China’s 1st Lunar Lander snaps 1st landing site Panorama

Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer See the complete panorama below Story updated

Portion of 1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer
See the complete panorama below
Story updated[/caption]

China’s inaugural Chang’e-3 lunar lander has snapped the missions first panoramic view of the touchdown spot at Mare Imbrium.

Chinese space officials have now released the dramatic surface imagery captured by the Chang’e-3 mothership on Dec. 15, via a video news report on CCTV.

To make it easier to see and sense ‘the new view from the Moon’, we have created screen shots from the rather low resolution TV broadcast and assembled them into a photo mosaic of the landing site – see above and below mosaics by Marco Di Lorenzo and Ken Kremer.

The Chang’e-3 mothership imaged the stark lunar terrain surrounding the spacecraft after the ‘Yutu’ rover perched atop successfully drove all six wheels onto the moon’s surface on Dec. 15, barely 7 hours after the momentous landing on Dec. 14.

The individual images were taken by three cameras positioned around the robotic lander.

1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer
1st panorama around Chang’e-3 landing site after China’s Yutu rover drove onto the Moon’s surface on Dec. 15, 2013. The images were taken by Chang’e-3 lander following Dec. 14 touchdown. Panoramic view was created from screen shots of a news video assembled into a mosaic. Credit: CNSA/CCTV/screenshot mosaics & processing by Marco Di Lorenzo/Ken Kremer

Chinese scientists then pieced them together to form the lander’s first panoramic view of the lunar surface, according to CCTV.

“This picture is made of 60 pictures taken 3 times by the rover. The rover used three angles: vertical, 15 degrees tilted up, and 15 degrees down…so that we get an even farther view,” said Liu Enhai, Designer in Chief, Chang’E-3 Probe System, in a CCTV interview

The panoramic view shows ‘Yutu’ and its wheel tracks cutting a semi circular path at least several centimeters deep into the loose lunar regolith at the landing site at Mare Imbrium, located near the Bay of Rainbows.

After making its soft landing, the Chang’e-3’s lander took pictures around its landing spot. Credit: CCTV
After making its soft landing, the Chang’e-3’s lander took pictures around its landing spot. Credit: CCTV

A significant sized crater, several meters wide, is seen off to the left of Yutu and located only about 10 meters away from the Chang’e-3 lander.

Several more craters are visible in the pockmarked surface around the lander.

Mission leaders purposely equipped the lander with terrain recognition radar and software so that it could steer clear of hazards like craters and large boulders and find a safe spot to land.

Wheel tracks from Yutu moon rover. Credit: CNSA/CCTV
Wheel tracks from Yutu moon rover. Credit: CNSA/CCTV

Indeed just prior to touchdown, the lander actually hovered at an altitude of 100 meters for about 20 seconds to avoid the craters and rock fields which could have doomed the mission in its final moments.

See the dramatic Chang’e-3 landing video in my earlier report – here.

Here is our annotated screen shot from the landing video showing the eventual landing site in the distance:

This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer.  See the entire stunning Chang’e-3 lunar landing video – below
This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer.

The 140 kilogram Yutu rover then turned around so that the lander and rover could obtain their first portraits of one another.

“The rover reached the point of X after it went down from the lander, then it established contact with the ground. Then it went to point A, where the rover and lander took pictures of each other. Then it reached point B, where it’s standing now.” said Liu Jianjun, Deputy Chief Designer, Chang’E-3 Ground System, to CCTV.

China thus became only the 3rd country in the world to successfully soft land a spacecraft on Earth’s nearest neighbor after the United States and the Soviet Union.

Chinese President Xi Jinping and space agency leaders have hailed the Chang’e-3 mission as a complete success for China.

The Yutu rover, which translates as ‘Jade Rabbit’ will use its science instruments to survey the moon’s geological structure and composition on a minimum three month mission to locate the moon’s natural resources for use by potential future Chinese astronauts.

The lander will conduct in-situ exploration at the landing site for at least one year, say Chinese officials.

Hopefully, China will quickly start releasing full resolution imagery and video taken by the Chang’e-3 lander and Yutu rover at a dedicated mission website, like NASA does, rather than issuing photos of imagery from projection screens and televisions – so that we all can grasp the full beauty of their tremendous lunar feat.

Stay tuned here for Ken’s continuing Chang’e-3, LADEE, MAVEN, MOM, Mars rover and more news.

