‘Sail Rover’ Could Explore Hellish Venus

A concept for windsurfing on Venus from the NASA Innovative Advanced Concepts office. Credit: NASA

A windsailing rover could use the high speeds and hot temperatures of Venus to a robotic explorer’s advantage, according to an idea funded by NASA’s Innovative Advanced Concepts program.

The rover would not only be able to move around Venus, but would also have electronics inside able to withstand the temperatures of 450 degrees Celsius (840 degrees Fahrenheit).

The rover, which is nicknamed Zephyr, would spend most of its time on Venus doing analysis on the ground. Whenever the science team wants to move some distance, however, it would deploy a sail that could bring it across the surface. One vision sees it sailing for about 15 minutes a day for about a month.

Atmosphere of Venus. Credit: ESA
Artist’s conception of the atmosphere of Venus. Credit: ESA

“A sail rover would be extraordinary for Venus. The sail has only two moving parts-just to set the sail and set the steering position-and that doesn’t require a lot of power. There’s no power required to actually drive,” stated Geoffrey Landis, who is with NASA’s Glenn Research Center.

“The fundamental elements of a rover for Venus are not beyond the bounds of physics,” Landis added. “We could survive the furnace of Venus if we can come up with an innovative concept for a rover that can move on extremely low power levels.”

Landis has had many ideas for exploring Venus, including using a solar powered airplane and colonizing the planet using floating cities.

You can read more details about the windsurfing rover here. If this gets to the mission phase, this would represent the first time that any robot landed on Venus since the Soviet Venera landers; the last attempt was in the 1980s.

When do Black Holes Become Active? The Case of the Strangely-Shaped Galaxy Mrk 273

Mrk 273 as seen by the Hubble Space Telescope.

The Hubble image above shows a strange galaxy, known as Mrk 273.  The odd shape – including the infrared bright center and the long tail extending into space for 130 thousand light-years – is strongly indicative of a merger between galaxies.

Near-infrared observations have revealed a nucleus with multiple components, but for years the details of such a sight have remained obscured by dust. With further data from the Keck Telescope, based in Hawaii, astronomers have verified that this object is the result of a merger between galaxies, with the infrared bright center consisting of two active galactic nuclei – intensely luminous cores powered by supermassive black holes.

At the center of every single galaxy is a supermassive black hole. While the name sounds exciting, our supermassive black hole, Sgr A* is pretty quiescent.  But at the center of every early galaxy looms the opposite: an active galactic nuclei (AGN for short). There are plenty of AGN in the nearby Universe as well, but the question stands: how and when do these black holes become active?

In order to find the answer astronomers are looking at merging galaxies. When two galaxies collide, the supermassive black holes fall toward the center of the merged galaxy, resulting in a binary black hole system. At this stage they remain quiescent black holes, but are likely to become active soon.

“The accretion of material onto a quiescent black hole at the center of a galaxy will enable it to grow in size, leading to the event where the nucleus is “turned on” and becomes active,” Dr. Vivian U, lead author on the study, told Universe Today. “Since galaxy interaction provides means for gaseous material in the progenitor galaxies to lose angular momentum and funnels toward the center of the system, it is thought to play a role in triggering AGN.  However, it has been difficult to pinpoint exactly how and when in a merging system this triggering occurs.”

While it has been known that an AGN can “turn on” before the final coalescence of the two black holes, it is unknown as to when this will happen. Quite a few systems do not host dual AGN.  For those that do, we do not know whether synchronous ignition occurs or not.

Mrk 273 provides a powerful example to study. The team used near-infrared instruments on the Keck Telescope in order to probe past the dust.  Adaptive optics also removed the blurring affects caused by the Earth’s atmosphere, allowing for a much cleaner image – matching the Hubble Space Telescope, from the ground.

“The punch line is that Mrk 273, an advanced late-stage galaxy merger system, hosts two nuclei from the progenitor galaxies that have yet to fully coalesce,” explains Dr. U. The presence of two supermassive black holes can be easily discerned from the rapidly rotating gas disks that surround the two nuclei.

“Both nuclei have already been turned on as evidenced by collimated outflows (a typical AGN signature) that we observe” Dr. U told me. Such a high amount of energy released from both supermassive black holes suggests that Mrk 273 is a dual AGN system. These exciting results mark a crucial step in understanding how galaxy mergers may “turn on” a supermassive black hole.

