Rough Red Planet Rocks Rip Rover Curiosity Wheels

Photomosaic shows new holes and tears in several of rover Curiosity’s six wheels caused by recent driving over sharp edged Martian rocks on the months long trek to Mount Sharp. Raw images taken by the MAHLI camera on Curiosity’s arm on Dec. 22, 2013 (Sol 490) were assembled to show some recent damage to several of its six wheels – most noticeably the two here in middle and front. Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com See below complete 6 wheel mosaic and further wheel mosaics for comparison

Photomosaic shows new holes and tears in several of rover Curiosity’s six wheels caused by recent driving over sharp edged Martian rocks on the months long trek to Mount Sharp. Raw images taken by the MAHLI camera on Curiosity’s arm on Dec. 22, 2013 (Sol 490) were assembled to show some recent damage to several of its six wheels – most noticeably the two here in middle and front. Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com
See below complete 6 wheel mosaic and further wheel mosaics for comparison
[/caption]

Rough edged rocks on the Red Planet are clearly taking their toll on rover Curiosity’s hi tech wheels as she speeds towards her ultimate goal – humongous Mount Sharp – in search of the ingredients necessary to sustain potential Martian microbes.

Several of the NASA rovers six big aluminum wheels have suffered some significant sized rips, tears and holes up to several centimeters wide – in addition to numerous dents – as she has picked up the driving pace across the rugged, rock filled Martian terrain this past fall and put over 4.5 kilometers (3 mi.) on the odometer to date.

It’s rather easy to spot the wheel damage to the 1 ton behemoth by examining the mosaic imagery we have created – See above and below – from newly transmitted raw imagery and comparing that to older imagery taken at earlier points in the mission. Check our Sol 177 wheels mosaic below.

The latest imagery from Mars captured just prior to Christmas is delivering an undesired holiday present of sorts to team members that might well cause the scientists and engineers to alter Curiosity’s extraterrestrial road trip to traverse smoother terrain and thereby minimize future harm.

So the wheel damage is certainly manageable at this point but will require attention.

The team of Marco Di Lorenzo and Ken Kremer have assembled the new Mastcam and MAHLI raw images of the wheels captured on Sol 490 (Dec. 22) into fresh color mosaics – shown herein.

Photomosaic shows new holes and tears in several of rover Curiosity’s six wheels caused by recent driving over sharp edged Martian rocks on the months long trek to Mount Sharp. Raw images taken by the MAHLI camera on Curiosity’s arm on Dec. 22, 2013 (Sol 490) were assembled to show rover’s underbelly and some recent damage to several of its six wheels - most noticeably the two at right in middle and front. Far fewer holes are visible in imagery  captured earlier in the Curiosity’s Martian traverse - see below. Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com   See below more wheel mosaics for comparison
Photomosaic shows new holes and tears in several of rover Curiosity’s six wheels caused by recent driving over sharp edged Martian rocks on the months long trek to Mount Sharp. Raw images taken by the MAHLI camera on Curiosity’s arm on Dec. 22, 2013 (Sol 490) were assembled to show some recent damage to several of its six wheels – most noticeably the two at right in middle and front. Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com
See below more wheel mosaics for comparison
Photomosaic from Sol 177 (Feb. 3, 2013) shows rover Curiosity’s six wheels relatively intact with far fewer holes and dents compared to Sol 490 mosaic taken on Dec 22. 2013.  Rover is working in Yellowknife Bay here and had not yet begun long trek to Mount Sharp. Sol 177 raw images assembled to mosaic were taken by the MAHLI camera on Curiosity’s arm.  Credit: NASA/JPL/MSSS/Marco Di Lorenzo/Ken Kremer- kenkremer.com
Photomosaic from Sol 177 (Feb. 3, 2013) shows rover Curiosity’s six wheels relatively intact with far fewer holes and dents compared to Sol 490 mosaic taken on Dec 22. 2013. Rover is working in Yellowknife Bay here and had not yet begun long trek to Mount Sharp. Sol 177 raw images assembled to mosaic were taken by the MAHLI camera on Curiosity’s arm. Credit: NASA/JPL/MSSS/Marco Di Lorenzo/Ken Kremer- kenkremer.com

Indeed the rovers handlers have already directed the SUV sized Curiosity to snap close up images of the 20 inch diameter wheels with the high resolution color cameras located on the Mast as well as the Mars Hand Lens Imager (MAHLI) camera at the end of the rover’s maneuverable robotic arm.

“We want to take a full inventory of the condition of the wheels,” said Jim Erickson of NASA’s Jet Propulsion Laboratory, project manager for the NASA Mars Science Laboratory Project, in a NASA statement.