Ken KremerLanding site of Chinese lunar probe Chang'e-3 on Dec. 14, 2013. Landing site of Chinese lunar probe Chang’e-3 on Dec. 14, 2013. [/caption]

Speedy Spacewalkers Ahead Of Pace As Next Repair Moved To Tuesday

This broken ammonia pump is visible through the helmet camera of NASA astronaut Rick Mastracchio, who performed a spacewalk Dec. 21 to begin replacing the tank along with Mike Hopkins. Credit: NASA

The ghosts of spacewalks past did not haunt the quick-working pair of astronauts who began replacing a faulty ammonia pump on the International Space Station today (Dec. 21).

Unlike a difficult spacewalk to do a similar repair in 2010, NASA astronauts Rick Mastracchio and Mike Hopkins were so far ahead of schedule that they began doing tasks scheduled for the second in their expected trio of spacewalks.

In better news yet for the spacewalkers, a water leak in Hopkins’ spacesuit this past July — one that sent astronauts scrambling back to the airlock for safety — did not happen again, showing that the part replacement NASA directed had worked. An unrelated water issue in Mastracchio’s suit, however, made agency officials decide to delay the next spacewalk one day to Dec. 24.

The pump replacement is needed to put the space station at full fighting weight. Since Dec. 11, science experiments and other non-critical systems have been offline since a valve in the pump broke. While the astronauts are in no immediate danger, one of their two cooling loops is shut down and there is not a big margin of safety if the other loop fails.

Since this is NASA’s first spacewalk since the leaky suit was last used, the agency emphasized two new measures it has to protect the astronauts if another leak occurs. The first is a new helmet absorption pad (HAP) to soak up any water in the helmet. The second is a pipe — a snorkel — that would let astronauts breathe air from another part of the suit, if required.

But with every “HAP check” that CapCom and astronaut Doug Wheelock called up to the astronauts today, they reported that the suits were dry and everything was fine. The new water issue happened after the spacewalk, while the astronauts were repressurizing the airlock. In a statement, NASA said water could have entered Mastracchio’s suit sublimator and decided to switch him to a backup suit as a precaution.

The spacewalk tasks themselves, however, went far more swiftly than problems Wheelock experienced in 2010, such as when an ammonia line on the pump refused to unhook as required and caused a lengthy delay. NASA made some changes (such as lowering the pressure on the lines, as Wheelock told Universe Today), and this time, Mastracchio powered through the line and electrical removals. The astronauts quickly moved 1.5 hours of schedule and then beyond. A few stray ammonia flakes hit Mastracchio’s suit, but not enough to cause concerns about contamination since the traces of substance baked off in the sun as he worked.

“I don’t know if you believe in miracles, but I got it on the first try,” Mastracchio radioed early in the spacewalk as he got a tricky part of a Canadian robotic arm foot restraint threaded. Mastracchio rode the arm for much of the spacewalk while Hopkins was the “free floating” colleague hovering and doing other tasks nearby.

NASA astronaut Rick Mastracchio (right) pulls an 800-pound ammonia pump module out of its spot on the space station Dec. 21, 2013. At left is fellow NASA astronaut and Expedition 38 member Mike Hopkins. Credit: NASA TV
NASA astronaut Rick Mastracchio (right) pulls an 800-pound ammonia pump module out of its spot on the space station Dec. 21, 2013. At left is fellow NASA astronaut and Expedition 38 member Mike Hopkins. Credit: NASA TV

The most spectacular television shots occurred towards the end of the five-hour, 28-minute spacewalk when Mastracchio carefully wrestled the 800-pound ammonia pump module out of its spot on the space station while riding aboard Canadarm2. (Controlling the arm was Japanese astronaut Koichi Wakata, guided by CapCom and fellow Japanese astronaut Aki Hoshide on the ground.)

After he stowed the module, Mission Control gave the astronauts the go-ahead to put in the spare. Mastracchio, however, said he felt it was best for the astronauts to leave it for next time. While the pair have three spacewalks (including today’s) slated to finish the task, it’s possible they could wrap it up in two — but only if things go as smoothly as this time.

The next spacewalk will take place Dec. 24 at 7:10 a.m. EST (12:10 p.m. UTC), and will be available on NASA Television. We’ll keep you up to speed as the next spacewalk occurs. Today’s excursion was Mastracchio’s seventh and Hopkins’ first.