The team has collected near-infrared data for a large sample of galaxy mergers at different merging states.  With the new data set, Dr. U aims “to understand how the nature of the nuclear star formation and AGN activity may change as a galaxy system progresses through the interaction.”

The results will be published in the Astrophysical Journal (preprint available here).

 

Flicker… A Bright New Method of Measuring Stellar Surface Gravity

A simple, yet elegant method of measuring the surface gravity of a star has just been discovered. These computations are important because they reveal stellar physical properties and evolutionary state – and that’s not all. The technique works equally well for estimating the size of hundreds of exoplanets. Developed by a team of astronomers and headed by Vanderbilt Professor of Physics and Astronomy, Keivan Stassun, this new technique measures a star’s “flicker”. Continue reading “Flicker… A Bright New Method of Measuring Stellar Surface Gravity”

Curiosity Conducts Science on the Go and Zooms to Stunning Mount Sharp

Curiosity Spies Mount Sharp - her primary destination. Curiosity will ascend mysterious Mount Sharp and investigate the sedimentary layers searching for clues to the history and habitability o the Red Planet of billions of years. This mosaic was assembled from Mastcam camera images taken on Sol 352 (Aug 2, 2013. Credit: NASA/JPL-Caltech/MSSS/ Marco Di Lorenzo/Ken Kremer

Curiosity Spies Mount Sharp – her primary destination. Curiosity will ascend mysterious Mount Sharp and investigate the sedimentary layers searching for clues to the history and habitability of the Red Planet over billions of years. But first she must safely trespass through the treacherous dark dunes fields. This mosaic was assembled from over 2 dozen Mastcam camera images taken on Sol 352 (Aug 2, 2013). Credit: NASA/JPL-Caltech/MSSS/ Marco Di Lorenzo/Ken Kremer
See the full mosaic below [/caption]

It’s never a dull moment for NASA’s Curiosity rover at T Plus 1 Year since touchdown on the Red Planet and T Minus 1 year to arriving at her primary target, the huge mountain overwhelming the center of the landing site inside Gale Crater.

Curiosity is literally and figuratively zooming in on stunningly beautiful and mysterious Mount Sharp (see our new mosaics above/below), her ultimate destination, while conducting ‘Science on the Go’ with her duo of chemistry labs – SAM and CheMin – and 8 other science instruments as she passes the 2 kilometer driving milestone today; Aug 20 !

“We are holding samples for drops to ChemMin and SAM when the science team is ready for it,” Jim Erickson, Curiosity Project Manager of NASA’s Jet Propulsion Laboratory (JPL), told Universe Today in an exclusive interview.

“Curiosity has landed in an ancient river or lake bed on Mars,” Jim Green, Director of NASA’s Planetary Science Division, told Universe Today.

So, those samples were altered by liquid Martian water – a prerequisite for life.

Curiosity Spies Mount Sharp - her primary destination. Curiosity will ascend mysterious Mount Sharp and investigate the sedimentary layers searching for clues to the history and habitability of the Red Planet over billions of years.  This mosaic was assembled from over 3 dozen Mastcam camera images taken on Sol 352 (Aug 2, 2013. Credit: NASA/JPL-Caltech/MSSS/ Marco Di Lorenzo/Ken Kremer
Curiosity Spies Mount Sharp – her primary destination. Curiosity will ascend mysterious Mount Sharp and investigate the sedimentary layers searching for clues to the history and habitability of the Red Planet over billions of years. But first she must safely trespass through the treacherous dark dunes fields. This mosaic was assembled from over 3 dozen Mastcam camera images taken on Sol 352 (Aug 2, 2013.
Credit: NASA/JPL-Caltech/MSSS/ Marco Di Lorenzo/Ken Kremer-kenkremer.com

In fact the car sized rover has saved samples from both the ‘John Klein’ and ‘Cumberland’ drill sites collected previously in the ‘Yellowknife Bay’ area for analysis by the miniaturized labs in the rovers belly -when the time is right.

“Curiosity has stored a Cumberland sample and still has a John Klein sample on board for future use,” Erickson explained.

And that time has now arrived!

“We have put a sample from the Cumberland drill hole into SAM for more isotopic measurements,” reported science team member John Bridges in a blog update on Sol 363, Aug. 14, 2013.

