Universe Today

July 11, 2013April 26, 2016 by David Dickinson

How to Spot and Track Satellites

A 10 second exposure of a bright pass of the International Space Station. (Photo by Author).

It’s a question we get all the time.

Watch the sky closely in the dawn or dusk hours, and you’ll likely see a moving “star” or two sliding by. These are satellites, or “artificial moons” placed in low Earth orbit. These shine via reflected sunlight as they pass hundreds of kilometres overhead.

Many folks are unaware that you can see satellites with the naked eye. I always make an effort to watch for these during public star parties and point them out. A bright pass of the International Space Station if often as memorable as anything that can be seen through the eyepiece. But after this revelation, “the question” soon follows- “What satellite is that?”

Welcome to the wonderful and highly addictive world of satellite tracking. Ground observers have been watching the skies since Sputnik 1 and the first satellite launch in October 1957. Armies of dedicated volunteers even participated in tracking the early launches of the Space Age with Operation Moonwatch.

Depiction of the apparent motion of a typical satellite overhead with respect to the observer. (Graphic created by author).

The Internet has offered a wealth of information for satellite hunters. Every time I write about “how to spot the ISS,” someone amazes me with yet another new tracker App that I hadn’t heard of. One of my favorites is still Heavens-Above. It’s strange to think that we’ve been visiting this outstanding website daily for a decade and a half now. Heavens-Above specializes in satellites, and will show you a quick listing of passes for brighter satellites once configured with your location. A nifty “quick check” for possibly resolving a mystery satellite is their link for “Daily Predictions for brighter satellites” Which will generate a list of visible passes by time.

Screenshot of a typical list of bright satellite passes from Heavens-Above. — Screenshot of a typical list of bright satellite passes from Heavens-Above filtered by brightness, time and location .

Looking at the time, direction, and brightness of a pass is crucial to satellite identification. No equipment is needed to start the hunt for satellites tonight, just a working set of eyes and information. We sometimes use a set of Canon image-stabilized 15x 45 binoculars to hunt for satellites too faint to see with the naked eye. We’ve seen the “Tool Bag” lost during an ISS EVA a few years back, as well as such “living relics” of the early Space Age as Canada’s first satellite Alloutte-1, and the Vanguards (Yes, they’re STILL up there!) using binocs.

A comparision of typical satellite orbits. (Credit — A comparison of typical satellite orbits. (Credit: Cmglee, Geo Swan graphic under a Creative Commons Attribution -Share Alike 3.0 unported license).

The trick to catching fainter satellites such as these is to “ambush” them. You’ll need to note the precise time that the selected satellite is going to pass near a bright star. Clicking on a selected satellite pass in Heavens-Above will give you a local sky chart with a time-marked path. I use a short wave portable AM radio tuned to WWV out of Fort Collins, Colorado for an accurate audible time signal. Just sit back, listen to the radio call out the time, and watch for the satellite to pass through the field of view near the target star.

Another great site for more advanced trackers is CALSky. Like Heavens-Above, CALSky will give you a customized list for satellite passes over your location. One cool extra feature on CALSky is the ability to set alerts for passes of the ISS near bright planets or transiting the Sun or Moon. These are difficult events to capture, but worth it!

The International Space Station transiting the Moon as captured by Mike Weasner from Cassiopeia Observatory in Arizona.

A great deal of what’s up there is space junk in the form of discarded hardware. Many satellites are on looping elliptical orbits, only visible to the naked eye when they are near perigee. Many satellites are located out at geosynchronous or geostationary orbits 35,786 kilometres distant and are invisible to the naked eye all together. These will often show up as streaks in astrophotos. An area notorious for geosynchronous satellites exists near the direction of M42 or Orion Nebula. During certain times of year, satellites can be seen nearby, nodding slowly north to south and back again. Around the March and September equinox seasons, geostationary satellites can be eclipsed by the shadow of the Earth. This can also cause communications difficulties, as many geo-sats also lie sunward as seen from the Earth around these times of year.

Probably one of the simplest satellite trackers for casual users is Space Weather’s Satellite Flybys page. North American users simply need to enter a postal code (worldwide users can track satellites via entering “country-state-city”) and a list of passes for your location is generated.

It’s a basic truism of satellite tracking that “aircraft blink; satellites don’t”. Know, we’re going to present an exception to this rule.

Some satellites will flash rhythmically due to a tumbling motion. This can be pretty dramatic to see. What you’re seeing is an expended booster, a cylinder tumbling due to atmospheric drag end-over-end. Some satellites can flash or flare briefly due to sunlight glinting off of reflective surfaces just right. Hubble, the ISS and the late NanoSail D2 can flare if conditions are just right.

