years to build. The first mirror was cast in 2005, and was still being polished 6 years later. In fact, the mirrors are so massive, that they need 6 months to cool when they come out of casting.
They aren’t just flat, simple mirrors. They’re described as potato chips, rather than being flat. They’re aspheric, meaning the mirrors’ faces have steeply curved surfaces. The mirror’s have to have exactly the same curvature in order to perform together, which requires leading-edge manufacturing. The mirrors’ paraboloidal shape has to be polished to an accuracy greater than 25 nanometers. That’s about 1/25th the wavelength of light itself!
In fact, if you took one of the GMT’s mirrors and spread it out from the east coast to the west coast of the USA, the height of the tallest mountain on the mirror would be only 1/2 of one inch.
The plan is for the Giant Magellan Telescope to begin operation with only four of its mirrors. The GMT will also have an extra mirror built, just for contingencies.
The construction of the GMT’s mirrors required entirely new testing methods and equipment to achieve these demanding accuracies. The entire task fell on the University of Arizona’s Richard F. Caris Mirror Lab.
But GMT is more than just its primary mirror. It also has a secondary mirror, which is also segmented. Each one of the secondary mirror’s segments must work in concert with its matching segment on the primary mirror, and the distance from secondary mirror to primary mirror has to be measured within one part in 500 million. That requires exacting engineering for the steel structure of the body of the telescope.
The engineering behind the GMT is extremely demanding, but once it’s in operation, what will it help us learn about the Universe?
“I think the really exciting things will be things that we haven’t yet though of.” -Dr. Robert Kirshner
The GMT will help us tackle multiple mysteries in the Universe, as Dr. Robert Kirshner, of the Harvard-Smithsonian Center for Astrophysics, explains in this video.
The scientific aims of the GMT are well laid out, and there aren’t really any surprises. The goals of the GMT are to increase our understanding of some fundamental aspects of our Universe:
Star, planet, and disk formation
Extrasolar planetary systems
Stellar populations and chemical evolution
Galaxy assembly and evolution
Fundamental physics
First light and reionization
The GMT will collect more light than any other telescope we have, which is why its development is so keenly followed. It will be the first ‘scope to directly image extrasolar planets, which will be enormously exciting. With the GMT, we may be able to see the color of planets, and maybe even weather systems.
We’re accustomed to seeing images of Jupiter’s storm bands, and weather phenomena on other planets in our Solar System, but to be able to see something like that on extra-solar planets will be astounding. That’s something that even the casual space-interested person will immediately be fascinated by. It’s like science fiction come to life.
Of course, we’re still a ways away from any of that happening. With first light not anticipated until the early 2020’s, we’ll have to be very patient.