“The sample had been cached within the robotic arm’s turret.”

Curiosity is multitasking – conducting increasingly frequent traverses across the relatively smooth floor of Gale Crater while running research experiments for her science handlers back here on Earth.

NASA’s Curiosity rover make tracks to Mount Sharp (at left) across the floor of Gale Crater. The rover paused to image the windblown ripple at right, below the hazy crater rim. The wheel tracks are about eight  feet apart. This panoramic mosaic was assembled from a dozen navcam camera images taken on Sol 354 (Aug 4, 2013. Credit: NASA/JPL-Caltech/Ken Kremer Marco Di Lorenzo
NASA’s Curiosity rover make tracks to Mount Sharp (at left) across the floor of Gale Crater. The rover paused to image the windblown ripple at right, below the hazy crater rim. The wheel tracks are about eight feet apart. This panoramic mosaic was assembled from a dozen navcam camera images taken on Sol 354 (Aug 4, 2013). Credit: NASA/JPL-Caltech/Ken Kremer/Marco Di Lorenzo

She’s captured stunning new views of Mount Sharp – rising 5 km (3 miles) high into the sky – and movies of Mars tiny pair of transiting moons while ingesting new portions of the drilled rock samples acquired earlier this year.

Here’s our video compilation of Phobos and Deimos transiting on Aug 1, 2013

Video caption: Transit of Phobos in front of Deimos, taken by MSL right MastCam imager on Sol 351 around 3:12 AM local time (Aug 1, 2013, 8:42 UTC); 16 original frames + 14 interpolated (5x speed-up). Credit: NASA/JPL-Caltech/MSSS/ Marco Di Lorenzo/Ken Kremer

The sample analysis is still in progress.

“The SAM data have not all been received yet,” wrote science team member Ken Herkenhoff in a blog update.

Earlier analysis of sample portions from both ‘John Klein’ and ‘Cumberland’ revealed that the Yellowknife Bay area on Mars possesses the key mineral ingredients proving that Red Planet was once habitable and could have sustained simple microbial life forms.

The scientists are seeking further evidence and have yet to detect organic molecules – which are the building blocks of life as we know it.

This time lapse mosaic shows Curiosity maneuvering her robotic arm to drill into her 2nd   martian rock target named “Cumberland” to collect powdery Martian material on May 19, 2013 (Sol 279) for analysis by her onboard chemistry labs; SAM & Chemin. The photomosaic was stitched from raw images captured by the navcam cameras on May 14 & May 19 (Sols 274 & 279).  Credit: NASA/JPL-Caltech/Ken Kremer/Marco Di Lorenzo
This time lapse mosaic shows Curiosity maneuvering her robotic arm to drill into her 2nd martian rock target named “Cumberland” to collect powdery Martian material on May 19, 2013 (Sol 279) for analysis by her onboard chemistry labs; SAM & Chemin- see 3 inlet ports lower left. The photomosaic was stitched from raw images captured by the navcam cameras on May 14 & May 19 (Sols 274 & 279). Credit: NASA/JPL-Caltech/Ken Kremer/Marco Di Lorenzo

Yellowknife Bay resembles a dried out river bed where liquid water once flowed eons ago when the Red Planet was far warmer and wetter than today.

As the 1 ton robot ascends Mount Sharp, she will examine sedimentary layers layed down on ancient Mars over hundreds of millions and perhaps billions of years of past history and habitability.

And just as the rover was celebrating 1 year on Mars on Aug 5/6, she found an intriguing sand dune on Sol 354. See our mosaic

“The rover paused to take images of its tracks after crossing a windblown ripple,” Herkenhoff reported.

As the six wheeled rover approaches Mount Sharp over the next year, she will eventually encounter increasing treacherous dunes that she must cross before beginning her mountain climbing foray.

As of today, Sol 369 (Aug. 20) Curiosity has broken through the 2 kilometer driving mark with a new 70 meter drive, snapped over 75,000 images and fired over 75,000 laser shots.

Mount Sharp is about 8 kilometers (5 miles) distant as the Martian crow flies.

How long will the journey to Mount Sharp require?

“Perhaps about a year,” Erickson told me. “We are trying to make that significantly faster by bringing autonav [autonomous navigation software] online.”