NASA astronauts Rick Mastracchio and Mike Hopkins of Expedition 38 worked outside for more than five hours Dec. 21 to begin replacing a faulty ammonia pump on the International Space Station. Credit: NASA TV
NASA astronauts Rick Mastracchio and Mike Hopkins of Expedition 38 worked outside for more than five hours Dec. 21, 2013 to begin replacing a faulty ammonia pump on the International Space Station. Credit: NASA TV

 

Hubble Looks but Finds No Trace of Comet ISON

Each of the four panels is a combination of two separate exposures made by the Hubble Space Telescope as it tracked Comet ISON's position. Had the comet been in any of these frames, it would have appeared as a small fuzzy glow or stellar point(s) in the center. The stars are trailed because the camera tracked the comet. Credit: NASA/ESA
Each of the four panels is a combination of two separate exposures made by the Hubble Space Telescope as it tracked Comet ISON's position. Had the comet been in any of these frames, it would have appeared as a small fuzzy glow or stellar point(s) in the center. The stars are trailed because the camera tracked the comet. Credit: NASA/ESA

On December 18, the Hubble Space Telescope slewed to Comet ISON’s expected position and found nothing down to the incredibly faint magnitude of 25. According to astronomer Hal Weaver, who planned the ISON search, that limit implies any remaining fragments would have to be smaller than about 500 feet (160 meters) in diameter. 

Composite photo of one of two Comet ISON locations photographed by the Hubble in a way that suppresses features not in the same place. No trace of the comet is visible. Credit: NASA/ESA
Composite photo of one of two Comet ISON locations photographed by the Hubble Space Telescope. No trace of the comet is visible. Credit: NASA/ESA

Nothing is visible in any of the images in the photo panel except trailed stars and galaxies, reflections and the occasional zap of a cosmic ray. After ISON was torn asunder by the sun, there existed the possibility that comet’s remains would follow a slightly different orbit. To make sure he was covered, Weaver photographed two separate comet positions, stacking several exposures together.

Comet ISON photographed at a second location. Again, nothing detected. Credit: NASA/ESA
Comet ISON photographed at a second location. Again, nothing detected. Credit: NASA/ESA

“The images have been combined so that features not at the same place in the various images are suppressed. Any comet fragments would show up more clearly in this composite, though stars still show up as faint streaks”, writes Zolt Lavay, author of the ISONblog at the Hubble site.

Again, nothing shows up in these either. While no one can say that ISON has completely disappeared, we now know that at the very least it’s broken into pieces too small for even Hubble to see. What was once a beautiful sight in binoculars has expanded into a vast cloud of gas and dust thinner than Ebenezer Scrooge’s gruel.

Watch Live As Astronauts Fix The Space Station Saturday

NASA astronaut Rick Mastracchio during a space station spacewalk on STS-131 in 2010. Credit: NASA

There’s a cooling problem on station, and two astronauts are ready to head outside to fix it. NASA astronauts Rick Mastracchio (a six-time spacewalker) and Mike Hopkins (a rookie) are expected to spend 6.5 hours “outside” starting at 7:10 a.m. EST (12:10 p.m. UTC) on Saturday. On robotics will be Japanese astronaut Koichi Wakata, who has operated every bit of robotics currently on station.

Click to watch Expedition 38’s crew action live above. (If for some reason the stream is not working, an alternate link is available here.) We’ll have full coverage of the spacewalk after it happens, too.

For a walkthrough of what’s going to happen, NASA handily provided a video that you can see below the jump. We also have links to all of our coverage so far.

In a nutshell, here’s what happened: a cooling loop shut down automatically on station Dec. 11 when the loop got too cold. NASA traced the problem to a faulty flow control valve inside of the pump. As agency officials prepared for a spacewalk just in case, NASA attempted to fix the valve and then control an alternate one from the ground.

However, the station is entering a time when there will be a lot of sun shining on it, making dockings and spacewalks difficult. To be prudent, NASA decided to do a spacewalk now and replace the pump. To keep the astronauts safe if another spacesuit leak happens again, the agency has introduced soaker pads and snorkels to the spacesuits.

Here’s what’s going to happen during the three spacewalks that are scheduled for Saturday, Monday (Dec. 23) and if necessary, Wednesday (Dec. 25), according to lead U.S. Spacewalk Officer Allison Bolinger:

Stunning Chang’e-3 Lunar Landing Video gives Astronauts Eye View of Descent & Touchdown

This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer. See the entire stunning Chang’e-3 lunar landing video – below

This screen shot from one photo of many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013 shows the probe approaching the Montes Recti mountain ridge and approximate location of the landing site in Mare Imbrium. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Image and video rotated 180 degrees.
Credit: Xinhua/CCTV/post processing and annotations Marco Di Lorenzo /Ken Kremer
See the entire stunning Chang’e-3 lunar landing video – below
Story updated

[/caption]

China accomplished a major technological and scientific feat when the country’s ambitious Chang’e-3 robotic spacecraft successfully soft landed on the Moon on Dec. 14 – on their very first attempt to conduct a landing on an extraterrestrial body.