Up close view of hole in one of rover Curiosity’s six wheels caused by recent driving over rough Martian rocks. Mosaic assembled from Mastcam raw images taken on Dec. 22, 2013 (Sol 490) Credit: NASA/JPL/MSSS/Ken Kremer -kenkremer.com/Marco Di Lorenzo
Up close view of hole in one of rover Curiosity’s six wheels caused by recent driving over rough Martian rocks. Mosaic assembled from Mastcam raw images taken on Dec. 22, 2013 (Sol 490) Credit: NASA/JPL/MSSS/Ken Kremer -kenkremer.com/Marco Di Lorenzo

The rover team certainly expected some wear and tear to accumulate along the rock strewn path to the base of Mount Sharp – which reaches 5.5 km (3.4 mi) into the Martian sky.

But the volume of sharp edged rocks encountered in the momentous trek across the floor of Curiosity’s Gale Crater landing site apparently has picked up- as evidenced by the new pictures – and consequently caused more damage than the engineers anticipated.

“Dents and holes were anticipated, but the amount of wear appears to have accelerated in the past month or so,” Erickson noted.

“It appears to be correlated with driving over rougher terrain. The wheels can sustain significant damage without impairing the rover’s ability to drive. However, we would like to understand the impact that this terrain type has on the wheels, to help with planning future drives.”

The team is now inspecting the new imagery acquired of the wheels and will decide if a course alteration to Mount Sharp is in order.

The left front wheel may have suffered the most harm.

Up close view shows a tear in one of rover Curiosity’s six wheels caused by recent driving over rough Martian rocks. Mosaic assembled from Mastcam raw images taken on Dec. 22, 2013 (Sol 490) Credit: NASA/JPL/MSSS/Ken Kremer -kenkremer.com/Marco Di Lorenzo
Up close view shows a tear in one of rover Curiosity’s six wheels caused by recent driving over rough Martian rocks. Mosaic assembled from Mastcam raw images taken on Dec. 22, 2013 (Sol 490) Credit: NASA/JPL/MSSS/Ken Kremer -kenkremer.com/Marco Di Lorenzo

“Routes to future destinations for the mission may be charted to lessen the amount of travel over such rough terrain, compared to smoother ground nearby,” says NASA.

Following a new, post Christmas drive today, Dec. 26, 2013 (Sol 494) Curiosity’s odometer stands at 4.6 kilometers.

Curiosity has already accomplished her primary goal of discovering a habitable zone on Mars that could support Martian microbes if they ever existed.

NASA’s rover Curiosity uncovered evidence that an ancient Martian lake had the right chemical ingredients that could have sustained microbial life forms for long periods of time – and that these habitable conditions persisted on the Red Planet until a more recent epoch than previously thought.

Right now the researchers are guiding Curiosity along a 10 km (6 mi) path to the lower reaches of Mount Sharp – which they hope to reach sometime in mid 2014.

NASA's Mars rover Curiosity took this self-portrait, composed of more than 50 images using its robotic arm-mounted MAHLI camera, on Feb. 3. The image shows Curiosity at the John Klein drill site. A drill hole is visible at bottom left.  Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com
NASA’s Mars rover Curiosity took this self-portrait, composed of more than 50 images using its robotic arm-mounted MAHLI camera, on Feb. 3. The image shows Curiosity at the John Klein drill site. A drill hole is visible at bottom left. Credit: NASA / JPL / MSSS / Marco Di Lorenzo / Ken Kremer- kenkremer.com

Stay tuned here for Ken’s continuing Curiosity, Chang’e-3, LADEE, MAVEN, Mars rover and MOM news.

Ken Kremer

Astronauts Brave Brief Ammonia Snowstorm As They Conclude Fix To Space Station

NASA astronaut Mike Hopkins holds a spare ammonia pump module during a spacewalk Dec. 24, 2013. Hopkins and fellow Expedition 38 Rick Mastracchio (top) performed two spacewalks to replace a pump blamed for crippling one of the International Space Station's two cooling loops Dec. 11. Credit: NASA TV (screenshot)

Toxic snowflakes in space were just one obstacle astronauts faced down today (Dec. 24) as they successfully replaced an ammonia pump that will, if all goes to plan, put the space station back in full service in a few hours.

“They’re just completely surrounding us now,” radioed NASA astronaut Rick Mastracchio of the ammonia flakes as the astronauts clipped four fluid lines into place on to the spare pump. NASA said the ammonia was just residual fluid and not indicative of a leak. “Some little ones, some big ones,” he added.

Within a few minutes, however, the ammonia dissipated. Some flakes did strike the spacesuits of Mastracchio and fellow NASA spacewalker Mike Hopkins, causing NASA to do a modified decontamination procedure where the astronauts stayed in a vacuum for a few extra minutes inside the airlock. (The sun’s heat bakes off ammonia over time, and the crew was outside long enough for most ammonia to dissipate, NASA said.)