“That will help. But how much it helps really depends on the terrain.”

So far so good.

Meanwhile NASA’s next Mars orbiter called MAVEN (for Mars Atmosphere and Volatile Evolution), recently arrived at the Kennedy Space Center after a cross country flight.

Kennedy technicians are completing assembly and check out preparations for MAVEN’s blastoff to the Red Planet on Nov. 18 from Florida atop an Atlas V rocket similar to the one that launched Curiosity nearly 2 years ago.

And I’ll be at Kennedy to report up close on MAVEN’s launch.

Stay tuned.

Ken Kremer

WISE Spacecraft Re-Activated to Hunt for Potentially Hazardous Asteroids

WISE
Wide-field Infrared Survey Explorer (WISE) spacecraft. Credit: NASA.

A hibernating spacecraft has been called back into service. The WISE (Wide-field Infrared Survey Explorer”) spacecraft that has been sleeping in a polar orbit around Earth for two years will be turned back on next month to hunt for more potentially hazardous asteroids, and perhaps search for an asteroid that NASA could capture and explore in the future.

“The WISE mission achieved its mission’s goals and as NEOWISE extended the science even further in its survey of asteroids. NASA is now extending that record of success, which will enhance our ability to find potentially hazardous asteroids, and support the new asteroid initiative,” said John Grunsfeld, NASA’s associate administrator for science. “Reactivating WISE is an excellent example of how we are leveraging existing capabilities across the agency to achieve our goal.”

WISE originally was launched in December 2009 and scanned the entire celestial sky in infrared light about 1.5 times, searching for the coolest stars, the universe’s most luminous galaxies and some of the darkest near-Earth asteroids and comets. It captured more than 2.7 million images of objects in space, ranging from faraway galaxies to asteroids and comets close to Earth.

However, in early October 2010, after completing its prime science mission, the spacecraft ran out of the frozen coolant that keeps its instrumentation cold. But two of its four infrared cameras remained operational, which were still optimal for asteroid hunting, so NASA extended the NEOWISE portion of the WISE mission by four months, with the primary purpose of hunting for more asteroids and comets, and to finish one complete scan of the main asteroid belt.

The NEOWISE mission completed a full sweep of the main asteroid belt, and during 2010, NEOWISE observed about 158,000 rocky bodies out of approximately 600,000 known objects. Discoveries included 21 comets, more than 34,000 asteroids in the main belt between Mars and Jupiter, and 135 near-Earth objects.

“The data collected by NEOWISE two years ago have proven to be a gold mine for the discovery and characterization of the NEO population,” said Lindley Johnson, NASA’s NEOWISE program executive in Washington. “It is important that we accumulate as much of this type of data as possible while the WISE spacecraft remains a viable asset.”

Now WISE will again search for asteroids with a new extra-extended three year mission to search for more PHAs as well as suitable asteroids for future human exploration missions.

Concept of NASA spacecraft with Asteroid capture mechanism deployed to redirect a small space rock to a stable lunar orbit for later study by astronauts aboard Orion crew capsule. Credit: NASA.
Concept of NASA spacecraft with Asteroid capture mechanism deployed to redirect a small space rock to a stable lunar orbit for later study by astronauts aboard Orion crew capsule. Credit: NASA.

NASA said they anticipate WISE will use its 16-inch (40-centimeter) telescope and infrared cameras to discover about 150 previously unknown NEOs and characterize the size, albedo and thermal properties of about 2,000 others — including some of which could be candidates for the agency’s recently announced asteroid initiative.

“The team is ready and after a quick checkout, we’re going to hit the ground running,” said Amy Mainzer, NEOWISE principal investigator at NASA’s Jet Propulsion Laboratory in Pasadena, Calif. “NEOWISE not only gives us a better understanding of the asteroids and comets we study directly, but it will help us refine our concepts and mission operation plans for future, space-based near-Earth object cataloging missions.”

Source: NASA

Now’s Your Big Chance To Use NASA’s Shuttle Launcher Platforms

Parts of a Rocket
Atlantis begins the slow journey to Launch Pad 39A from the Vehicle Assembly Building (VAB) in preparation for the launch of STS-79 in 16 September 1996. This dramatic view looking directly down onto the shuttle stack atop the Mobile Launcher Platform (MLP) and crawler-transporter was taken from the VAB roof approximately 525 feet (160 meters) above the ground. In view are the Orbiter, orange External Tank and twin white Solid Rocket Boosters. Credit: NASA

If you’ve got a new use for the mobile launcher platforms NASA used for the shuttle program, the agency is all ears.