Along the way the descent imaging camera aboard the Chang’e-3 lander was furiously snapping photos during the last minutes of the computer guided descent.

For a firsthand look at all the thrilling action, be sure to check out the stunning landing video, below, which gives an astronauts eye view of the dramatic descent and touchdown by China’s inaugural lunar lander and rover mission.

The video was produced from a compilation of descent camera imagery. The version here has been rotated 180 degrees – so you don’t have to flip yourself over to enjoy the ride.

And it truly harkens back to the glory days of NASA’s manned Apollo lunar landing program of the 1960’s and 1970’s.

Photo taken on Dec. 14, 2013 shows a picture of the moon surface taken by the on-board camera of lunar probe Chang'e-3 on the screen of the Beijing Aer Control Center in Beijing.   This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body.  Credit: Xinhua/CCTV
This is one photo from many of the moons surface snapped by the on-board descent imaging camera of the Chinese lunar probe Chang’e-3 on Dec. 14, 2013. This marks the first time that China has sent a spacecraft to soft land on the surface of an extraterrestrial body. Credit: Xinhua/CCTV
See the entire stunning Chang’e-3 lunar landing video – herein

The dramatic Chang’e-3 soft landing took place at Mare Imbrium at 8:11 am EST, 9:11 p.m. Beijing local time, 1311 GMT, which is to the east of the announced landing site on the lava filled plains of the Bay of Rainbows, or Sinus Iridum region.

The precise landing coordinates were 44.1260°N and 19.5014°W -located below the Montes Recti mountain ridge and about 40 kilometers south of the 6 kilometer diameter crater known as Laplace F – see image below.

Landing site of Chinese lunar probe Chang'e-3 on Dec. 14, 2013.
Landing site of Chinese lunar probe Chang’e-3 on Dec. 14, 2013.

The video begins as Chang’e-3 is approaching the Montes Recti mountain ridge which is about 90 km in length. Its peaks rise to nearly 2 km.

Chang’e-3 carried out the rocket powered descent to the Moon’s surface by firing the landing thrusters starting at the altitude of 15 km (9 mi) for a soft landing targeted to a preselected area in Mare Imbrium.

The vehicles thrusters then fire to pivot the lander towards the surface at about the 2:40 minute mark when it’s at an altitude of roughly 3 km.

Infographic shows the process of the soft-landing on the moon of China's lunar probe Chang'e-3 on Dec. 14, 2013. Credit: SASTIND/Xinhua /Zheng Yue
Infographic shows the process of the soft-landing on the moon of China’s lunar probe Chang’e-3 on Dec. 14, 2013. Credit: SASTIND/Xinhua /Zheng Yue

The powered descent was autonomous and preprogrammed and controlled by the probe itself, not by mission controllers on Earth stationed at the Beijing Aerospace Control Center (BACC) in Beijing.

Altogether it took about 12 minutes using the variable thrust engine which can continuously vary its thrust power between 1,500 to 7,500 newtons.

The variable thrust engine enabled Chang’e-3 to reduce its deceleration as it approached the moons rugged surface.

Photo taken on Dec. 14, 2013 shows the landing spot of lunar probe Chang'e-3  indicated on the screen of the Beijing Aerospace Control Center in Beijing, capital of China. Credit: Xinhua/Li
Photo taken on Dec. 14, 2013 shows the landing spot of lunar probe Chang’e-3 indicated on the screen of the Beijing Aerospace Control Center in Beijing, capital of China. Credit: Xinhua/Li

The 1200 kg lander was equipped with unprecedented terrain recognition equipment and software to hover above the landing site and confirm it was safe before proceeding.

This enabled the craft to avoid hazardous rock and boulder fields as well as craters in the pockmarked terrain that could spell catastrophe even in the final seconds before touchdown, if the vehicle were to land directly on top of them.

The descent engine continued firing to lower the lander until it was hovering some 100 meters above the lunar surface – at about the 5:10 minute mark.