The spacewalk completed with no further drama at 7 hours and 30 minutes, earning high praise for the participating astronauts from Mission Control in Houston.

“It’s the best Christmas ever,” radioed CapCom and NASA astronaut Doug Wheelock from the ground as the spacewalkers entered the International Space Station’s Quest airlock at the end of the repair job. “We got it,” Mastracchio responded.

NASA astronaut Doug Wheelock (left) and Japanese astronaut Aki Hoshide served as CapComs during two tricky ammonia pump replacements in December 2013. Wheelock assisted Expedition 38 spacewalking astronauts Mike Hopkins and Rick Mastracchio, while Hoshide helped Japanese astronaut Koichi Wakata with robotic maneuvers. Credit: NASA TV (screenshot)
NASA astronaut Doug Wheelock (left) and Japanese astronaut Aki Hoshide served as CapComs during two tricky ammonia pump replacements in December 2013. Wheelock assisted Expedition 38 spacewalking astronauts Mike Hopkins and Rick Mastracchio, while Hoshide helped Japanese astronaut Koichi Wakata with robotic maneuvers. Credit: NASA TV (screenshot)

Preliminary tests show the spare pump is working perfectly. The pump is a welcome present for the six-person Expedition 38 crew, which saw a reduction in science and backup systems for two weeks after a valve in the last pump failed, causing one of the station’s two cooling loops to shut down automatically. The loops are needed to regulate the temperatures of electronics and systems on station.

The Expedition 38 crew was so quick with the repair that they finished the job in two spacewalks instead of the planned three. The astronauts fell behind the timeline today as they struggled with some of the fluid connections to the new pump, but the final steps — putting the electrical connections in place — took just minutes. The pump was brought from another location on station today, and installed into its permanent spot to help ammonia flow through the cooling system.

Anywhere between hundreds and thousands of people at NASA and international partners scrambled to put spacewalks together to fix the cooling problem after it happened. Wheelock, himself a veteran of a tricky ammonia pump repair in 2010, communicated with the spacewalkers. Japanese astronaut Aki Hoshide filled the other CapCom slot, helping Japanese astronaut Koichi Wakata who handled robotics in orbit.

Japanese astronaut Koichi Wakata controlled Canadarm2 during two spacewalks to replace a faulty ammonia pump in December 2013. Credit: NASA TV (screenshot)
Japanese astronaut Koichi Wakata controlled Canadarm2 during two spacewalks to replace a faulty ammonia pump in December 2013. Credit: NASA TV (screenshot)

Mastracchio marked his eighth spacewalk with today’s repair while Hopkins, who rode Canadarm2 for the first time in a last-minute decision, was on his second. As with a spacewalk on Saturday (Dec. 21), the astronauts reported no helmet water leaks — comforting words for agency officials who put in new procedures and parts after an incident in July. (Mastracchio experienced a water problem during repressurization Saturday that was unrelated to the first incident, and wore a backup suit today to let the primary one dry out.)

Should the ammonia pump work as planned, this clears the way for the Russians to do a spacewalk Dec. 27 to install the Urthecast high-resolution camera that will beam live views of Earth, among other tasks. Expedition 38 has the day off tomorrow (Dec. 25), NASA TV added.

The only other Christmas Eve spacewalk in NASA history took place Dec. 24, 1999 during Hubble Space Telescope servicing mission STS-103. Another Christmas Eve milestone for NASA took place 45 years ago today, when the Apollo 8 crew made a now-famous broadcast while orbiting above the moon.

Yutu Moon Rover Sets Sail for Breathtaking New Adventures

China’s 1st Moon rover ‘Yutu’ embarks on thrilling adventure marking humanity’s first lunar surface visit in nearly four decades. Yutu portrait taken by the Chang’e-3 lander. Credit: CNSA/CCTV

China’s 1st Moon rover ‘Yutu’ embarks on thrilling adventure marking humanity’s first lunar surface visit in nearly four decades. Yutu portrait taken by the Chang’e-3 lander. Credit: CNSA/CCTV
See below Yutu’s departing portrait of Chang’e-3 lander emblazoned with Chinese national flag
Story updated[/caption]

China’s now famous ‘Yutu’ moon rover has set sail for what promises to be breathtaking new adventures on Earth’s nearest neighbor, after completing a final joint portrait session with the Chang’e-3 lander that safely deposited her on the lunar surface only a week ago.

Yutu’s upcoming journey marks humanity’s first lunar surface visit in nearly four decades since the Soviet Union’s Luna 24 sample return vehicle visited. America’s last lunar landing mission with the Apollo 17 astronauts departed 41 years ago on Dec. 14, 1972.