NASA invited government and commercial entities to submit their ideas for the platforms, which used to ferry the space shuttles and the Apollo rockets from the Vehicle Assembly Building to their launch pads.

Mobile launcher platform
Space shuttle Discovery on board one of the mobile launcher platforms. Credit: NASA

The ideal for NASA is to make them available for commercial launch activity. “Interested parties are requested to provide the following … estimated annual launch manifest, plans for retrofitting, storing, transporting, estimated schedule for acquiring use of the MLP(s), and the length of time the MLP(s) would be required for a particular activity,” the agency stated in a request for information.

Other options for the platforms could include modifying them for use in oil rigs, artificial reefs or even museum exhibits. Deconstruction is also being considered.

Each of the three platforms is two storeys tall, weigh 8.2 million pounds, with a platform of about 160 feet by 135 feet.

Responses are due Sept. 6 and you can check out the RFI here.

Earthlings Wave at Saturn as Cassini Images Us

Earth Waves at Cassini on July 19, 2013- From more than 40 countries and 30 U.S. states, people around the world shared more than 1,400 images of themselves as part of the Wave at Saturn event organized by NASA's Cassini mission on July 19, 2013. The Cassini team created this image collage as a tribute to the people of Earth Credit: NASA/JPL-Caltech/People of Earth See link below to the absolutely gigantic full resolution version

Earth Waves at Saturn and Cassini on July 19, 2013
From more than 40 countries and 30 U.S. states, people around the world shared more than 1,400 images of themselves as part of the Wave at Saturn event organized by NASA’s Cassini mission on July 19, 2013. The Cassini team created this image collage as a tribute to the people of Earth
Credit: NASA/JPL-Caltech/People of Earth
See link below to the absolutely gigantic full resolution version [/caption]

On July 19, millions of Earthlings worldwide participated in NASA’s ‘Wave at Saturn’ campaign as the NASA Cassini Saturn orbiter turned about and imaged all of us.

Earthlings from 40 countries and 30 U.S. states heeded NASA’s call to photograph themselves while smiling and waving at Saturn and Cassini across 1 billion miles of interplanetary space and shared over 1400 images.

The results of all those images has now been assembled into a fabulous collage in the shape of our planet and released today (Aug. 21) by NASA and the Cassini team as a tribute to the People of Earth.

“Did you wave at Saturn and send us your photo? Then here’s looking at you!” NASA announced on the Cassini Facebook page.

This event was the first time that the citizens of Earth knew in advance that a distant interplanetary spacecraft was photographing portraits of our home planet and our Moon. NASA invited everyone to participate.

Photos flooded into NASA via Twitter, Facebook, Flickr, Instagram, Google+ and email.

Click here for the full resolution version. But be forewarned – it weighs in at over 26 MB and it’s far too big to post here.

The Day the Earth Smiled: Sneak Preview In this rare image taken on July 19, 2013, the wide-angle camera on NASA's Cassini spacecraft has captured Saturn's rings and our planet Earth and its moon in the same frame. Image Credit: NASA/JPL-Caltech/Space Science Institute
The Day the Earth Smiled: Sneak Preview
In this rare image taken on July 19, 2013, the wide-angle camera on NASA’s Cassini spacecraft has captured Saturn’s rings and our planet Earth and its moon in the same frame. Image Credit: NASA/JPL-Caltech/Space Science Institute

“Thanks to all of you, near and far, old and young, who joined the Cassini mission in marking the first time inhabitants of Earth had advance notice that our picture was being taken from interplanetary distances,” said Linda Spilker, Cassini project scientist at NASA’s Jet Propulsion Laboratory, Pasadena, Calif, in a statement.

“While Earth is too small in the images Cassini obtained to distinguish any individual human beings, the mission has put together this collage so that we can celebrate all your waving hands, uplifted paws, smiling faces and artwork.”

The Cassini imaging science team is still assembling the hundreds of images of Saturn and Earth snapped by the spacecraft as we were waving, to create individual color composites and a panoramic view of the ‘pale blue dot’ and the entire Saturnian system.

