Monster sunspot group 1890 now faces Earth. Taken on Nov. 8, 2013. Credit and copyright: Ron Cottrell.
The Sun is finally acting like it’s in solar maximum. Our Sun has emitted dozens of solar flares in since Oct. 23, 2013, with at least six big X-class flares. Just today it blasted out a X1.1 flare at 04:32 UT (11:32 p.m. EST on Nov. 7, 2013). While old Sol had been fairly quiet for the time where it was supposed to be active in its normal 11-year cycle, only recently has activity ramped up with increased flares and sunspots. During 2013, there has been intermittent strong activity (like this and this in May), but the activity since mid-October is really the first extended period of activity.
Speaking of sunspots, a huge group called designated as AR 1890 has turned to face Earth. Thanks to astrophotographer Ron Cottrell for capturing the group today, above. Spaceweather.com reports that this sunspot has a trend of producing very brief flares. The X1-flare today was no exception as it lasted barely a minute. NOAA is forecasting a 60% chance of M-class solar flares and a 20% chance of X-flares on Nov. 8th from this sunspot group.
You can see an image from the Solar Dynamics Observatory below, as it recorded a flash of extreme UV radiation from the blast site:
NASA’s Solar Dynamics Observatory captured this image of the sun showing an X1.1 class flare that peaked at 11:26 p.m. EST on Nov. 7, 2013. Increased numbers of flares are quite common at the moment as the sun’s normal 11-year activity cycle is ramping up toward solar maximum conditions. Image Credit: NASA/SDO
NASA describes a solar flare as such:
A flare is defined as a sudden, rapid, and intense variation in brightness. A solar flare occurs when magnetic energy that has built up in the solar atmosphere is suddenly released. Radiation is emitted across virtually the entire electromagnetic spectrum, from radio waves at the long wavelength end, through optical emission to x-rays and gamma rays at the short wavelength end. The amount of energy released is the equivalent of millions of 100-megaton hydrogen bombs exploding at the same time.
While solar flares are powerful bursts of radiation, harmful radiation from a flare cannot pass through Earth’s atmosphere to physically affect humans on the ground. But when they are intense enough, they can disturb the atmosphere in the layer where GPS and communications signals travel.
Host: Fraser Cain
Guests: Thad Szabo, Scott Lewis, Ian O’Neill, Alan Boyle, Nancy Atkinson, David Dickinson, Jason Major, Matthew Francis, Nicole Gugliucci
Take a ride on the Mercury express and see what MESSENGER sees in these two new videos! Each made from over 280 Narrow-Angle Camera (NAC) images taken at intervals of four seconds, the videos give us a first-class seat on a flight over some of the rugged, sun-scorched surfaces on Mercury’s southern hemisphere.
Virgin Galactic's WhiteKnightTwo and SpaceShipTwo. Think you could fly them? Credit: Virgin Galactic.
In true Richard Branson flair, the founder of Virgin Galactic has a multimedia plan in place for when he and his adult children, Holly and Sam, take the first planned tourist spaceflight next year. Virgin Galactic and NBCUniversal signed a “multi-platform partnership” for the network’s affiliates to transmit the flight all over the place.
Disclosed platforms so far include CNBC, MSNBC, NBCNews.com, Syfy and The Weather Channel. They also plan a “primetime special” on NBC on the launch’s eve, and to host a live event for three hours on NBC’s Today show. Financial terms were not released.
“Virgin Galactic is thrilled that NBCUniversal will join us on our exciting first journey to space,” stated Branson. “In this first chapter of commercial space travel, we will help make space accessible and inspire countless more people to join us in the pursuit of space exploration and science innovation.”
Virgin’s SpaceShipTwo is in the midst of powered flight tests and the company has hundreds of people signed up for flights. The company is one of several American contenders to run space tourism flights regularly, with XCOR Aerospace and Amazon founder Jeff Bezos’ Blue Origin among the most cited competitors.