The Chang’e-3 mothership and Yutu rover have resumed full operations after awakening from a sort of self induced slumber following commands from Mission Control back in Beijing.

The lander and rover finished up their 5th and final dual picture taking session – in living lunar color – on Sunday, Dec. 22, according to CCTV, China’s state run broadcast network.

“Ten pictures have been taken at five spots so far, and all of them are better than we expected,” said Wu Weiren, chief designer of the China Lunar Probe Program, to CCTV.

See the newly released portraits from photo session 5 – above and below.

The rover and lander have taken photos of each other for the fifth and final time. The back side of Chang'e 3 lander as seen by rover Yutu with Chinese national flag at left imaged for the first time.  Credit: CNSA/CCTV
The rover and lander have taken photos of each other for the fifth and final time. The back side of Chang’e 3 lander as seen by rover Yutu with Chinese national flag at left imaged for the first time.
Credit: CNSA/CCTV

After arriving on the moon, Yutu and the lander took an initial pair of portraits of one another. Read my earlier report – here.

Yutu was then directed to travel in a semicircular path around the lander and to the south, making tracks several centimeters deep into the loose lunar regolith.

But within two days of the historic Dec. 14 touchdown, the two spacecraft took a four-day break that lasted from Dec. 16 to Dec. 20, during which China’s space engineers shut down their subsystems, according to China’s State Administration of Science, Technology and Industry for National Defense (SASTIND).

Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer See the complete panorama below   Story updated
Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer See the complete panorama below

The vehicles took a ‘nap” to deal with direct solar radiation that significantly raised their temperatures. Yutu’s sunny side exceeded 100 degrees centigrade while the shaded side was simultaneously below zero, reported SASTIND.

“The break had been planned to last until Dec. 23, but the scientists decided to restart Yutu now for more research time, based on the recent observations and telemetry parameters,” said Pei Zhaoyu, spokesman for the Chinese lunar program, according to China’s Xinhua state news agency.

Both robots then snapped additional photos of one another during the traverse from each of five specific and preplanned locations.

See accompanying traverse map below – written in Chinese.

Path of Yutu rover from Dec. 14 landing to Dec. 21. Landscape textured with Chang'e 3 imagery from space and ground.  Credit: CNSA/BACC
Path of Yutu rover from Dec. 14 landing to Dec. 21. Landscape textured with Chang’e 3 imagery from space and ground. Credit: CNSA/BACC

These images taken by Yutu were designed to show the 1200 kg Chang’e-3 lander from the front, side and back sides as it drove around the right side – for better illumination – at a distance of about 10 meters.

The final image of the Chang’e-3 lander taken by Yutu also captured China’s national flag emblazoned on the lander for the first time, since this was the first time it was in view of the rover’s camera eyes.

See the accompanying traverse graphic here – written in Chinese.

Yutu and the Chang'e 3 lander are scheduled to take photos of each other soon from locations outlined in this artists concept.  Credit: China Space
Yutu and the Chang’e 3 lander were scheduled to take photos of each other from locations outlined in this artists concept. Credit: China Space

Having fulfilled the last of their joint tasks, the two spacecraft can therefore each begin their own lunar exploration missions, working independently of one another exactly as planned from the outset of China’s inaugural moon landing feat.

Yutu will depart the Chang’e-3 landing zone forever and begin its own lunar trek that’s expected to last at least 3 months – and perhaps longer if it’s delicate electronic components survive the moon’s utterly harsh and unforgiving space environment.

“They will begin to conduct scientific explorations of the geography and geomorphology of the landing spot and nearby areas, and materials like minerals and elements there. We will also explore areas 30 meters and 100 meters beneath the lunar soil. The exploration will continue longer than we planned, because all the instruments and equipments are working very well,” noted Wu Weiren.

The robotic pair of spacecraft safely soft landed on the Moon on Dec. 14 at Mare Imbrium, nearby the Bay of Rainbows, or Sinus Iridum region.

Barely seven hours after the history making touchdown, ‘Yutu’ was painstakingly lowered from its perch atop the lander and then successfully drove all six wheels onto the moon’s surface on Dec. 15.

The Chang’e-3 mothership captured a panoramic view of the stark lunar terrain surrounding the spacecraft after ‘Yutu’ drove some 9 meters away from the lander.

See the eerie panoramic view of the landing site showing Yutu’s first moments on the alien lunar surface in my prior story – here.

See the dramatic video with an astronauts eye view of the lunar descent and touchdown in my prior story – here.

1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer
1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer

The 120 kg Yutu rover is almost the size of a golf cart. It measures about 1.5 m x 1 m on its sides and stands about 1.5 m (nearly 5 feet) tall – virtually human height.