To capture all of Saturn and its wide swath of rings, Cassini’s wide angle camera snapped a mosaic of 33 footprints on July 19, 2013.

“At each footprint, images were taken in different spectral filters for a total of 323 images,” says Carolyn Porco, Cassini Imaging Team leader, Space Science Institute in Boulder, Colo.

Cassini took the pictures of Earth from a distance of about 898 million miles (1.44 billion kilometers) away from the home to every human being that has ever lived.

Here is our partial version of Cassini’s mosaic.

Partial context mosaic of the Earth and Saturn taken by NASA’s Cassini orbiter on July 19, 2013.   This mosaic was assembled from five wide angle camera raw images.  Credit: NASA/JPL-Caltech/Ken Kremer/Marco Di Lorenzo
Partial context mosaic of the Earth and Saturn taken by NASA’s Cassini orbiter on July 19, 2013. This mosaic was assembled from five Cassini wide angle camera raw images and offers a sneak peek of the complete panorama. Earth at lower right. Credit: NASA/JPL-Caltech/Ken Kremer/Marco Di Lorenzo

Cassini was launched from Florida in 1997.

It achieved orbit at Saturn in 2004 and has transmitted breathtaking images and science that revolutionized our understanding of the Saturnian system.

The mission is scheduled to continue until 2017 when it will commit a suicide death dive into the humongous gas giant.

Coincidentally, the first humans (Neil Armstrong and Buzz Aldrin) set foot on the Moon 44 years ago nearly to the day of Cassini’s Earth-Moon portrait on July 20, 1969 aboard Apollo 11.

And likewise on July 19, 2013, billionaire space enthusiast Jeff Bezos announced that his dive teams had recovered components of an Apollo 11 first stage F-1 rocket engine from the Saturn V moon rocket that propelled the first humans to the Moon.

Ken Kremer

JPL Waves at Saturn As NASA's Cassini spacecraft turned its imaging cameras to Earth, scientists, engineers and visitors at NASA's Jet Propulsion Laboratory, Pasadena, Calif., gathered to wave at our robotic photographer in the Saturn system on July 19, 2013. Credit: NASA/JPL-Caltech
JPL Waves at Saturn As NASA’s Cassini spacecraft turned its imaging cameras to Earth, scientists, engineers and visitors at NASA’s Jet Propulsion Laboratory, Pasadena, Calif., gathered to wave at our robotic photographer in the Saturn system on July 19, 2013. Credit: NASA/JPL-Caltech

Geek Out! How to Build Your Own Nova Delphini Light Curve

Nova Delphini (center) continues to shine brightly enough to see in binoculars and with the naked eye once the moon's out of the sky. While we still don't know its distance, novae like this one are typically between 1,000 to 1,500 light years away. Credit: John Chumack

And now for something to appeal to your inner geek. Or, if  you’re like me, your outer geek. Many of you have been watching the new nova in Delphinus with the naked eye and binoculars since it burst onto the scene early Aug. 14. In a moment I’ll show how to turn your observations into a cool representation of the nova’s behavior over time.

Updated Nova Delphini 2013 chart using the latest visual magnitudes from the AAVSO showing stars around the nova to magnitude 7.1. Stellarium
Updated Nova Delphini 2013 chart using the latest visual magnitudes from the AAVSO showing stars around the nova to magnitude 7.1. Click for larger version. Stellarium

Where I live in northern Minnesota, we’ve had a lucky run of clear nights since the outburst began. Each night I’ve gone out with my 8×40 binoculars and star chart to estimate the nova’s brightness. The procedure is easy and straightforward. You find comparison stars near the nova with known magnitudes, then select one a little brighter and one a little fainter and interpolate between the two to arrive at the nova’s magnitude.

Estimating a star's magnitude by creating a sliding scale in your mind's eye between a stars that bracket the nova in brightness. Illustration: Bob King
Estimating a star’s magnitude by creating a sliding scale in your mind’s eye between stars that bracket the nova in brightness. Illustration: Bob King

For example, if the nova’s brightness lies halfway between the magnitude 4.8 and 5.7 stars it’s about magnitude 5.3. The next night you might notice it’s not exactly halfway but a tad brighter or closer to the 4.8 star. Then you’d measure 5.2. Remember that the smaller the number, the brighter the object. I’ve found that defocusing the stars into disks makes it a bit easier to estimate these differences.