Chang'e-3 hovered 100m high for 20 seconds before committing to land. This allows the on-board computer to make sure it doesn't land in a crater or an uneven place.  Credit: China Space
Chang’e-3 hovered 100m high for 20 seconds before committing to land. This allows the on-board computer to make sure it doesn’t land in a crater or an uneven place. Credit: China Space

After hovering for about 20 seconds and determining it was safe to proceed, the lander descended further to about 3 meters. The engine then cut off and the lander free fell the remaining distance. The impact was cushioned by shock absorbers.

There is a noticeable dust cloud visible on impact as the Chang’e-3 mothership touched down atop the plains of Mare Imbrium.

Chang'e-3 lander imaged by the rover Yutu on the moon on Dec. 15, 2013.  Note landing ramp at bottom. Credit: CCTV
Chang’e-3 lander imaged by the rover Yutu on the moon on Dec. 15, 2013. Note landing ramp at bottom. Credit: CCTV

Barely 7 hours later, China’s first ever lunar rover ‘Yutu’ rolled majestically down a pair of ramps and onto the Moon’s soil on Sunday, Dec. 15 at 4:35 a.m. Beijing local time.

The six wheeled ‘Yutu’, or Jade Rabbit, rover drove straight off the ramps and sped right into the history books as it left a noticeably deep pair of tire tracks behind in the loose lunar dirt.

China's first lunar rover separates from Chang'e-3 moon lander early Dec. 15, 2013. Screenshot taken from the screen of the Beijing Aerospace Control Center in Beijing. Credit: Xinhua/post processing by Marco Di Lorenzo/Ken Kremer
China’s first lunar rover separates from Chang’e-3 moon lander early Dec. 15, 2013. Screenshot taken from the screen of the Beijing Aerospace Control Center in Beijing. Credit: Xinhua/post processing by Marco Di Lorenzo/Ken Kremer

The stunning feat was broadcast on China’s state run CCTV.

China thus became only the 3rd country in the world to successfully soft land a spacecraft on Earth’s nearest neighbor after the United States and the Soviet Union.

It’s been nearly four decades since the prior lunar landing was accomplished by the Soviet Union’s Luna 24 sample return spacecraft back in 1976.

America’s last visit to the Moon’s surface occurred with the manned Apollo 17 landing mission – crewed by astronauts Gene Cernan and Harrison ‘Jack’ Schmitt , who coincidentally ascended from the lunar soil on Dec. 14, 1972 – exactly 41 years ago.

China’s Chang’e-3 probe joins NASA’s newly arrived LADEE lunar probe which entered lunar orbit on Oct. 6 following a spectacular night time blastoff from NASA’s Wallops Flight Facility in Virginia.

Stay tuned here for Ken’s continuing Chang’e-3, LADEE, MAVEN, MOM, Mars rover and more news.

Ken KremerMoon map showing landing site of Chinese lunar probe Chang'e-3 on Dec. 14, 2013 below Montes Recti in Mare Imbrium beside Sinus Iridum, or the Bay of Rainbows .  Credit: China Space Moon map showing landing site of Chinese lunar probe Chang’e-3 on Dec. 14, 2013 below Montes Recti in Mare Imbrium beside Sinus Iridum, or the Bay of Rainbows . Credit: China Space[/caption]

Image shows the trajectory of the lunar probe Chang'e-3 approaching the landing site  on Dec. 14.
Image shows the trajectory of the lunar probe Chang’e-3 approaching the landing site on Dec. 14.

After Facing Down Ammonia Leak, This Astronaut Will Help Crew During Spacewalks

NASA astronaut Doug Wheelock, who was commander of Expedition 25. This 2010 picture of him also shows the Sabatier system that extracts drinkable water from the International Space Station's atmosphere. Credit: NASA

When you learned to drive a car for the first time, remember how comforting it was to have an experienced driver beside you, able to anticipate the hazards and keep you on schedule?

That’s surely how the Expedition 38 crew feels about one of the voices “on the line” as two astronauts prepare to venture outside to replace a crippled ammonia pump. One of the “CapComs” or people communicating with the crew on Saturday, Monday and Wednesday will be astronaut Doug Wheelock — who just happens to be known for co-replacing a broken ammonia tank himself in 2010. (The other CapCom is Japanese astronaut Aki Hoshide, who will chat through robotic procedures with Koichi Wakata).

Wheelock is the visible edge of hundreds — likely thousands — of people working feverishly at NASA and its international partners this past week to get the spacewalks ready through pool simulations, a virtual reality lab and other means. Several backup and non-critical space station systems are offline because of that pump, which has to regulate temperatures properly for vital electronics to work.