Yutu, which translates as ‘Jade Rabbit’ will use its suite of four science instruments to survey the moon’s geological structure and composition to locate the moon’s natural resources for use by potential future Chinese astronauts, perhaps a decade from now.

Stay tuned here for Ken’s continuing Chang’e-3, LADEE, MAVEN, MOM, Mars rover and more news.

Ken KremerLanding site of Chinese lunar probe Chang'e-3 on Dec. 14, 2013. Landing site of Chinese lunar probe Chang’e-3 on Dec. 14, 2013. [/caption]

Can Astronauts Fix The Space Station In Two Spacewalks? Watch Live Tuesday To Find Out

NASA astronaut Mike Hopkins during his first spacewalk on Dec. 21, 2013 during Expedition 38. He tweeted the next day: "Wow . . . can't believe that is me yesterday. Wish I could find the words to describe the experience, truly amazing." Credit: NASA

Two astronauts are oh-so-close to fixing the International Space Station cooling system that shut down Dec. 11. NASA astronauts Mike Hopkins and Rick Mastracchio will head “outside” on a spacewalk around 7:10 a.m. EST (12:10 p.m. UTC) to replace a faulty pump that led to the problem.

The spacewalkers were so quick on their first outing (on Saturday, Dec. 21) that they accomplished many of the tasks planned for their second spacewalk. They unhooked the first pump module and stowed it safely, then elected to wait until their second to retrieve the replacement pump, swap it in and turn it on.

Below the jump, here are some things to watch for — including why Hopkins is getting a ride on the Canadarm2 robotic arm this time instead of Mastracchio.

The suits. NASA has new safety procedures and measures in place to protect against helmet water leaks, and everything worked perfectly the first time. In an unrelated incident, while the astronauts were in the airlock, an inadvertent switch-throw introduced some water into Mastracchio’s sublimator. The suit is airing out and Mastracchio is wearing a backup suit. While sublimators need water to function, this water could have ended up in the wrong spot. If he had used the one with the water in it, it could have frozen during the second spacewalk and caused problems, Judd Frieling, the Expedition 38 lead flight director, explained on NASA TV Monday.

The background personnel. While it’s easy to shine the spotlight on the two guys outside, also remember that Japanese astronaut Koichi Wakata will be piloting the robotic arm under direction from CapCom and fellow Japanese astronaut Aki Hoshide. Giving advice to the spacewalkers will be CapCom and NASA astronaut Doug Wheelock, who did a similar repair on the International Space Station in 2010. As Wheelock told Universe Today, there are literally hundreds (likely, thousands) of people working the procedures to get this done.

The timeline. NASA really, really wants to wrap this repair up soon, and it’s not because of the holidays. Dec. 27 marks a planned spacewalk for the Russian side of the station that is totally unrelated to what is going on right now. The Americans are hoping they won’t disrupt the schedule so that the Russians can proceed with their experiment swapouts and foot restraint installation as originally planned.

Image above: Expedition 24 Flight Engineers Doug Wheelock (right) and Tracy Caldwell Dyson work to replace a failed ammonia pump module outside of the International Space Station. Credit: NASA TV
Image above: Expedition 24 Flight Engineers Doug Wheelock (right) and Tracy Caldwell Dyson work to replace a failed ammonia pump module outside of the International Space Station. Credit: NASA TV

The robotic arm. Hopkins is a much more junior spacewalker than the experienced Mastracchio, who has seven spacewalks underneath his belt before today. Hopkins, who is on his first spaceflight, is in a situation where he can expect more flights in the future. So any training he can get in orbit would be fantastic as he would be a stronger asset on future missions. So, Mastracchio was supposed to ride the Canadarm2 on the second spacewalk, but at that time NASA anticipated it would take three to do the repair. Since the crew finished the work so swiftly, it’s likely only two will be needed. As such, giving Hopkins the slot would be the best practice, NASA and the crew determined.

The future pump move. NASA decided not to move the faulty pump from its temporary stowage location until later. Due to thermal conditions on station, it can stay in its temporary spot until June. This saves the spacewalkers extra work now, but someone will need to head outside by summer to move it to a more permanent location.

We’ll let you know how the spacewalk went.

New Video Celebrates Saturn And The Day The Earth Smiled

The full mosaic from the Cassini imaging team of Saturn on July 19, 2013... the "Day the Earth Smiled"

Just to demonstrate how far-reaching that Saturn snapshot of Earth this year was, the Skopje Astronomical Society (from Macedonia) made a video celebrating “The Day The Earth Smiled”, when the Cassini spacecraft looked at Earth on July 19 and thousands of people made pictures and video showing what they were doing at that time.

Watch the video, then look at some stunning pictures of Saturn below the jump.