The most dramatic of these are Iridium flares. The Iridium constellation consists of 66 active satellites used for satellite phone coverage in low-Earth orbit. When one of their three refrigerator-sized antennas catch the Sun just right, they can flare up to magnitude -8, or 40 times brighter than Venus. CALSky and Heavens-Above will also predict these events for your location.

Didn’t see a predicted satellite pass? Light pollution or bright twilight skies might be to blame. Keep in mind, passes lower to the horizon also fall prey to atmospheric extinction, as you’re looking through a thicker layer of the air than straight overhead. Some satellites such as the ISS or the USAF’s X-37B spy space plane even periodically boost or modify their orbits, throwing online prediction platforms off for a time.

More advanced satellite trackers will want to check out Celestrak and SAT-Flare Tracker 3D.

A screenshot example of TLE's for the ISS & Tiangong-1 from Celestrak. — A screenshot example of TLE’s for the ISS & Tiangong-1 from Celestrak.

I use a free tracking platform created by Sebastian Stoff known as Orbitron. Orbitron lets you set your observing location and tailor your view for what’s currently over head. You can run simulations and even filter for “visual only” passes, another plus. I also like Orbitron’s ability to run as a stand-alone system in the field, sans Internet connection. Just remember, for it to work properly, you’ll need to periodically update the .txt file containing the Two-Line Element (TLE) sets. TLE’s are data element sets that describe the orbital elements of a satellite. Cut and paste TLEs are available from Heavens-Above and Celestrak.

Orbitron screenshot for visible satellites using 'radar' mode... there's lots up there! (Credit: Orbitron). — Orbitron screenshot for visible satellites using ‘radar’ mode… there’s lots up there! (Credit: Orbitron).

For serious users, NORAD’s Space-Track is the best site for up-to-date TLEs. Space-Track requires a login and user agreement to access, but is available to satellite spotters and educators as a valuable resource. Space-Track also hosts a table of upcoming reentries, as does the Aerospace Corporation’s Center for Orbital & Reentry Debris Studies.

The SeeSat-L mailing list is also an excellent source of discussion among satellite trackers worldwide. Increasingly, this discussion is also moving over to Twitter, which is ideal for following swiftly evolving action in orbit. @Twisst, created by Jaap Meijers,will even Tweet you prior to an ISS pass!

And there’s always something new or strange in the sky for the observant. Satellites such as those used in the Naval Ocean Surveillance System (NOSS) were launched in groups, and are eerie to watch as they move in formations of 2 or 3 across the sky. These are difficult to catch, and all three of our sightings thus far of a NOSS pair have been surreptitious. And we’ve only had the camera ready to swing into action once to nab a NOSS pair;

A NOSS pair captured by the author. The multi-colored trail bisecting the path is an aircraft. Note a bit of "jitter" at the beginning of the exposure- I had to swing the camera into action quickly! — A NOSS pair captured by the author. The multi-colored trail to the left of the path is an aircraft. Note a bit of “jitter” at the beginning of the exposure- I had to swing the camera into action quickly!

Another bizarre satellite to catch in action is known as the Cloud-Aerosol LiDAR & Infrared Pathfinder Satellite for Observations, or CALIPSO. Part of the “afternoon A-Train” of sun-synchronous Earth observing satellites, you can catch the green LiDAR flashes of CALIPSO from the ground with careful planning, just as Gregg Hendry did in 2008-2009:

A CALIPSO LIDAR pass imaged by Gregg Hendry in 2008. My Hendry mentions that, "The hollow nature of the spots is likely due to some spherical aberration in the camera lens coupled with imperfect focus and is not representative of the laser beam's optical quality." — A CALIPSO LiDAR pass imaged by Gregg Hendry in 2008. My Hendry mentions that, “The hollow nature of the spots is likely due to some spherical aberration in the camera lens coupled with imperfect focus, and is not representative of the laser beam’s optical quality.” (Credit: Gregg Hendry, used with permission).

NASA even publishes a prediction table for CALIPSO lidar passes. I wonder how many UFO sightings CALIPSO has generated?

Artist's depiction of the A-Train constellation of Earth-Observing satellites. (Credit: NASA). — Artist’s depiction of the A-Train constellation of Earth-Observing satellites. (Credit: NASA).

And speaking of photography, it’s easy to catch a bright pass such as the ISS on camera. Shooting a satellite pass with a wide field is similar to shooting star trails; just leave the shutter open for 10-60 seconds with a tripod mounted camera. Modern DSLRs allow you to do several test exposures prior to the pass, to get the ISO, f/stop, and shutter speed calibrated to local sky conditions.

You can even image the ISS through a telescope. Several sophisticated rigs exist to accurately track and image the space station through a scope, or you could use our decidedly low-tech but effective hand-guided method;

And that’s a brief overview of the exciting world of sat-spotting… let us know of your tales of triumph and tragedy as you sleuth out what’s going on overhead!