“I am their choreographer,” Wheelock told Universe Today of his plan for the astronauts. While spacewalkers Mike Hopkins and Rick Mastracchio already know what they are supposed to do when, Wheelock said he will be “their eyes and ears on the timeline.” If something needs to be stopped or changed, he’ll help them figure out what to do next.

NASA astronaut Doug Wheelock anchored to Canadarm2 during an August 2010 spacewalk. He and Tracy Caldwell Dyson ventured outside three times during Expedition 24 to swap out and replace a broken ammonia pump. Credit: NASA
NASA astronaut Doug Wheelock anchored to Canadarm2 during an August 2010 spacewalk. He and Tracy Caldwell Dyson ventured outside three times during Expedition 24 to swap out and replace a broken ammonia pump. Credit: NASA

Wheelock and fellow astronaut Tracy Caldwell Dyson had to spring into action themselves in August 2010. A pump in the same location broke, forcing space station systems offline and requiring them to go outside a few days later. With astronaut Shannon Walker piloting Canadarm2, the astronauts accomplished their tasks in three spacewalks — but encountered obstacles along the way.

During the first spacewalk, as Wheelock disconnected lines from the broken pump, he not only faced a pipe that wouldn’t let go, but a shower of ammonia snowflakes. That was “what got me on the EVA [extra-vehicular activity],” he recalled. That’s why NASA plans to lower the line pressure on the cooling system before the astronauts head outside this time. Normally the lines are pressurized at 360 pounds per square inch, but they’ll be lowered to 120 psi through commands from the ground.

Other “lessons learned” are more recent. Italian astronaut Luca Parmitano was wearing a NASA spacesuit in July when he experienced a water leak in his helmet, putting him at risk and terminating the spacewalk early. This will be the first spacewalk since that time. NASA believes it has replaced the part of the suit that failed, but the agency has new backups in place. Hopkins and Mastracchio will have soaker pads in their helmets as well as a “snorkel”-like device, or tube that will let them breathe oxygen from a different part of the suit if water flows into the helmet again.

Allison Bolinger, NASA's lead U.S. spacewalk officer, holds up a snorkel-like device that astronauts began using in spacesuits in December 2013. The pipe (modified from spacesuit parts) is supposed to be a backup if a helmet fills with water, as what occurred during a July 2013 spacewalk. Credit: NASA (YouTube/screenshot)
Allison Bolinger, NASA’s lead U.S. spacewalk officer, holds up a snorkel-like device that astronauts began using in spacesuits in December 2013. The pipe (modified from spacesuit parts) is supposed to be a backup if a helmet fills with water, as what occurred during a July 2013 spacewalk. Credit: NASA (YouTube/screenshot)

So what are some key parts of the spacewalks to look for? Wheelock identified a few spots.

‘HAP’ check. That soaker pad is called a “helmet absorption pad”, and as a matter of course the astronauts will be asked to verify that the pad is not wet at the same time that they also check their gloves for tears (another lesson learned from a past spacewalk.) So you will hear Wheelock calling “HAP check” from time to time to the crew.

Unlatching and latching the ammonia connectors on the pumps. Because this is when leaks are most likely to occur — posing a risk to Mastracchio, who is performing the work — Wheelock is going to do a “challenge and response” procedure. He will read up the step, the astronaut will verify it and will do the work. There will be “a lot more chatter on the [voice] loop” during those times, Wheelock said, with everyone on the ground watching through Mastracchio’s head camera feed (visible at the front of the room) to see what is happening. “There will be a lot of people standing in Mission Control at that point,” he joked, himself included.

Leak procedures. If ammonia does start to shower out, Mastracchio will quickly close the valve and wait a few minutes as it could be just residual ammonia in the line. If that doesn’t work out, Mastracchio is trained on a procedure to attach a device to the front end of the connector and move a lever that prevents a cavity in the line from filling with ammonia. Then he can open the valve again, bleed out the ammonia that’s left over and keep going.

NASA astronaut Rick Mastracchio inspects two spacesuits to be used during spacewalks in December 2013. The spacewalks were to remove and replace a faulty ammonia pump. Credit: NASA TV
NASA astronaut Rick Mastracchio inspects two spacesuits to be used during spacewalks in December 2013. The spacewalks were to remove and replace a faulty ammonia pump. Credit: NASA TV

Decontamination procedures. The ammonia makes a distinctive “ping” when it hits the helmet, says Wheelock (who yes, heard that happen himself.) You can also see ammonia on the suit, he said, as it looks a bit like candle wax and obscures the stitching. All of which to say, NASA has procedures in place if the agency suspects or can confirm large amounts of ammonia got on Mastracchio’s suit. (Small amounts would essentially fleck off in the sun.) Hopkins, who will be out of the line of fire, can do a thorough inspection of Mastracchio and scrape off any ammonia with a warm metal tool — without hurting the suit underneath. The astronauts could also do a “bakeout” in the airlock — 30 minutes if suspected, an hour if confirmed — where they will sit with the hatch open and wait for any ammonia to sublimate off the suit. Once they close the hatch, the astronauts can verify if the ammonia is gone using Drager tubes, which have gold crystals inside that turn “purpleish blue” in the presence of ammonia, Wheelock said.

Margin calls. Because NASA needs to make sure the astronauts have 30 to 60 minutes to decontaminate at the end of their spacewalks, officials will preserve a margin of oxygen available for the astronauts to walk through that work. So it’s possible the agency may terminate a spacewalk before all tasks are completed just because they need that bit of margin at the end.

To learn more, Wheelock has been answering questions occasionally on his Twitter account from followers, and you can read through what he posts when he finds the time. Universe Today will also cover the spacewalks (currently planned for Saturday, Monday and Wednesday) as they occur.

Rare White Dwarf Systems Do A Doubletake

For those of us who remain forever fascinated by astronomy, nothing could spark our imaginations more than a cosmic curiosity. In this case, the unusual object is a star cataloged as AM Canum Venaticorum (AM CVn) located in the constellation of Canes Venatici. What makes this dual star system of interest? Try the fact that the pair revolve completely around each other in a brief 18 minutes. What’s more, they are the stuff of which Einstein dreamed… creators of ripples in space-time known as gravitational waves.

Like other astronomical anomalies, AM CVn became the forerunner of a new class of stellar objects. It is a white dwarf, a sun-like star which has exhausted its fuel and collapsed to around the size of Earth. Yet it also has a white dwarf companion – a very compact orb which is delivering matter to its neighbor. AM Canum Venaticorum is not alone, however. There are similar systems where the stellar pairs complete their rotations in about an hour and even as rapidly as five minutes! Can you imagine the crackling amount of energy a system like this produces?!

Even though we have been aware of systems like AM CVn for almost five decades, no one is quite sure how they originate. Now, through the use of X-ray and optical observations, astronomers are taking a look at newly evolved double stars systems which one day might become a dueling duo dwarf. Heading their list are two binary systems, J0751 and J1741. These candidates were observed in the X-ray part of the electromagnetic spectrum by NASA’s Chandra X-ray Observatory and ESA’s XMM-Newton telescope. In addition, observations at optical wavelengths were made using the McDonald Observatory’s 2.1-meter telescope in Texas, and the Mt. John Observatory 1.0-meter telescope in New Zealand.

dual_dwarf“The artist’s illustration depicts what these systems are like now and what may happen to them in the future. The top panel shows the current state of the binary that contains one white dwarf (on the right) with about one-fifth the mass of the Sun and another much heavier and more compact white dwarf about five or more times as massive (unlike Sun-like stars, heavier white dwarfs are smaller).” says the Chandra X-ray Observatory news release.

What’s happening here? As the pair of white dwarf stars whip around each other, they are releasing gravitational waves which constrict the orbit. In time, the heavier, diminutive dwarf will begin stripping material from its lighter, larger companion (as seen in the middle panel). This material consumption will continue for perhaps a 100 million years, or until the collected matter reaches a critical mass and releases a thermonuclear explosion.

Another scenario is the thermonuclear explosion could annihilate the larger white dwarf completely in what astronomers call a Type Ia supernova. An event like this is well-known and gives a measurement in standard candles for cosmic distance. However, chances are better the explosion will happen on the surface of the star – an event known as .Ia supernovae. While .Ia supernovae events have been recorded in other galaxies, J0751 and J1741 are the first binary stars which have the potential to erupt in .Ia supernovae.

“The optical observations were critical in identifying the two white dwarfs in these systems and ascertaining their masses. The X-ray observations were needed to rule out the possibility that J0751 and J1741 contained neutron stars.” says the Chandra team. “A neutron star – which would disqualify it from being a possible parent to an AM CVn system – would give off strong X-ray emission due to its magnetic field and rapid rotation. Neither Chandra nor XMM-Newton detected any X-rays from these systems.”

Are AM CVn systems riding the gravitational wave? While astronomers haven’t been able to detect them yet, these new observations are highly important because equipment to verify their presences is currently being developed. It won’t be long until we can see the wave and have a whole new way of looking at the Universe!

Original Story Source: Chandra Observatory News Release.

The 2013 Super and Mini Moon Together in One Photo

A composition of the nearest and farthest 2013 full moons, with the SuperMoon of June on the left and the MiniMoon of December on the right. Credit and copyright: Giuseppe Petricca.

Astrophotographer Giuseppe Petricca from Pisa, Tuscany, Italy managed to capture two of the very ‘special’ full Moons from 2013 and created a comparative mosaic. Here is both the 2013 “SuperMoon” in June – when the Moon is the closest to Earth in its orbit and visually largest – and the recent December 2013 “MiniMoon” — the most distant and visually smallest Full Moon of the year.

“I was amazed, to say the least, from the actual difference!” Petricca told Universe Today via email. “The motto ‘It’s not that evident until you, by yourself, get to notice it!’ applies perfectly to this situation.

While with naked eye, the full Moon seems about the same size every month, the difference in its visual size is clearly visible via pictures. Of course, the Moon itself doesn’t change size, it’s just how big or small it appears in the sky due to the eccentricities in its orbit around Earth.

The two pictures were both taken at the same focal length, with a simple non reflex camera, a Nikon P90, on tripod, with matching ISO speed and exposure, at ISO 100, f5.0, 1/200″. Both taken from Pisa, Tuscany, Italy.

You can read all about the recent “MiniMoon” here, and find out more about the mechanics of the “SuperMoon” here.

App Review: Earth or Not Earth

The folks at Cosmoquest have released a cool new citizen science app for Android! “Earth or Not Earth” allows players to test their knowledge of Earth, as well as learn more about the fascinating geology of the rocky worlds in our solar system. You can also challenge your friends on Facebook to beat your scores, thanks to the Facebook integration feature.

“Earth or Not Earth” was developed by Southern Illinois University graduate student and Cosmoquest developer Joseph Moore. Moore designed “Earth or Not Earth,” and included two additional game features: “Matching” and “Pick 2.” The images used in “Earth or Not Earth” are public domain, and are sourced primarily from NASA planetary science missions, with more images to be added to the app in the future.

The app does cost $1.99 USD, and the Proceeds from “Earth or Not Earth” help fund the programmers at Cosmoquest, as well as citizen science programs, educational programs, and future mobile apps.

"Earth or Not Earth" Main Menu - Click to embiggen
“Earth or Not Earth” main menu – Click to embiggen.
Image Credit: Cosmoquest
The user interface for “Earth or Not Earth” is pretty straightforward. After installing the app, the initial screen will prompt users to login with their Cosmoquest credentials (or create a new account). While some may see this as an annoyance, a Cosmoquest account allows access to many of the other citizen science projects Cosmoquest offers, such as Moon Mappers, Asteroid Mappers, and others.

After logging in, users are able to select one of several game-play options.

Players can start with the “Learn” section, which allows users to learn more about the rocky worlds in our solar system. Additionally, users can learn about geologic features such as craters, volcanism, fault lines, and even man-made surface alterations.

After learning about the processes that shape and alter rocky worlds in our solar system, users can test their knowledge with the “Earth or Not Earth”, “Matching”, or “Pick Two” mini-games.

Earth or Not Earth? Click to embiggen. Image Credit: Cosmoquest
Earth or Not Earth?
Click to embiggen.
Image Credit: Cosmoquest
“Earth or Not Earth” Displays images from various NASA planetary missions. The goal for the player is to determine if the image is of Earth, or Not. For those looking for a greater challenge, the “Matching” minigame provides an image that players must try to match to a rocky world, or a planetary geology process.

The most challenging mini-game in “Earth or Not Earth” is “Pick Two”, where players select two images that belong to the same world out of several shown on screen. With some images being in color, and others in black and white, players must rely on the knowledge gained from the “Learn” feature to make educated deductions about which images belong to which world.

Fans of planetary science will find “Earth or Not Earth” a challenging, yet entertaining and educational gaming experience. Gameplay is quick, and makes for a nice break between meetings, or something to pass the time while waiting to catch the bus.

“Earth or Not Earth” is available from the Google Play store at: https://play.google.com/store/apps/details?id=org.cosmoquest.earthnotearth If you’d like to learn more about how the app was developed, Cosmoquest has a blog post available at: http://cosmoquest.org/blog/2013/12/got-earth/