Saturn and its rings, as seen from above the planet by the Cassini spacecraft. Credit: NASA/JPL/Space Science Institute. Assembled by Gordan Ugarkovic.
Saturn and its rings, as seen from above the planet by the Cassini spacecraft. Credit: NASA/JPL/Space Science Institute. Assembled by Gordan Ugarkovic.

 

Mosaic of Saturn seen in eclipse in September 2006. Earth is the bright dot just inside the F ring at upper left. (CICLOPS/NASA/JPL-Caltech/SSI)
Mosaic of Saturn seen in eclipse in September 2006. Earth is the bright dot just inside the F ring at upper left. (CICLOPS/NASA/JPL-Caltech/SSI)
A false-color view of Saturn's storm, as seen through Cassini's wide-angle camera. The blue bands at the edge are Saturn's rings. Credit: NASA/JPL-Caltech/SSI
A false-color view of Saturn’s storm, as seen through Cassini’s wide-angle camera. The blue bands at the edge are Saturn’s rings. Credit: NASA/JPL-Caltech/SSI
Saturn, its rings and three moons are visible in this image from Cassini. Credit: NASA/ESA
Saturn, its rings and three moons are visible in this image from Cassini. Credit: NASA/ESA

 

A white storm in Saturn's northern hemisphere, as seen on Dec. 14, 2010. Credit: Anthony Wesley
A white storm in Saturn’s northern hemisphere, as seen on Dec. 14, 2010. Credit: Anthony Wesley

Groovy! Martian Moon Shows Off Its Weird Stripes In New Video

The streaked and stained surface of Phobos. (Image: NASA)

After seeing Phobos imaged from the surface of the Red Planet by Mars Curiosity, now we’re lucky to get a close-up treat: here’s a video showing Mars Express images of the Martian moon over the last 10 years. The images reveal mysterious grooves running through the small moon, which is 13.5-miles (22 kilometers) in diameter, and scientists still aren’t sure what’s going on.

“The moon’s parallel sets of grooves are perhaps the most striking feature, along with the giant 9 km-wide Stickney impact crater that dominates one face,” the European Space Agency wrote.

“The origin of the moon’s grooves is a subject of much debate. One idea assumes that the crater chains are associated with impact events on the moon itself. Another idea suggests they result from Phobos moving through streams of debris thrown up from impacts 6000 km away on the surface of Mars, with each ‘family’ of grooves corresponding to a different impact event.”

For more about amazing discoveries from Mars Express, check out our top 10 list from the summer!

Cue The Aww: Astronaut Puts 3-Year-Old Son’s Drawing On A Quilt Piece

NASA astronaut Karen Nyberg created this mini-quilt based on a drawing her son, Jack, created. Picture posted in December 2013. Credit: Karen Nyberg/Pinterest

Kids’ drawings are the best, as astronaut Karen Nyberg proudly shows in her latest mini-quilt piece. The astronaut — who just spent six months in orbit during Expedition 36/37 — is also a prolific quilter and drew inspiration from her son, three-year-old Jack, in this quilt posted on Pinterest. The drawing shows how quickly Jack changed during her mission, she wrote.

“When I left for space station in May, my son was drawing only lines, circles, and squiggles. When I returned in November, he was drawing people. He told me this picture is ‘Jack playing in the grass on a sunny day.’ ”

We’re guessing Nyberg is having an easier time quilting now that she isn’t working in microgravity anymore. The video below explains the challenges she had doing quilting in orbit and making sure that sharp pins didn’t just float away and cause problems on station.

Nyberg is married to astronaut Doug Hurley (who piloted the final shuttle mission, among other things) and as the Houston Chronicle’s Eric Berger points out in November, the parents have lots of experience helping each other out with child care during training and missions.

China’s 1st Lunar Lander snaps 1st landing site Panorama

Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer See the complete panorama below Story updated

Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer
See the complete panorama below
Story updated[/caption]

China’s inaugural Chang’e-3 lunar lander has snapped the missions first panoramic view of the touchdown spot at Mare Imbrium.

Chinese space officials have now released the dramatic surface imagery captured by the Chang’e-3 mothership on Dec. 15, via a video news report on CCTV.

To make it easier to see and sense ‘the new view from the Moon’, we have created screen shots from the rather low resolution TV broadcast and assembled them into a photo mosaic of the landing site – see above and below mosaics by Marco Di Lorenzo and Ken Kremer.

The Chang’e-3 mothership imaged the stark lunar terrain surrounding the spacecraft after the ‘Yutu’ rover perched atop successfully drove all six wheels onto the moon’s surface on Dec. 15, barely 7 hours after the momentous landing on Dec. 14.

The individual images were taken by three cameras positioned around the robotic lander.