July 10, 2013December 23, 2015 by Nancy Atkinson

New Horizons: I Spy Pluto and Charon!

New Horizons LOng Range Reconnaissance Imager (LORRI) composite image showing the detection of Pluto’s largest moon, Charon, cleanly separated from Pluto itself. (Credit: NASA/Johns Hopkins University Applied Physics Laboratory/Southwest Research Institute)

The New Horizons spacecraft is still about 880 million kilometers (550 million miles) from Pluto, but on July 1 and 3, 2013, the spacecraft’s LOng Range Reconnaissance Imager (LORRI) was able to detect not only Pluto, but its largest moon, Charon, visible and cleanly separated from Pluto itself. Charon orbits about 19,000 kilometers (12,000 miles) away from Pluto, and seen from New Horizons, that’s only about 0.01 degrees away.

“The image itself might not look very impressive to the untrained eye, but compared to the discovery images of Charon from Earth, these ‘discovery’ images from New Horizons look great!” said New Horizons Project Scientist Hal Weaver. “We’re very excited to see Pluto and Charon as separate objects for the first time from New Horizons.”

The frame on the left in the grouping of images above is an average of six different LORRI images, each taken with an exposure time of 0.1 second. The frame to the right is the same composite image but with Pluto and Charon circled; Pluto is the brighter object near the center and Charon is the fainter object near its 11 o’clock position. The circles also denote the predicted locations of the objects, showing that Charon is where the team expects it to be, relative to Pluto. No other Pluto system objects are seen in these images.

These images are just a hint of what’s to come when New Horizons gets closer to the Pluto system. On July 14, 2015, the spacecraft is scheduled to pass just 12,500 kilometers (7,750 miles) above Pluto’s surface, where LORRI will be able to spot features about the size of a football field.

“We’re excited to have our first pixel on Charon,” said New Horizons Principal Investigator Alan Stern, “but two years from now, near closest approach, we’ll have almost a million pixels on Charon –and I expect we’ll be about a million times happier too!”

Pluto has five known moons (and naming them has been a bit controversial). Will New Horizons find even more?

Source: New Horizons

July 10, 2013December 23, 2015 by Jason Major

ALMA Spots a Nascent Stellar Monster

ALMA/Spitzer image of a monster star in the process of forming

Even though it comprises over 99% of the mass of the Solar System (with Jupiter taking up most of the rest) our Sun is, in terms of the entire Milky Way, a fairly average star. There are lots of less massive stars than the Sun out there in the galaxy, as well as some real stellar monsters… and based on new observations from the Atacama Large Millimeter/submillimeter Array, there’s about to be one more.

Early science observations with ALMA have provided astronomers with the best view yet of a monster star in the process of forming within a dark cloud of dust and gas. Located 11,000 light-years away, Spitzer Dark Cloud 335.579-0.292 is a stellar womb containing over 500 times the mass of the Sun — and it’s still growing. Inside this cloud is an embryonic star hungrily feeding on inwardly-flowing material, and when it’s born it’s expected to be at least 100 times the mass of our Sun… a true stellar monster.

The location of SDC 335.579-0.292 in the southern constellation of Norma (ESO, IAU and Sky & Telescope)

The star-forming region is the largest ever found in our galaxy.

“The remarkable observations from ALMA allowed us to get the first really in-depth look at what was going on within this cloud,” said Nicolas Peretto of CEA/AIM Paris-Saclay, France, and Cardiff University, UK. “We wanted to see how monster stars form and grow, and we certainly achieved our aim! One of the sources we have found is an absolute giant — the largest protostellar core ever spotted in the Milky Way.”

Watch: What’s the Biggest Star in the Universe?

SDC 335.579-0.292 had already been identified with NASA’s Spitzer and ESA’s Herschel space telescopes, but it took the unique sensitivity of ALMA to observe in detail both the amount of dust present and the motion of the gas within the dark cloud, revealing the massive embryonic star inside.

“Not only are these stars rare, but their birth is extremely rapid and their childhood is short, so finding such a massive object so early in its evolution is a spectacular result.”

– Team member Gary Fuller, University of Manchester, UK

The image above, a combination of data acquired by both Spitzer and ALMA (see below for separate images) shows tendrils of infalling material flowing toward a bright center where the huge protostar is located. These observations show how such massive stars form — through a steady collapse of the entire cloud, rather than through fragmented clustering.

SDC 335.579-0.292 seen in different wavelengths of light.

“Even though we already believed that the region was a good candidate for being a massive star-forming cloud, we were not expecting to find such a massive embryonic star at its center,” said Peretto. “This object is expected to form a star that is up to 100 times more massive than the Sun. Only about one in ten thousand of all the stars in the Milky Way reach that kind of mass!”

(Although, with at least 200 billion stars in the galaxy, that means there are still 20 million such giants roaming around out there!)

Our Solar System Has a Tail Shaped Like a Four-Leaf Clover: New Findings from IBEX

IBEX observations of spectral slope, where red and yellow indicate lower energy particles and green and blue higher energy ones. The central portion (circle) is looking down the heliotail and shows two lower energy “lobes” on the port and starboard sides and high energy regions at higher northern and southern latitudes. Figure taken from McComas et al. , Astrophysical Journal, 2013.

Our Solar System is moving through interstellar space and scientists have long thought that the “bubble” around our Solar System – called the heliosphere – might have a tail, similar to how a comet has a tail or how other stars have astrospheres. But that has all been conjecture…. until now.

The IBEX spacecraft (Interstellar Boundary Explorer) has now seen the tail and has mapped out its structure. IBEX scientists were surprised to see the tail has twists and turns, with four separate “lobes,” making it appear somewhat like a four-leaf clover. This downwind region of the heliosphere is called the heliotail.

“Scientists have always presumed that the heliosphere had a tail,” said Eric Christian, IBEX mission scientist, speaking during a Google+ Hangout announcing the new findings. “But this is actually the first real data that we have to give us the shape of the tail.”

IBEX measures the neutral particles created by collisions at the solar system’s boundaries. This technique, called energetic neutral atom imaging, relies on the fact that the paths of neutral particles are not affected by the solar magnetic field. Instead, the particles travel in a straight line from collision to IBEX. Consequently, observing where the neutral particles came from describes what is going on in these distant regions.

“By collecting these energetic neutral atoms, IBEX provides maps of the original charged particles,” said David McComas, lead author on the team’s paper and principal investigator for IBEX at Southwest Research Institute. “The structures in the heliotail are invisible to our eyes, but we can use this trick to remotely image the outermost regions of our heliosphere.”

What they found was unexpected, McComas said.

“By very carefully assembling the statistical observations from the first three years of IBEX data we’ve been able to fill in what we couldn’t see before,” McComas said during the Hangout, “and what we found was that the heliotail was a much larger structure with a much more interesting configuration.

What they found was a tail that appears to have a combination of fast and slow moving particles. There are two lobes of slower particles on the sides, with faster particles above and below. The entire structure is twisted from the pushing and pulling of magnetic fields outside the solar system. McComas likened it to a how a beach ball might twist around if it was attached to a bungee cord.

Our heliosphere. Credit: IBEX Team/Adler Planetarium

The IBEX scientists speaking during the Hangout today said this new information will help us understand what the Voyager spacecraft may encounter as they reach the edge of our Solar System.

“IBEX and Voyager are incredibly complimentary missions,” said Christian. “I’ve often said that IBEX is like an MRI, where it can take an image to understand the big picture of what is going on, where the Voyagers are like biopsies, where we can see what is going on in the local area.”

This was the first time a NASA used a Google+ Hangout to broadcast a press briefing. You can watch the full Hangout below:

You can read David McComas’ blog post on the new findings here, and NASA’s press release here.

July 10, 2013April 26, 2016 by Bob King

Auroras Dance Over Northern U.S. Last Night, May Return Tonight

A thick green arc of aurora settled in for the night last night. It was about 5 degrees thick and some 10 degrees high. A faint but colorful diffuse aurora glowed above it. All photos taken with a 16-35 mm lens at f/2.8 and 30-second time exposure. Credit: Bob King

A burst of energetic particles from the Sun called a coronal mass ejection peppered Earth’s magnetic field yesterday afternoon sparking a modest but beautiful all-night display of the aurora borealis. Another light show may be in the offing tonight for skywatchers living in the northern U.S., Canada and northern Europe.

Around 1 a.m. the arc became more active, sending up occasional rays that lasted from about a minute before fading away and being replaced by another. Credit: Bob King

Pale green fingers of light splayed across the northern sky at twilight’s end came as a surprise. NOAA space weather forecasters had predicted little activity. These soon faded but a thick, fuzzy arc persisted throughout the night. It arched from horizon to horizon across the northern sky like a pallid, monochromatic rainbow. Such arcs are common. Often the aurora never gets past this stage and simmers quietly or even fades away during the night.

Not this one. Around local midnight (1 a.m. CDT) here in Duluth, Minn. small bright spots and a series of tall, faint rays punctuated the arc and over the span of a half-hour completely reshaped it into loopy rayed arcs resembling a crown.

I wasn't alone when the northern lights peaked about 1:20-2 a.m. At upper left you'll see the trails of a couple of fireflies. Credit: Bob King — I wasn’t alone when the northern lights peaked about 1:20-2 a.m. At upper left you’ll see the trails of a couple of fireflies. Credit: Bob King

To the eye, the brightest parts of the aurora appeared green, but the taffy-stretched rays were colorless. The camera’s sensitivity coupled with a 30-second time exposure revealed striking pinks and hints of blue. Both pink and green colors are caused by the emission of light from oxygen atoms.

An especially beautiful ray sticks up above the arc. Shorter exposures coupled with shorter shutter speeds are the best way to capture fine details of a northern lights display. Credit: Bob King

Bombarded by high-speed solar wind electrons and protons, they get jazzed into higher energy states. When the atoms return to rest, each spits out a photon of green or red light. All those tiny flashes add up. Multiplied by the billions of atoms that exist even in the rarefied air at the aurora’s typical 60-150 mile (100-250 km) altitude and you get heavenly eye candy.

When we see an auroral arc - and associated rays - we really seeing a small section of the much larger, permanent aurora called the auroral oval. The northern oval is centered over the geomagnetic north pole located in northern Canada. Credit: NASA — When we see an auroral arc – and associated rays – we really seeing a small section of the much larger, permanent aurora called the auroral oval. The northern oval is centered over the geomagnetic north pole located in northern Canada. Credit: NASA

I started watching the northern lights at 11 from home then took a drive to darker skies. Even at dawn’s 3 a.m. start, the green arc held its own shot through with rays that occasionally towered halfway up the northern sky. While this display wasn’t a grand spectacle like some auroras, it possessed a certain majesty the same way a long, slow movement concludes a great symphony.

Chances for more of the same continues through tonight and possibly into tomorrow, so keep a watch on the northern sky before you hit the hay tonight. If you see something green and glowing it you might be in for a treat.

In another installment, I’ll share tips on how best to see the northern lights and share several excellent tools you can use for predicting when they might occur.

July 10, 2013April 26, 2016 by Nancy Atkinson

Astrophoto: Airglow Shining Like an Aurora

The Milky Way and airglow seen in the Dark Sky Alqueva Reserve in Portugal. Credit and copyright: Miguel Claro.

Look closely at this beautiful serene view taken by Miguel Claro from Portugal. Not only is it a stunning view of the skies over Lake Alqueva in the Dark Sky Alqueva Reserve in Portugal, but there are also several scientifically interesting features here. Of course, visible is the arc of the Milky Way, filled with colors and light. Seen here is the most central region of the Milky Way, located near the constellations of Scorpio and Sagittarius, where you might recognize many deep sky objects like the Lagoon Nebula (M8) and the Trifid Nebula (M20).

The “glow” seen here is not the aurora borealis, but instead it is airglow (atmospheric chemiluminescence), which is a photochemical reaction that occurs high in the atmosphere when various atoms get excited from the ultraviolet radiation from the Sun. Miguel explained via email that the yellow light is from emissions from sodium atoms in a layer at 92 km, and above it, is green light from oxygen atoms in a layer 90-100 km high. This emission layer is clearly visible from earth orbit, which we’ve seen in many images and videos taken from the ISS.

An annotated version of the Milky Way and airglow seen in the Dark Sky Alqueva Reserve in Portugal. Credit and copyright: Miguel Claro.

“Reflected in the peaceful lake and due to the polarization effect of water, we could clearly see the entire constellation of Scorpius with the real color of each star naturally saturated,” Miguel said via email, “due to this polarization and blurred effect, caused by the slowly movement of water during the long exposure. The orange color of the Red Supergiant Antares could be easily distinguished from the blue color of the Subgiant star, Shaula, in the end of tail.”

Miguel used a Canon 60Da – ISO 1600; 35mm lens at f/2; Exp. 15 secs. Mosaic of 23 images, taken on June 15, at 02:35 AM.

You can see another image on Miguel’s website taken on the same night and place, where airglow is visible with the Andromeda Galaxy (M31) and still another with the Big Dipper and gravity waves with the airglow.

July 10, 2013December 23, 2015 by Ken Kremer

NASA’s 2020 Mars Rover To Seek Signs of Past Life and Collect Samples for Earth Return

Artist's Concept of NASA’s Mars 2020 Rover envisions a basic structure that capitalizes on re-using the design and engineering work done for the NASA rover Curiosity, which landed on Mars in 2012, but with new science instruments for accomplishing different science objectives with the 2020 mission. Credit: NASA/JPL-Caltech

NASA’s next Mars rover set for liftoff in 2020 should focus on three primary objectives; seeking signs of past life, collecting a cache of carefully chosen samples for eventual return to Earth and developing technologies that will help enable future human missions to the Red Planet some two decades from now.

The 2020 goals were laid out publicly today (July 9) by a panel of scientists on the ‘Science Definition Team’ and charged by NASA with defining the key science objectives for the new mission.

The science objectives and how to accomplish them are outlined in considerable detail in a newly issued 154 page report handed over to the space agency and discussed at today’s NASA briefing for the media.

Looking for signs of ancient life and preserved biosignatures on Mars at a place that was once habitable is the top priority of the 2020 mission. The SDT report states that the landing site should be chosen specifically to “explore the geology of a once habitable site.”

“We need a highly mobile rover that can make ‘in situ’ science measurements,” said Jack Mustard, chairman of the Science Definition Team and a professor at the Geological Sciences at Brown University in Providence, R.I., at the briefing.

“The rover would use its own instruments on Mars for visual, mineralogical and chemical analysis down to a microscopic scale to identify candidate features that may have been formed by past life,” states the SDT report.

“We can’t do this now with Curiosity,” explained Mustard. “We need higher resolution.”

Looking for ‘extant’ life, that is life surviving on Mars today, would be a by-product of the search for organic molecules and preserved biosignatures of life – past or present.

The Mars 2020 ‘Science Definition Team’ (SDT) is comprised of 19 scientists and engineers from academia and industry. They were appointed by NASA in January 2013 to thoroughly and quickly evaluate a wide range of options to accomplish the highest priority planetary science objectives and achieve President Obama’s challenge to send humans to Mars in the 2030s.

Retrieving soil and rock samples from Mars for analysis back on Earth by research teams worldwide using all the most advanced analytical instruments available to humankind with unprecedented capability has been the ‘Holy Grail’ of Mars exploration for several decades.

But the enormous cost and technical complexity of a Mars Sample Return (MSR) mission has caused it to be repeatedly postponed.

Creating a Returnable Cache of Martian Samples is a major objective for NASA's Mars 2020 rover. This prototype show hardware to cache samples of cores drilled from Martian rocks for possible future return to Earth. The 2020 rover would be to collect and package a carefully selected set of up to 31 samples in a cache that could be returned to Earth by a later mission. The capabilities of laboratories on Earth for detailed examination of cores drilled from Martian rocks would far exceed the capabilities of any set of instruments that could feasibly be flown to Mars. The exact hardware design for the 2020 mission is yet to be determined. For scale, the diameter of the core sample shown in the image is 0.4 inch (1 centimeter). Credit: NASA/JPL-Caltech — Creating a Returnable Cache of Martian Samples is a major objective for NASA’s Mars 2020 rover. This prototype show hardware to cache samples of cores drilled from Martian rocks for possible future return to Earth. The 2020 rover would be to collect and package a carefully selected set of up to 31 samples in a cache that could be returned to Earth by a later mission. The capabilities of laboratories on Earth for detailed examination of cores drilled from Martian rocks would far exceed the capabilities of any set of instruments that could feasibly be flown to Mars. The exact hardware design for the 2020 mission is yet to be determined. For scale, the diameter of the core sample shown in the image is 0.4 inch (1 centimeter). Credit: NASA/JPL-Caltech

The 2020 rover will be designed to make real progress on sample return for the first time. It will be capable of coring into rocks and storing 31 highly compelling Martian samples for return by a follow on mission to the Red Planet.

“But the timing on actually returning those samples to Earth is yet to be determined,” said John Grunsfeld, NASA’s associate administrator for science in Washington.

Everything NASA does is budget driven and the fiscal climate is rather gloomy right now.

“Crafting the science and exploration goals is a crucial milestone in preparing for our next major Mars mission,” said John Grunsfeld, NASA’s associate administrator for science in Washington, in a statement.

Work on the new rover must begin soon in order to achieve the mandatory 2020 launch deadline. Launch opportunities to Mars only open every 26 months and delays could balloon the costs by several hundred million dollars.

“The objectives determined by NASA with the input from this team will become the basis later this year for soliciting proposals to provide instruments to be part of the science payload on this exciting step in Mars exploration,” adds Grunsfeld.

“The 2020 rover will take a major step in ‘seeking signs of life” said Jim Green, director of NASA’s Planetary Science Division in Washington, at the briefing. “NASA will issue a call for science instruments this fall.”

The new mission would build upon the demonstrated science accomplishments of earlier missions like Curiosity, Spirit, Opportunity and Phoenix while vastly advancing the capabilities of the robots research instruments.

“Here’s the bottom line. Questions drive science,” explained Lindy Elkins-Tanton, SDT member and director of the Carnegie Institution for Science’s Department of Terrestrial Magnetism, Washington.

“We should be seeking to answer the very biggest questions. And one of the very biggest questions for all of humankind is – ‘Are we alone?’ And that is the question we’re hoping to make really big advances with on with this Mars 2020 mission.”

Grunsfeld explained that NASA has budgeted “for a mission cost of $1.5 Billion plus the cost of the launcher.”

The 2020 rover chassis, with some modifications, will be based on the blueprints of the highly successful Curiosity rover to keep down the cost and minimize risks. But the science instruments will be completely new and updated.

NASA’s 1 ton Curiosity rover touched down nearly a year ago and has already discovered that the Red Planet has the chemical ingredients and environmental conditions for a habitable zone that could have supported living Martian microbes.

The next logical step is to look for the ancient signs of life that would be preserved in the rock record on Mars.

Ken Kremer

This photomosic shows NASA’s Curiosity departing at last for Mount Sharp- her main science destination. Note the wheel tracks on the Red Planet’s surface. The navcam camera images were taken on July 4, 2013 (Sol 324). Credit: NASA/JPL-Caltech/Ken Kremer (kenkremer.com)/Marco Di Lorenzo — NASA’s 2020 Mars rover would be based on the Curiosity rover which touched down inside Gale Crater on Aug. 6, 2012 and discovered a habitable zone here. This photomosic shows NASA’s Curiosity departing Glenelg work site area at last for Mount Sharp- her main science destination, seen at top left. Note the wheel tracks on the Red Planet’s surface. The mosaic of navcam camera images was stitched from photos taken on July 4, 2013 (Sol 324). Credit: NASA/JPL-Caltech/Ken Kremer (kenkremer.com)/Marco Di Lorenzo

July 10, 2013July 10, 2013 by Nancy Atkinson

How to Wash Your (Long) Hair in Space

Those of us with long tresses have wondered, how do you wash that floating mass of hair in space? Astronaut and Expedition 36 crewmember Karen Nyberg provides a how-to video direct from the International Space Station. Obviously, Nyberg’s crewmate Luca Parmitano doesn’t have to go through this process.

But wash your hair today, have drinking water or coffee tomorrow!

July 9, 2013December 23, 2015 by Ken Kremer

NASA Alters 1st Orion/SLS Flight – Bold Upgrade to Deep Space Asteroid Harbinger Planned

NASA Orion spacecraft blasts off atop 1st Space Launch System rocket in 2017 - attached to European provided service module – on an enhanced m mission to Deep Space where an asteroid could be relocated as early as 2021. Credit: NASA

NASA Orion spacecraft blasts off atop 1st Space Launch System rocket in 2017 – attached to European provided service module – on an ambitious mission to explore Deep Space some 40,000 miles beyond the Moon, where an asteroid could be relocated as early as 2021. Credit: NASA
Story updated with further details[/caption]

NASA managers have announced a bold new plan to significantly alter and upgrade the goals and complexity of the 1st mission of the integrated Orion/Space Launch System (SLS) human exploration architecture – planned for blastoff in late 2017.

The ambitious first flight, called Exploration Mission 1 (EM-1), would be targeted to send an unpiloted Orion spacecraft to a point more than 40,000 miles (70,000 kilometers) beyond the Moon as a forerunner supporting NASA’s new Asteroid Redirect Initiative – recently approved by the Obama Administration.

The EM-1 flight will now serve as an elaborate harbinger to NASA’s likewise enhanced EM-2 mission, which would dispatch a crew of astronauts for up close investigation of a small Near Earth Asteroid relocated to the Moon’s vicinity.

Orion crew module separates from Space Launch System (SLS) upper stage. Credit: NASA

Until recently NASA’s plan had been to launch the first crewed Orion atop the 2nd SLS rocket in 2021 to a high orbit around the moon on the EM-2 mission, said NASA Associate Administrator Lori Garver in an prior interview with me at the Kennedy Space Center.

Concept of NASA spacecraft with Asteroid capture mechanism deployed to redirect a small space rock to a stable lunar orbit for later study by astronauts aboard Orion crew capsule. Credit: NASA.

The enhanced EM-1 flight would involve launching an unmanned Orion, fully integrated with the Block 1 SLS to a Deep Retrograde Orbit (DRO) near the moon, a stable orbit in the Earth-moon system where an asteroid could be moved to as early as 2021.

Orion’s mission duration would be nearly tripled to 25 days from the original 10 days.

“The EM-1 mission with include approximately nine days outbound, three to six days in deep retrograde orbit and nine days back,” Brandi Dean, NASA Johnson Space Center spokeswoman told Universe Today exclusively.

The proposed much more technologically difficult EM-1 mission would allow for an exceptionally more vigorous work out and evaluation of the design of all flight systems for both Orion and SLS before risking a flight with humans aboard.

A slew of additional thruster firings would exercise the engines to change orbital parameters outbound, around the moon and inbound for reentry.

The current Deep Retrograde Orbit (DRO) plan includes several thruster firings from the Orion service module, including a powered lunar flyby, an insertion at DRO, an extraction maneuver from the DRO and a powered flyby on return to Earth.

Orion would be outfitted with sensors to collect a wide variety of measurements to evaluate its operation in the harsh space environment.

“EM-1 will have a compliment of both operational flight instrumentation and development flight instrumentation. This instrumentation suite gives us the ability to measure many attributes of system functionality and performance, including thermal, stress, displacement, acceleration, pressure and radiation,” Dean told me.

The EM-1 flight has many years of planning and development ahead and further revisions prior to the 2017 liftoff are likely.

“Final flight test objectives and the exact set of instrumentation required to meet those objectives is currently under development,” Dean explained.

Orion is NASA’s next generation manned space vehicle following the retirement of NASA’s trio of Space Shuttles in 2011.

The SLS launcher will be the most powerful and capable rocket ever built by humans – exceeding the liftoff thrust of the Apollo era Moon landing booster, the mighty Saturn V.

“We sent Apollo around the moon before we landed on it and tested the space shuttle’s landing performance before it ever returned from space.” said Dan Dumbacher, NASA’s deputy associate administrator for exploration systems development, in a statement.

“We’ve always planned for EM-1 to serve as the first test of SLS and Orion together and as a critical step in preparing for crewed flights. This change still gives us that opportunity and also gives us a chance to test operations planning ahead of our mission to a relocated asteroid.”

Both Orion and SLS are under active and accelerating development by NASA and its industrial partners.

The 1st Orion capsule is slated to blast off on the unpiloted EFT-1 test flight in September 2014 atop a Delta IV Heavy rocket on a two orbit test flight to an altitude of 3,600 miles above Earth’s surface.

Technicians work on mockups of the Orion crew capsule, Service Module and 6 ton Launch Abort System (LAS) to simulate critical assembly techniques inside the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center (KSC) in Florida for the EFT-1 mission due to liftoff in September 2014. Credit: Ken Kremer/kenkremer.com

It will then reenter Earth’s atmosphere at speeds of about 20,000 MPH (11 km/sec) and endure temperatures of 4,000 degrees Fahrenheit in a critical test designed to evaluate the performance of Orion’s heatshield and numerous spacecraft systems.

Orion EFT-1 is already under construction at the Kennedy Space Center (KSC) by prime contractor Lockheed Martin – read my earlier story here.

Integration and stacking tests with Orion’s emergency Launch Abort System are also in progress at KSC – details here.

NASA says the SLS is also in the midst of a extensive review process called the Preliminary Design Review (PDR) to ensure that all launch vehicle components and systems will achieve the specified performance targets and be completed in time to meet the 2017 launch date. The PDR will be completed later this summer.

NASA’s goal with Orion/SLS is to send humans to the Moon and other Deep Space destinations like Asteroids and Mars for the first time in over forty years since the final manned lunar landing by Apollo 17 back in 1972.

NASA Headquarters will make a final decision on upgrading the EM-1 mission after extensive technical reviews this summer.

Ken Kremer

Schematic of Orion components. Credit: NASA

July 9, 2013December 23, 2015 by Nancy Atkinson

Opening Sequence of Today’s ISS Spacewalk Highlight Video Will Knock Your Space Socks Off

Astronaut Karen Nyberg helps Chris Cassidy (left) and Luca Parmitano suit up for their spacewalk on July 9, 2013. Credit: NASA

Want a “you are there” view of today’s EVA that took place outside the International Space Station? Take a look at this great video of astronaut Chris Cassidy getting a ride on the station’s Canadarm-2 to make repairs and prepare for a new Russian laboratory. There are several great “over the shoulder” views during this short highlight video.

During their 6-hour and 7-minute spacewalk, Cassidy of NASA and Luca Parmitano of the European Space Agency worked on replacing a failed communications receiver, relocating grapple bars for future spacewalks and stringing cables for the when the Russian laboratory module arrives later this year.

The Ku-band communications receiver replaces one that failed last December. There was already a redundant backup system now in use, and this new one will become the backup.

The new Russian lab, called Nauka, will replace the Pirs airlock. It is scheduled to launch on a Proton rocket booster late this year, although the flight could be delayed a bit until early next year as because of assembly delays in Russia.

This spacewalk was the first of two in as many weeks for the duo. They will again venture outside the Quest airlock on July 16 for more upgrades and repairs. This was Parmitano’s first spacewalk, and he has now become the first Italian astronaut to walk in space. Old pro Cassidy has now been on five spacewalks, and this was the 170th spacewalk in support of space station assembly and maintenance.