In time, you’ll come up with a list of magnitudes or brightness estimates for Nova Delphini. Here’s mine to date:

* Aug. 14: 5.8
* Aug. 15: 4.9
* Aug. 16: 5.0
* Aug. 17: 5.0
* Aug. 18: 5.0
* Aug. 19: 5.2
* Aug. 20: 5.5

Template you can use to plot your own estimates of Nova Delphini 2013's night by night brightness through Sept. 11. Click for larger version.
Template you can use to plot your own estimates of Nova Delphini 2013’s night by night brightness through Sept. 11. Click for larger version.

So far just numbers, but there’s a way to turn this into a satisfying visual picture of the nova’s long-term behavior. Graph it! That’s what astronomers do, and they call it a light curve.

I dug around and came up with this very basic template. The horizontal or x-axis measures time in days, the vertical or y-axis plots the nova’s brightness measured in magnitudes. You can either right-click and save the image above or grab the higher-res version HERE.

I plotted my own brightness estimates of the nova using Photoshop Elements. You can do it on computer or with paper and pencil.
I plotted my own brightness estimates of the nova using Photoshop Elements. You can do it on computer or with paper and pencil.

Next, print out a copy and lay in your data points with pencil and ruler the old-fashioned way or use an imaging program like Photoshop or Paint to do the same on the computer. I use a very basic version of Photoshop Elements to plot my observations. Once your observations are marked, connect them to build your light curve.

Connecting the dots, we can start to see how the nova behaves over time. The sudden jump from obscurity as well as the brief plateau before fading are obvious.
Connecting the dots, we can start to see how the nova behaves over time. The sudden jump from obscurity as well as the brief plateau before fading are obvious.

Right away you’ll notice a few interesting things. The nova shot up from approximately 17th magnitude on Aug. 13 to 6.8 on Aug. 14 – a leap of more than 10 magnitudes, which translates to a nearly 10,000 fold increase in brightness.

I wasn’t able to see the Nova Del top out at around 4.4 magnitude – that happened when I was asleep the next morning – but I did catch it at 4.9. The next few days the nova hits a plateau followed by what appears for the moment like a steady decline in brightness. Will it rocket back up or continue to fade? That’s for you and your binoculars to find out the next clear night.

Official AAVSO light curve to date for Nova Delphini 2013 created using their light curve generator. The plot includes observations from many observers. Copyright: AAVSO
AAVSO light curve to date for Nova Delphini 2013 created using their light curve generator. The plot includes observations from many observers. Copyright: AAVSO

If you’d like to take the next step and contribute your observations for scientific use, head over to the AAVSO (American Assn. of Variable Star Observers) and become a member. Even if you don’t sign up, access to data, charts and light curves of novae and other variable stars is completely free.

Nova Sagittarii 2012 light curve. Notice the occasional plateaus as well as bumps in brightness as it faded back to minimum light. Credit: NASA
Nova Sagittarii 2012 light curve. Notice the occasional plateaus as well as bumps in brightness as it faded back to minimum light. Credit: NASA

I get a kick out of comparing my basic light curves with those created with thousands of observations contributed by hundreds of observers. The basic AAVSO curve looks all scrunched up for the moment because their time scale (x-axis) is much longer term than in my simple example. But guess what? You can change the scale using their light curve generator and open up the view a little more as I did in the curve above.

Light curve of V2467 Cygni, a nova that appeared in Cygnus in 2007. Credit: AAVSO
Light curve of V2467 Cygni, a nova that appeared in Cygnus in 2007. Credit: AAVSO

Here are a couple other typical novae light curves. By the time you’re done looking at the examples here as well as creating your own, you’ll gain a familiarity that may surprise you. Not only will be able to interpret trends in Nova Delphini’s brightness, but you’ll better understand the behavior of other variable stars at a glance. It’s as easy as connecting the dots.

 

Don’t Panic: How Space Emergency Astronaut Training Works

Safety in spaceflight comes from working the procedures in training so often that responses become automatic, says German astronaut Alexander Gerst, shown here during spacewalk training. Credit: NASA

Routines. They tell you when to get up in the morning, what to do at your day job and how to handle myriad tasks ranging from house cleaning to using a computer. Memorizing these procedures makes it a lot easier to handle things that come up in life.