1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer
1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer

Chinese scientists then pieced them together to form the lander’s first panoramic view of the lunar surface, according to CCTV.

“This picture is made of 60 pictures taken 3 times by the rover. The rover used three angles: vertical, 15 degrees tilted up, and 15 degrees down…so that we get an even farther view,” said Liu Enhai, Designer in Chief, Chang’E-3 Probe System, in a CCTV interview

The panoramic view shows ‘Yutu’ and its wheel tracks cutting a semi circular path at least several centimeters deep into the loose lunar regolith at the landing site at Mare Imbrium, located near the Bay of Rainbows.

After making its soft landing, the Chang’e-3’s lander took pictures around its landing spot. Credit: CCTV
After making its soft landing, the Chang’e-3’s lander took pictures around its landing spot. Credit: CCTV

A significant sized crater, several meters wide, is seen off to the left of Yutu and located only about 10 meters away from the Chang’e-3 lander.

Several more craters are visible in the pockmarked surface around the lander.

Mission leaders purposely equipped the lander with terrain recognition radar and software so that it could steer clear of hazards like craters and large boulders and find a safe spot to land.

Wheel tracks from Yutu moon rover. Credit: CNSA/CCTV
Wheel tracks from Yutu moon rover. Credit: CNSA/CCTV

Indeed just prior to touchdown, the lander actually hovered at an altitude of 100 meters for about 20 seconds to avoid the craters and rock fields which could have doomed the mission in its final moments.

See the dramatic Chang’e-3 landing video in my earlier report – here.

Here is our annotated screen shot from the landing video showing the eventual landing site in the distance:

This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer.  See the entire stunning Chang’e-3 lunar landing video – below
This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer.

The 140 kilogram Yutu rover then turned around so that the lander and rover could obtain their first portraits of one another.

“The rover reached the point of X after it went down from the lander, then it established contact with the ground. Then it went to point A, where the rover and lander took pictures of each other. Then it reached point B, where it’s standing now.” said Liu Jianjun, Deputy Chief Designer, Chang’E-3 Ground System, to CCTV.

China thus became only the 3rd country in the world to successfully soft land a spacecraft on Earth’s nearest neighbor after the United States and the Soviet Union.

Chinese President Xi Jinping and space agency leaders have hailed the Chang’e-3 mission as a complete success for China.

The Yutu rover, which translates as ‘Jade Rabbit’ will use its science instruments to survey the moon’s geological structure and composition on a minimum three month mission to locate the moon’s natural resources for use by potential future Chinese astronauts.

The lander will conduct in-situ exploration at the landing site for at least one year, say Chinese officials.

Hopefully, China will quickly start releasing full resolution imagery and video taken by the Chang’e-3 lander and Yutu rover at a dedicated mission website, like NASA does, rather than issuing photos of imagery from projection screens and televisions – so that we all can grasp the full beauty of their tremendous lunar feat.

Stay tuned here for Ken’s continuing Chang’e-3, LADEE, MAVEN, MOM, Mars rover and more news.

Ken KremerLanding site of Chinese lunar probe Chang'e-3 on Dec. 14, 2013. Landing site of Chinese lunar probe Chang’e-3 on Dec. 14, 2013. [/caption]

Speedy Spacewalkers Ahead Of Pace As Next Repair Moved To Tuesday

This broken ammonia pump is visible through the helmet camera of NASA astronaut Rick Mastracchio, who performed a spacewalk Dec. 21 to begin replacing the tank along with Mike Hopkins. Credit: NASA

The ghosts of spacewalks past did not haunt the quick-working pair of astronauts who began replacing a faulty ammonia pump on the International Space Station today (Dec. 21).

Unlike a difficult spacewalk to do a similar repair in 2010, NASA astronauts Rick Mastracchio and Mike Hopkins were so far ahead of schedule that they began doing tasks scheduled for the second in their expected trio of spacewalks.

In better news yet for the spacewalkers, a water leak in Hopkins’ spacesuit this past July — one that sent astronauts scrambling back to the airlock for safety — did not happen again, showing that the part replacement NASA directed had worked. An unrelated water issue in Mastracchio’s suit, however, made agency officials decide to delay the next spacewalk one day to Dec. 24.

The pump replacement is needed to put the space station at full fighting weight. Since Dec. 11, science experiments and other non-critical systems have been offline since a valve in the pump broke. While the astronauts are in no immediate danger, one of their two cooling loops is shut down and there is not a big margin of safety if the other loop fails.

Since this is NASA’s first spacewalk since the leaky suit was last used, the agency emphasized two new measures it has to protect the astronauts if another leak occurs. The first is a new helmet absorption pad (HAP) to soak up any water in the helmet. The second is a pipe — a snorkel — that would let astronauts breathe air from another part of the suit, if required.