Astronauts from Expeditions 37, 38 and 39 during a rare space station press conference Nov. 8, 2013. Front row, left to right: NASA astronaut Karen Nyberg, Russian cosmonaut Fyodor Yurchikhin and European Space Agency astronaut Luca Parmitano. Middle row, left to right: NASA astronaut Michael Hopkins, Russian cosmonaut Oleg Kotov and Russian cosmonaut Russian cosmonaut Sergey Ryazanskiy. Back row, left to right: NASA astronaut Rick Mastracchio, Japanese astronaut Koichi Wakata and Russian cosmonaut Mikhail Tyurin. Credit: NASA TV (screencap)
Things are a little more crowded than usual in the International Space Station. For a few days, nine astronauts and cosmonauts are floating in the cramped quarters of the orbiting complex. Typical crew sizes range between three and six. How did the astronauts find room to work and sleep?
“One of the things we had to do was make space for them,” said European Space Agency astronaut Luca Parmitano in a rare press conference today (Nov. 8) from orbit, which included participation from Universe Today. He then explained a procedure where the astronauts swapped a Soyuz crew spacecraft from one Russian docking port to another a few days before Expedition 38/39’s crew arrived on board on Thursday. This cleared the way for three more people to arrive.
“We [also] had to adjust for emergency procedures. All of our procedures are trained and worked for a group of six. We had to work on a way to respond if something happened.” As for sleeping, it was decided the six people already on board, “as seniority, would stay in the crew quarters.” The newer astronauts have temporary sleeping arrangements in other modules until the ranks thin out a bit on Sunday.
So this works for a short while, but what about the long-term? Could the station handle having nine people there for weeks at a time, rather than six, and would there be enough science work to go around?
Luca Parmitano controlling the K-10 rover from space on July 26, 2013 in a test intended to see how well astronauts in a spacecraft can communicate with rovers on the surface. This information could be used for missions far in the future. Credit: NASA Television (screencap)
“I think, absolutely, moving to nine people is doable and in terms of the science would be fantastic,” NASA astronaut Karen Nyberg said. The station partners had experience with increasing crews before, she added, as for several years a regular space station rotation was only three astronauts during construction. Bumping up to the current maximum of six was a “big jump.”
“One of the things to be concerned about our environmental control system, our CO2 [carbon dioxide scrubbing] system … and also the consumables and the supplies we need,” she added. “Making up the science for us to do would be very doable. I think the hard part would be getting the systems to accommodate nine people.”
Parmitano, Nyberg and Russian cosmonaut Fyodor Yurchikhin plan to return to Earth Sunday, but a busy weekend lies ahead. On Saturday, Roscosmos (Russian Federal Space Agency) flight engineers Oleg Kotov and Sergey Ryazanskiy of the Russian Federal Space Agency will start a spacewalk around 9:30 a.m. EST (2:30 p.m. UTC) if all goes to plan.
Expedition 38/39 poses with the Olympic torch that they brought into orbit with them in November 2013 as part of the relay for the 2014 Games in Sochi, Russia. From left, Koichi Wakata of the Japan Aerospace Exploration Agency, Mikhail Tyurin of Roscosmos, and Rick Mastracchio of NASA. Credit: NASA/Bill Ingalls
As part of the Olympic torch relay ahead of the Sochi games in 2014, they will briefly bring the Olympic torch outside with them, unlit, before doing some outside maintenance.
“After the photo opportunity, Kotov and Ryazanskiy will prepare a pointing platform on the hull of the station’s Zvezda service module for the installation of a high resolution camera system in December, relocate … a foot restraint for use on future spacewalks and deactivate an experiment package,” NASA stated in a Thursday press release.
Several journalists were unable to ask questions during the NASA portion of the press conference, which included participation from countries covered by NASA, the European Space Agency, the Japanese Aerospace Exploration Agency and Roscosmos (the Russian Federal Space Agency).
“We had a failure in a crucial component in the phone bridge,” NASA spokesman Kelly Humphries told Universe Today following the media event. They don’t know what component failed, but most of the journalists were unable to hear the moderator or the astronauts.
“A piece of equipment picked the wrong time to fail,” Humphries said
NASA will do a thorough investigation before holding another event like this to make sure it works for everyone.
Much to learn about Pluto's surface we have. (Screenshot)
Of course you do! (Who doesn’t?) And so here’s a wonderful tour of our Solar System to provide you with just the type of space you need.
A 3D animation project by Australian video artist Shane Gehlert, I Need Some Space takes us from low-Earth orbit to the Moon and Sun and then through the lineup of planets in the Solar System, using images and models from NASA to accurately depict their unique appearances. Along the way we’ll get some basic info on the planets, select moons, and a few of the various spacecraft that have visited (or are visiting) each world. Set to an intriguing string score by The Zephyr Quartet (of which Shane’s sister Belinda is a member) I Need Some Space is a mesmerizing 6-minute voyage for any space fan — myself very included.
I particularly like the “ghostly” look of Pluto, reminding us that we still have another year and a half before New Horizons reveals its true appearance to us.
Enjoy! (As with most videos, full-screening and HD-ing are strongly suggested.)
Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a crane moves the service module for the Orion spacecraft toward a lift station where it will be mated to the spacecraft adapter cone. Photo credit: NASA/Jim Grossmann
KENNEDY SPACE CENTER, FL – All of the key hardware elements being assembled for NASA’s new Orion spacecraft launching just under one year from now are nearing completion at the Kennedy Space Center (KSC) – at the same time as a crucial and successful hardware test in California this week helps ensure that the Exploration Flight Test-1 (EFT-1) vehicle will be ready for an on-time liftoff.
Orion is NASA’s first spaceship designed to carry human crews on long duration flights to deep space destinations beyond low Earth orbit, such as asteroids, the moon, Mars and beyond.
In a major construction milestone, Orion’s massive Service Module (SM) was hoisted out from the tooling stand where it was manufactured at the Operations and Checkout Building (O & C) at KSC and moved to the next assembly station where it will soon be mated to the spacecraft adapter cone.
The SM should be mated to the crew module (CM) by year’s end, Orion managers told Universe Today during my recent inspection tour of significant Orion hardware at KSC.
“We are working 24 hours a day, 7 days a week,” said Jules Schneider, Orion Project manager for Lockheed Martin at KSC, during an exclusive interview with Universe Today inside the Orion clean room at KSC. “We are moving fast!”
The three panels or fairings encapsulating a stand-in for Orion’s service module successfully detach during a test Nov. 6, 2013 at Lockheed Martin’s facility in Sunnyvale, Calif. Image Credit: Lockheed Martin
“We are bringing Orion to life. Lots of flight hardware has now been installed.”
And on the other side of the country, the Service Module design passed a key hurdle on Wednesday (Nov. 6) when the trio of large spacecraft panels that surround the SM were successfully jettisoned from the spacecraft during a systems test by Lockheed Martin that simulates what would happen during an actual flight several minutes after liftoff.
“Hardware separation events like this are absolutely critical to the mission and some of the more complicated things we do,” said Mark Geyer, Orion program manager at NASA’s Johnson Space Center in Houston. “We want to know we’ve got the design exactly right and that it can be counted on in space before we ever launch.”
Orion crew capsule, Service Module and 6 ton Launch Abort System (LAS) mock up stack inside the transfer aisle of the Vehicle Assembly Building (VAB) at the Kennedy Space Center (KSC) in Florida. Powerful quartet of LAS abort motors will fire in case of launch emergency to save astronauts lives. Credit: Ken Kremer/kenkremer.com
Lockheed Martin is the prime contractor for Orion and responsible for assembly, testing and delivery of the Orion EFT-1 spacecraft to NASA that’s slated for an unmanned test flight targeted to lift off from Cape Canaveral, Florida in September 2014.
The CM rests atop the SM similar to the Apollo Moon landing program architecture.
However in a significant difference from Apollo, the Orion fairings support half the weight of the crew module and the launch abort system during launch and ascent. The purpose is to improve performance by saving weight thus maximizing the vehicles size and capability.
The SM also provides in-space power, propulsion capability, attitude control, thermal control, water and air for the astronauts.
At Lockheed Martin’s Sunnyvale, California facility a team of engineers used a series of precisely-timed, explosive charges and mechanisms attached to the Orion’s protective fairing panels in a flight-like test to verify that the spacecraft can successfully and confidently jettison them as required during the ascent to orbit.
The trio of fairing panels protect the SM radiators and solar arrays from heat, wind and acoustics during ascent.
The three panels or fairings encapsulating a stand-in for Orion’s service module successfully detach during a test Nov. 6, 2013 at Lockheed Martin’s facility in Sunnyvale, Calif. Image Credit: Lockheed Martin
“This successful test provides the Orion team with the needed data to certify this new fairing design for Exploration Flight Test-1 (EFT-1) next year. The test also provides significant risk reduction for the fairing separation on future Orion manned missions,” said Lance Lininger, engineering lead for Lockheed Martin’s Orion mechanism systems in a statement.
This was the 2nd test of the fairing jettison system. During the first test in June, one of the three fairing panels did not completely detach due to an interference “when the top edge of the fairing came into contact with the adapter ring and kept it from rotating away and releasing from the spacecraft,” said NASA.
Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a crane moves the service module for the Orion spacecraft toward a lift station where it will be mated to the spacecraft adapter cone. Photo credit: NASA/Jim Grossmann
2013 has been an extremely busy and productive year for the Orion EFT-1 team.
“There are many significant Orion assembly events ongoing this year,” said Larry Price, Orion deputy program manager at Lockheed Martin, in an interview with Universe Today at Lockheed Space Systems in Denver.
“This includes the heat shield construction and attachment, power on, installing the plumbing for the environmental and reaction control system, completely outfitting the crew module, attached the tiles, building the service module and finally mating the crew and service modules (CM & SM),” Price told me.
Technicians work inside the Orion crew module being built at Kennedy Space Center to prepare it for its first power on. Turning the avionics system inside the capsule on for the first time marks a major milestone in Orion’s final year of preparations before its first mission, Exploration Flight Test 1 Credit: Lockheed Martin
The two-orbit, four- hour flight will lift the Orion spacecraft and its attached second stage to an orbital altitude of 3,600 miles, about 15 times higher than the International Space Station (ISS) – and farther than any human spacecraft has journeyed in 40 years.
A crater imaged by the Mars Reconnaissance Orbiter's HiRISE (High Resolution Imaging Science Experiment). Credit: NASA/JPL/University of Arizona
Stop what you’re doing, grab the nearest 3-D glasses (red/blue type) you have available and then pretend you’re hovering above Mars for a while. These are some of the latest images from the Mars Reconnaissance Orbiter, which has been cruising above the planet since 2006.
“Candidate Future Landing Site at Valley North of Jezero Crater”, imaged by the Mars Reconnaissance Orbiter’s HiRISE (High Resolution Imaging Science Experiment). Credit: NASA/JPL/University of Arizona“Fossae Source of Outflows,” a picture taken by Mars Reconnaissance Orbiter’s HiRISE (High Resolution Imaging Science Experiment). Credit: NASA/JPL/University of Arizona“Floor of East Candor Chasma,” a picture taken by the Mars Reconnaissance Orbiter’s HiRISE (High Resolution Imaging Science Experiment). Credit: NASA/JPL/University of Arizona“Knobs with bright layers in Noctis Labyrinthus”, a picture taken by the Mars Reconnaissance Orbiter’s HiRISE (High Resolution Imaging Science Experiment). Credit: NASA/JPL/University of Arizona
Former Canadian astronaut Chris Hadfield was on hand for the official circulation ceremony of Canada's new space-themed $5 bill on Nov. 7, 2013. The press conference took place in two locations; Hadfield was at the Canadian Space Agency headquarters near Montreal, Que. The red flower on his lapel is a poppy for Remembrance Day, a Nov. 11 commemoration of veterans. Credit: Bank of Canada (webcast/screenshot)
In Canada, “gimme five” could soon have a space connotation. Today the country announced it is preparing to put new polymer $5 bills into circulation that feature Canadian robotics and an astronaut.
At the official circulation ceremony near Montreal, Que. was none other than Canadian astronaut Chris Hadfield, who brought unprecedented social media attention to space through social media. The world was enchanted by his guitar playing and crying in space, but in space circles he also commands a lot of respect. The trilingual Hadfield visited two space stations, helped build the robotic Canadarm2 in space, and commanded the International Space Station, among other achievements.
His presence was appropriate, because the $5 bill has a lot of robotics on it. Canadarm2, Dextre and an astronaut are splashed across one face of the bill. “It reminds us that our dreams do not have a limit,” Hadfield said in French.
Canadarm2, Dextre and an unidentified astronaut on Canada’s new $5 bill. Credit: Bank of Canada
“It serves as a reminder to all Canadians of the dedication and hard work of so many people across the Canadian Space Agency and the space industry across Canada, and the scientists and engineers that make the design of these incredibly complex robots and getting them into space somehow easy,” Hadfield added in English. “Being involved in it is the real inspiration part. Who knows where such innovation can take us.”
The Bank of Canada first unveiled the new $5 and $10 bills in April, while Hadfield was at the helm of the station. Canada’s central banking authority is touting the new plasticized bill series as more durable than past cotton-based ones, with better counterfeit measures such as transparency. Polymer bills are available already in $20, $50 and $100 denominations.
Opposite to the space-themed side of the $5 bill is a picture of past prime minister Wilfrid Laurier. The new $10 bill features a train on one side and (as with the past iteration) John A. Macdonald, the first Canadian prime minister, on the other.
Hadfield himself has featured on both Canadian currency and stamps in the past: the Royal Mint of Canada issued two coins with him and Canadarm2 in 2006, and Hadfield was among several astronauts put on to Canadian stamps in 2003.
Canadian astronaut Chris Hadfield holds a version of the $5 bill on the International Space Station on April 30, 2013. Credit: Bank of Canada (webcast)
The 20-foot (6-meter) hole punched through the ice on Chebarkul Lake by a large fragment of the Chelyabinsk meteorite. Credit: AP
Security camera video showing the impact of the largest piece of the Chelyabinsk meteorite striking Lake Chebarkul during the Feb. 15, 2013 Russian fireball. Credit: Nikolaj Mel’nikov.
When I first watched this video of the half-ton Chelyabinsk meteorite crashing into Lake Chebarkul last Feb. 15 I didn’t see anything. But once you pay close attention, what you’ll see is nothing short of amazing. You’ll recall that a 20-foot (6 meter) hole appeared in the ice immediately after the fall. While no one witnessed the impact, a security camera caught the critical moment from the other side of the lake.
The video recently appeared in an online presentation by Peter Jenniskens, noted meteorite expert and senior research scientist at the SETI Institute. It was released as part of a paper and Powerpoint on the Chelyabinsk airburst. You can listen to Jenniskens’ presentation HERE.
Frame grab from the video showing the breakdown of the impact and resulting ice and snow cloud.
When you watch the video, focus your attention just to the left of what looks like an ice fishing shack at top center and use the handy frame grab above. In the slowed-down portion of the footage you’ll see a cloud of ice and snow blow up and quickly drift to the right of the shack seconds after impact. While blurry and small, it’s amazing good fortune we have a document of this fall.
Video of the recovery of the largest piece of the Chelyabinsk meteorite
Divers ultimately fished the 1/2 ton Chelyabinsk meteorite – the largest found so far – from the lake on Oct. 16. It measured 5 feet long (1.5 meter) and broke into three pieces as scientists hoisted it into a scale to weigh it.
As a return favor, the little piece of heaven broke the scale.