In space, establishing routines is even more important because they will help guide your thinking during an emergency. That’s why astronauts spend thousands of hours learning, simulating and memorizing before heading up to space.

European Space Agency astronaut Alexander Gerst, who will fly to the International Space Station in 2014 during Expedition 40/41, gave Universe Today some insight on how it’s done.

Why train so often? According to Gerst, practicing an emergency procedure on the ground makes it easier to think clearly during a situation up in space. An astronaut’s reaction to any problem on station — a fire, a depressurization, toxic air — is to begin with the procedures. “They sink in and become a memorized response or a natural reaction,” he said. In a fire situation, for example, “Immediately when you hear the sound of the alarm, I will grab the nearest gas mask and the nearest emergency book and head to our control post, which is part of the emergency response.” (Chris Cassidy, a former Navy SEAL on station right now, had more to say to Universe Today in March about “muscle memory” during emergencies.)

European Space Agency astronauts Alexander Gerst (left) and Samantha Cristoforetti in Russian Orlan spacesuits during training in 2012. Credit: GCTC
European Space Agency astronauts Alexander Gerst (left) and Samantha Cristoforetti in Russian Orlan spacesuits during training in 2012. Credit: GCTC

What’s the biggest challenge? The complexity of the station. The American and Russian sides have different procedures and different equipment. There are three types of gas masks on station, for example, and three kinds of fire extinguishing systems. (According to Gerst, all but the most stubborn fires on station are extinguished after cutting ventilation and electricity to the affected area.) To address the complexity, the astronauts spend hours in the classroom discussing what to look for in the fire sensors, pressure sensors, ammonia sensors and other parts of the vehicle. The signatures look different for depressurizations, fires and other conditions in space and it’s key to know what they mean at a glance.

What happens during a simulation? After discussing what actions to take, it’s time to play them out. “We don’t light our modules on fire, but the trainers are creative in creating that [emergency] condition,” Gerst said. Sometimes smoke machines will be used during a fire simulation, for example, or the astronauts will simply be informed by instructors that there is a fire in a section of the station. As the astronauts go through the procedures, trainers keep an eye on them and give feedback. In more complex situations, 10 to 20 flight controllers can join in to simulate communications with Mission Control in Houston or its equivalent in Russia.

ESA astronaut Alexander Gerst (left) and NASA astronaut Gregory Reid Wiseman (middle) during training at NASA's Johnson Space Center. Credit: ESA–S. Corvaja
ESA astronaut Alexander Gerst (left) and NASA astronaut Gregory Reid Wiseman (middle) during training at NASA’s Johnson Space Center. Credit: ESA–S. Corvaja

What about dealing with emergencies in a smaller spacecraft? Astronauts can spend anywhere from hours to days on a Russian Soyuz getting to and from the station. If there’s a fire on board, the three people squashed inside the capsule wouldn’t have much room to deploy fire extinguishers. The response is essentially for astronauts to slam shut the visors on their spacesuits and vent the spacecraft. During a depressurization, the procedure is also to close the visor. “You don’t even have to get out of your seat to deal with the emergency, which makes it quite different,” Gerst said.

What about emergencies during a spacewalk? Astronauts spend hundreds of hours inside the Neutral Buoyancy Laboratory in Houston, a huge pool with a mockup of most of the International Space Station inside. They practice spacewalk procedures such as how to bring an unconscious crew member back to the airlock, or what to do if air leaks out of a spacesuit. Gerst credits this sort of training for helping out during a recent incident involving fellow ESA astronaut Luca Parmitano. In July, emergency procedures kicked in for real when Parmitano’s spacesuit sprung a water leak during a spacewalk. In a nutshell, the crew worked to bring Parmitano back inside as quickly as possible, which led to a safe (but early) end to the work. (Read Parmitano’s nail-biting first-hand account of the incident here.)

What’s the big takeaway? Gerst emphasizes that emergency training is a “huge topic”. He and Reid Wiseman recently got checked out for emergency procedures on the United States side of the station, only to fly to Moscow and then have to do the same thing for the Russian side in mid-August. And there’s other training to do as well — another huge topic is medical emergencies , which Gerst practiced in a German hospital in July.