But with every “HAP check” that CapCom and astronaut Doug Wheelock called up to the astronauts today, they reported that the suits were dry and everything was fine. The new water issue happened after the spacewalk, while the astronauts were repressurizing the airlock. In a statement, NASA said water could have entered Mastracchio’s suit sublimator and decided to switch him to a backup suit as a precaution.

The spacewalk tasks themselves, however, went far more swiftly than problems Wheelock experienced in 2010, such as when an ammonia line on the pump refused to unhook as required and caused a lengthy delay. NASA made some changes (such as lowering the pressure on the lines, as Wheelock told Universe Today), and this time, Mastracchio powered through the line and electrical removals. The astronauts quickly moved 1.5 hours of schedule and then beyond. A few stray ammonia flakes hit Mastracchio’s suit, but not enough to cause concerns about contamination since the traces of substance baked off in the sun as he worked.

“I don’t know if you believe in miracles, but I got it on the first try,” Mastracchio radioed early in the spacewalk as he got a tricky part of a Canadian robotic arm foot restraint threaded. Mastracchio rode the arm for much of the spacewalk while Hopkins was the “free floating” colleague hovering and doing other tasks nearby.

NASA astronaut Rick Mastracchio (right) pulls an 800-pound ammonia pump module out of its spot on the space station Dec. 21, 2013. At left is fellow NASA astronaut and Expedition 38 member Mike Hopkins. Credit: NASA TV
NASA astronaut Rick Mastracchio (right) pulls an 800-pound ammonia pump module out of its spot on the space station Dec. 21, 2013. At left is fellow NASA astronaut and Expedition 38 member Mike Hopkins. Credit: NASA TV

The most spectacular television shots occurred towards the end of the five-hour, 28-minute spacewalk when Mastracchio carefully wrestled the 800-pound ammonia pump module out of its spot on the space station while riding aboard Canadarm2. (Controlling the arm was Japanese astronaut Koichi Wakata, guided by CapCom and fellow Japanese astronaut Aki Hoshide on the ground.)

After he stowed the module, Mission Control gave the astronauts the go-ahead to put in the spare. Mastracchio, however, said he felt it was best for the astronauts to leave it for next time. While the pair have three spacewalks (including today’s) slated to finish the task, it’s possible they could wrap it up in two — but only if things go as smoothly as this time.

The next spacewalk will take place Dec. 24 at 7:10 a.m. EST (12:10 p.m. UTC), and will be available on NASA Television. We’ll keep you up to speed as the next spacewalk occurs. Today’s excursion was Mastracchio’s seventh and Hopkins’ first.

NASA astronauts Rick Mastracchio and Mike Hopkins of Expedition 38 worked outside for more than five hours Dec. 21 to begin replacing a faulty ammonia pump on the International Space Station. Credit: NASA TV
NASA astronauts Rick Mastracchio and Mike Hopkins of Expedition 38 worked outside for more than five hours Dec. 21, 2013 to begin replacing a faulty ammonia pump on the International Space Station. Credit: NASA TV

 

Watch Live As Astronauts Fix The Space Station Saturday

NASA astronaut Rick Mastracchio during a space station spacewalk on STS-131 in 2010. Credit: NASA

There’s a cooling problem on station, and two astronauts are ready to head outside to fix it. NASA astronauts Rick Mastracchio (a six-time spacewalker) and Mike Hopkins (a rookie) are expected to spend 6.5 hours “outside” starting at 7:10 a.m. EST (12:10 p.m. UTC) on Saturday. On robotics will be Japanese astronaut Koichi Wakata, who has operated every bit of robotics currently on station.

Click to watch Expedition 38’s crew action live above. (If for some reason the stream is not working, an alternate link is available here.) We’ll have full coverage of the spacewalk after it happens, too.

For a walkthrough of what’s going to happen, NASA handily provided a video that you can see below the jump. We also have links to all of our coverage so far.

In a nutshell, here’s what happened: a cooling loop shut down automatically on station Dec. 11 when the loop got too cold. NASA traced the problem to a faulty flow control valve inside of the pump. As agency officials prepared for a spacewalk just in case, NASA attempted to fix the valve and then control an alternate one from the ground.

However, the station is entering a time when there will be a lot of sun shining on it, making dockings and spacewalks difficult. To be prudent, NASA decided to do a spacewalk now and replace the pump. To keep the astronauts safe if another spacesuit leak happens again, the agency has introduced soaker pads and snorkels to the spacesuits.

Here’s what’s going to happen during the three spacewalks that are scheduled for Saturday, Monday (Dec. 23) and if necessary, Wednesday (Dec. 25), according to lead U.S. Spacewalk Officer Allison Bolinger: